From patchwork Wed Jan 10 11:40:29 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jie Luo X-Patchwork-Id: 13516082 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 37AB2C4707B for ; Wed, 10 Jan 2024 11:45:12 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=4+P0x1tH6JQog7Zp3Xw4eDAWhjlBOqDQjpJ2Jj5tRkg=; b=gAJI7/eEjXWwyE iwaKc9VmgcY7CGSAFKxt4039QCqWj/F7L1QN/T/vPNCFnwkHSmEkHrY/YhWiKF3R6dTIZ54aAvkWG uDvQnD9wPI1sg5vJlceHlDp3BUd3W2BNdu/QhD7rE8wk1m4aI26o4oY2H7FiM/1ICKnAWR2zbyvkg eUWAWOFMDdg0OpXuUM0GvHKDwDBn6sYtvTWRhVz3CzDchoX6l6Gt8kfIe2Qhqz0iWKWy01MLBWDq1 DalnIftd6qvUwZ36sHNKs7cmOUYM4qDw61kP+6cnJwKIEuDmRTpWlc+/uH/jp8Uwh1JWmzvCboese IRnnMZhN2NhpIQ4zdxFQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1rNX0c-00BUkO-3C; Wed, 10 Jan 2024 11:44:35 +0000 Received: from mx0b-0031df01.pphosted.com ([205.220.180.131]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1rNX0W-00BUex-24 for linux-arm-kernel@lists.infradead.org; Wed, 10 Jan 2024 11:44:33 +0000 Received: from pps.filterd (m0279868.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.24/8.17.1.24) with ESMTP id 40AAhJ54012660; Wed, 10 Jan 2024 11:43:58 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h= from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding:content-type; s= qcppdkim1; bh=mR0EQunaFH97FyG1JaAfwzha9HvZ8unUPHG4d5bgYm8=; b=PZ cGDNpUKDe0AjzqPjYeNAInfGqMBFuLQZtG6RnN53FNRRNFNwtHKjvrET54D40tKz HLNb4F3FlbHx3CxU7t2YLWxl5nBLlAPuQnsNZBqduz1gBW4cUKWiMy6ZGiSOK3D1 BVTfh6feWBqkuQ56XgZ6EU2AVXpD7lpJ1QvAxtE2O76xVaH/BpsgrklFB2hfZsNb OuYRXtkA31XlZf4cTtDkJOoim202vpPoKPNVcO0XONwdeGQpcpoJngnf/SNTFhjx GxF/M6awEQMG9xHSl4t6mhFKTkIXvvaqgjQHmXw1vY80c254P7YEJoODo8BaIdfS QpbWlHLaQF8N8gLw5ODA== Received: from nalasppmta05.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3vhsqyr4by-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 10 Jan 2024 11:43:58 +0000 (GMT) Received: from nalasex01c.na.qualcomm.com (nalasex01c.na.qualcomm.com [10.47.97.35]) by NALASPPMTA05.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 40ABhuXu020445 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 10 Jan 2024 11:43:56 GMT Received: from akronite-sh-dev02.qualcomm.com (10.80.80.8) by nalasex01c.na.qualcomm.com (10.47.97.35) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.40; Wed, 10 Jan 2024 03:43:46 -0800 From: Luo Jie To: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , CC: , , , , , , , , , , , , , , Subject: [PATCH net-next 17/20] net: ethernet: qualcomm: Add PPE UNIPHY support for phylink Date: Wed, 10 Jan 2024 19:40:29 +0800 Message-ID: <20240110114033.32575-18-quic_luoj@quicinc.com> X-Mailer: git-send-email 2.42.0 In-Reply-To: <20240110114033.32575-1-quic_luoj@quicinc.com> References: <20240110114033.32575-1-quic_luoj@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01a.na.qualcomm.com (10.52.223.231) To nalasex01c.na.qualcomm.com (10.47.97.35) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: UzY1SN_vGJVQmRfWn1VIHp-WRDy6hzEd X-Proofpoint-ORIG-GUID: UzY1SN_vGJVQmRfWn1VIHp-WRDy6hzEd X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-09_02,2023-12-07_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxscore=0 suspectscore=0 lowpriorityscore=0 bulkscore=0 clxscore=1015 phishscore=0 adultscore=0 mlxlogscore=999 spamscore=0 priorityscore=1501 impostorscore=0 malwarescore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2311290000 definitions=main-2401100096 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20240110_034428_841414_A816C8DD X-CRM114-Status: GOOD ( 31.55 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org From: Lei Wei This driver adds support for PPE UNIPHY initialization and UNIPHY PCS operations which used by phylink. PPE supports maximum 6 GMAC or XGMAC ports which can be connected with maximum 3 UNIPHYs. The UNIPHY registers and provides raw clock to feeds NCCSS clocks to provide different clocks to PPE ports in different link speed. Signed-off-by: Lei Wei Signed-off-by: Luo Jie --- drivers/net/ethernet/qualcomm/ppe/Makefile | 2 +- drivers/net/ethernet/qualcomm/ppe/ppe.c | 25 + drivers/net/ethernet/qualcomm/ppe/ppe.h | 2 + .../net/ethernet/qualcomm/ppe/ppe_uniphy.c | 789 ++++++++++++++++++ .../net/ethernet/qualcomm/ppe/ppe_uniphy.h | 227 +++++ include/linux/soc/qcom/ppe.h | 1 + 6 files changed, 1045 insertions(+), 1 deletion(-) create mode 100644 drivers/net/ethernet/qualcomm/ppe/ppe_uniphy.c create mode 100644 drivers/net/ethernet/qualcomm/ppe/ppe_uniphy.h diff --git a/drivers/net/ethernet/qualcomm/ppe/Makefile b/drivers/net/ethernet/qualcomm/ppe/Makefile index 516ea23443ab..487f62d5e38c 100644 --- a/drivers/net/ethernet/qualcomm/ppe/Makefile +++ b/drivers/net/ethernet/qualcomm/ppe/Makefile @@ -4,4 +4,4 @@ # obj-$(CONFIG_QCOM_PPE) += qcom-ppe.o -qcom-ppe-objs := ppe.o ppe_ops.o ppe_debugfs.o +qcom-ppe-objs := ppe.o ppe_ops.o ppe_debugfs.o ppe_uniphy.o diff --git a/drivers/net/ethernet/qualcomm/ppe/ppe.c b/drivers/net/ethernet/qualcomm/ppe/ppe.c index 04f80589c05b..21040efe71fc 100644 --- a/drivers/net/ethernet/qualcomm/ppe/ppe.c +++ b/drivers/net/ethernet/qualcomm/ppe/ppe.c @@ -18,6 +18,7 @@ #include "ppe_regs.h" #include "ppe_ops.h" #include "ppe_debugfs.h" +#include "ppe_uniphy.h" #define PPE_SCHEDULER_PORT_NUM 8 #define MPPE_SCHEDULER_PORT_NUM 3 @@ -176,6 +177,26 @@ int ppe_type_get(struct ppe_device *ppe_dev) return ppe_dev_priv->ppe_type; } +struct clk **ppe_clock_get(struct ppe_device *ppe_dev) +{ + struct ppe_data *ppe_dev_priv = ppe_dev->ppe_priv; + + if (!ppe_dev_priv) + return NULL; + + return ppe_dev_priv->clk; +} + +struct reset_control **ppe_reset_get(struct ppe_device *ppe_dev) +{ + struct ppe_data *ppe_dev_priv = ppe_dev->ppe_priv; + + if (!ppe_dev_priv) + return NULL; + + return ppe_dev_priv->rst; +} + static int ppe_clock_set_enable(struct ppe_device *ppe_dev, enum ppe_clk_id clk_id, unsigned long rate) { @@ -1405,6 +1426,10 @@ static int qcom_ppe_probe(struct platform_device *pdev) ret, "ppe device hw init failed\n"); + ppe_dev->uniphy = ppe_uniphy_setup(pdev); + if (IS_ERR(ppe_dev->uniphy)) + return dev_err_probe(&pdev->dev, ret, "ppe uniphy initialization failed\n"); + ppe_dev->ppe_ops = &qcom_ppe_ops; ppe_dev->is_ppe_probed = true; ppe_debugfs_setup(ppe_dev); diff --git a/drivers/net/ethernet/qualcomm/ppe/ppe.h b/drivers/net/ethernet/qualcomm/ppe/ppe.h index 828d467540c9..45b70f47cd21 100644 --- a/drivers/net/ethernet/qualcomm/ppe/ppe.h +++ b/drivers/net/ethernet/qualcomm/ppe/ppe.h @@ -173,6 +173,8 @@ struct ppe_scheduler_port_resource { }; int ppe_type_get(struct ppe_device *ppe_dev); +struct clk **ppe_clock_get(struct ppe_device *ppe_dev); +struct reset_control **ppe_reset_get(struct ppe_device *ppe_dev); int ppe_write(struct ppe_device *ppe_dev, u32 reg, unsigned int val); int ppe_read(struct ppe_device *ppe_dev, u32 reg, unsigned int *val); diff --git a/drivers/net/ethernet/qualcomm/ppe/ppe_uniphy.c b/drivers/net/ethernet/qualcomm/ppe/ppe_uniphy.c new file mode 100644 index 000000000000..3a2b6fc77a9c --- /dev/null +++ b/drivers/net/ethernet/qualcomm/ppe/ppe_uniphy.c @@ -0,0 +1,789 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/* PPE UNIPHY clock register and UNIPHY PCS operations for phylink. + * + * The PPE UNIPHY block is specifically used by PPE to connect the PPE MAC + * with the external PHYs or SFPs or Switches (fixed link). The PPE UNIPHY + * block includes serdes, PCS or XPCS and the control logic to support PPE + * ports to work in different interface mode and different link speed. + * + * The PPE UNIPHY block provides raw clock as the parent clock to NSSCC + * clocks and the NSSCC clocks can be configured to generate different + * port Tx and Rx clocks to PPE ports in different port link speed. + */ + +#include +#include +#include +#include +#include "ppe.h" +#include "ppe_uniphy.h" + +/* UNIPHY clock direction */ +enum { + UNIPHY_RX = 0, + UNIPHY_TX, +}; + +/* UNIPHY clock data type */ +struct clk_uniphy { + struct clk_hw hw; + u8 index; + u8 dir; + unsigned long rate; +}; + +#define to_clk_uniphy(_hw) container_of(_hw, struct clk_uniphy, hw) +/* UNIPHY clock rate */ +#define UNIPHY_CLK_RATE_125M 125000000 +#define UNIPHY_CLK_RATE_312P5M 312500000 + +static void ppe_uniphy_write(struct ppe_uniphy *uniphy, u32 val, u32 reg) +{ + if (reg >= UNIPHY_INDIRECT_ADDR_START) { + writel(FIELD_GET(UNIPHY_INDIRECT_ADDR_HIGH, reg), + uniphy->base + UNIPHY_INDIRECT_AHB_ADDR); + writel(val, uniphy->base + UNIPHY_INDIRECT_DATA_ADDR(reg)); + } else { + writel(val, uniphy->base + reg); + } +} + +static u32 ppe_uniphy_read(struct ppe_uniphy *uniphy, u32 reg) +{ + if (reg >= UNIPHY_INDIRECT_ADDR_START) { + writel(FIELD_GET(UNIPHY_INDIRECT_ADDR_HIGH, reg), + uniphy->base + UNIPHY_INDIRECT_AHB_ADDR); + return readl(uniphy->base + UNIPHY_INDIRECT_DATA_ADDR(reg)); + } else { + return readl(uniphy->base + reg); + } +} + +static int ppe_uniphy_mask(struct ppe_uniphy *uniphy, u32 reg, u32 mask, u32 set) +{ + u32 val; + + val = ppe_uniphy_read(uniphy, reg); + val &= ~mask; + val |= set; + ppe_uniphy_write(uniphy, val, reg); + + return 0; +} + +static unsigned long clk_uniphy_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_uniphy *uniphy = to_clk_uniphy(hw); + + return uniphy->rate; +} + +static int clk_uniphy_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + if (req->rate <= UNIPHY_CLK_RATE_125M) + req->rate = UNIPHY_CLK_RATE_125M; + else + req->rate = UNIPHY_CLK_RATE_312P5M; + + return 0; +} + +static int clk_uniphy_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_uniphy *uniphy = to_clk_uniphy(hw); + + if (rate != UNIPHY_CLK_RATE_125M && rate != UNIPHY_CLK_RATE_312P5M) + return -1; + + uniphy->rate = rate; + + return 0; +} + +static const struct clk_ops clk_uniphy_ops = { + .recalc_rate = clk_uniphy_recalc_rate, + .determine_rate = clk_uniphy_determine_rate, + .set_rate = clk_uniphy_set_rate, +}; + +static struct clk_uniphy uniphy0_gcc_rx_clk = { + .hw.init = &(struct clk_init_data){ + .name = "uniphy0_gcc_rx_clk", + .ops = &clk_uniphy_ops, + }, + .index = 0, + .dir = UNIPHY_RX, + .rate = UNIPHY_CLK_RATE_125M, +}; + +static struct clk_uniphy uniphy0_gcc_tx_clk = { + .hw.init = &(struct clk_init_data){ + .name = "uniphy0_gcc_tx_clk", + .ops = &clk_uniphy_ops, + }, + .index = 0, + .dir = UNIPHY_TX, + .rate = UNIPHY_CLK_RATE_125M, +}; + +static struct clk_uniphy uniphy1_gcc_rx_clk = { + .hw.init = &(struct clk_init_data){ + .name = "uniphy1_gcc_rx_clk", + .ops = &clk_uniphy_ops, + }, + .index = 1, + .dir = UNIPHY_RX, + .rate = UNIPHY_CLK_RATE_312P5M, +}; + +static struct clk_uniphy uniphy1_gcc_tx_clk = { + .hw.init = &(struct clk_init_data){ + .name = "uniphy1_gcc_tx_clk", + .ops = &clk_uniphy_ops, + }, + .index = 1, + .dir = UNIPHY_TX, + .rate = UNIPHY_CLK_RATE_312P5M, +}; + +static struct clk_uniphy uniphy2_gcc_rx_clk = { + .hw.init = &(struct clk_init_data){ + .name = "uniphy2_gcc_rx_clk", + .ops = &clk_uniphy_ops, + }, + .index = 2, + .dir = UNIPHY_RX, + .rate = UNIPHY_CLK_RATE_312P5M, +}; + +static struct clk_uniphy uniphy2_gcc_tx_clk = { + .hw.init = &(struct clk_init_data){ + .name = "uniphy2_gcc_tx_clk", + .ops = &clk_uniphy_ops, + }, + .index = 2, + .dir = UNIPHY_TX, + .rate = UNIPHY_CLK_RATE_312P5M, +}; + +static struct clk_hw *uniphy_raw_clks[] = { + &uniphy0_gcc_rx_clk.hw, &uniphy0_gcc_tx_clk.hw, + &uniphy1_gcc_rx_clk.hw, &uniphy1_gcc_tx_clk.hw, + &uniphy2_gcc_rx_clk.hw, &uniphy2_gcc_tx_clk.hw, +}; + +int ppe_uniphy_port_gcc_clock_en_set(struct ppe_uniphy *uniphy, int port, bool enable) +{ + struct clk **clock = ppe_clock_get(uniphy->ppe_dev); + enum ppe_clk_id rx_id, tx_id; + int err = 0; + + rx_id = PPE_UNIPHY_PORT1_RX_CLK + ((port - 1) << 1); + tx_id = PPE_UNIPHY_PORT1_TX_CLK + ((port - 1) << 1); + + if (enable) { + if (!IS_ERR(clock[rx_id])) { + err = clk_prepare_enable(clock[rx_id]); + if (err) { + dev_err(uniphy->ppe_dev->dev, + "Failed to enable uniphy port %d rx_clk(%d)\n", + port, rx_id); + return err; + } + } + + if (!IS_ERR(clock[tx_id])) { + err = clk_prepare_enable(clock[tx_id]); + if (err) { + dev_err(uniphy->ppe_dev->dev, + "Failed to enable uniphy port %d tx_clk(%d)\n", + port, tx_id); + return err; + } + } + } else { + clk_disable_unprepare(clock[rx_id]); + clk_disable_unprepare(clock[tx_id]); + } + + return 0; +} + +static int ppe_uniphy_interface_gcc_clock_en_set(struct ppe_uniphy *uniphy, bool enable) +{ + int ppe_type = ppe_type_get(uniphy->ppe_dev); + int port = 0; + + switch (uniphy->index) { + case 2: + ppe_uniphy_port_gcc_clock_en_set(uniphy, PPE_PORT6, enable); + break; + case 1: + if (ppe_type == PPE_TYPE_APPE) + ppe_uniphy_port_gcc_clock_en_set(uniphy, PPE_PORT5, enable); + else if (ppe_type == PPE_TYPE_MPPE) + ppe_uniphy_port_gcc_clock_en_set(uniphy, PPE_PORT2, enable); + break; + case 0: + if (ppe_type == PPE_TYPE_APPE) { + for (port = PPE_PORT1; port <= PPE_PORT4; port++) + ppe_uniphy_port_gcc_clock_en_set(uniphy, port, enable); + } else if (ppe_type == PPE_TYPE_MPPE) { + ppe_uniphy_port_gcc_clock_en_set(uniphy, PPE_PORT1, enable); + } + break; + default: + break; + } + + return 0; +} + +static int ppe_uniphy_gcc_xpcs_reset(struct ppe_uniphy *uniphy, bool enable) +{ + struct reset_control **reset = ppe_reset_get(uniphy->ppe_dev); + enum ppe_rst_id id = PPE_UNIPHY0_XPCS_RST + uniphy->index; + + if (IS_ERR(reset[id])) + return PTR_ERR(reset[id]); + + if (enable) + return reset_control_assert(reset[id]); + else + return reset_control_deassert(reset[id]); +} + +static int ppe_uniphy_gcc_software_reset(struct ppe_uniphy *uniphy) +{ + struct reset_control **reset = ppe_reset_get(uniphy->ppe_dev); + int ppe_type = ppe_type_get(uniphy->ppe_dev); + unsigned int index = uniphy->index; + int err = 0, port = 0; + + /* Assert uniphy sys reset control */ + if (!IS_ERR(reset[PPE_UNIPHY0_SYS_RST + index])) { + err = reset_control_assert(reset[PPE_UNIPHY0_SYS_RST + index]); + if (err) + return err; + } + + /* Assert uniphy port reset control */ + switch (ppe_type) { + case PPE_TYPE_APPE: + if (index == 0) { + for (port = PPE_PORT1; port <= PPE_PORT4; port++) { + if (!IS_ERR(reset[PPE_UNIPHY_PORT1_DIS + port - 1])) { + err = reset_control_assert(reset[PPE_UNIPHY_PORT1_DIS + + port - 1]); + if (err) + return err; + } + } + } else { + if (!IS_ERR(reset[PPE_UNIPHY0_SOFT_RST + index])) { + err = reset_control_assert(reset[PPE_UNIPHY0_SOFT_RST + index]); + if (err) + return err; + } + } + break; + case PPE_TYPE_MPPE: + if (!IS_ERR(reset[PPE_UNIPHY_PORT1_RX_RST + (index << 1)])) { + err = reset_control_assert(reset[PPE_UNIPHY_PORT1_RX_RST + (index << 1)]); + if (err) + return err; + } + + if (!IS_ERR(reset[PPE_UNIPHY_PORT1_TX_RST + (index << 1)])) { + err = reset_control_assert(reset[PPE_UNIPHY_PORT1_TX_RST + (index << 1)]); + if (err) + return err; + } + break; + default: + break; + } + fsleep(100000); + + /* Deassert uniphy sys reset control */ + if (!IS_ERR(reset[PPE_UNIPHY0_SYS_RST + index])) { + err = reset_control_deassert(reset[PPE_UNIPHY0_SYS_RST + index]); + if (err) + return err; + } + + /* Deassert uniphy port reset control */ + switch (ppe_type) { + case PPE_TYPE_APPE: + if (index == 0) { + for (port = PPE_PORT1; port <= PPE_PORT4; port++) { + if (!IS_ERR(reset[PPE_UNIPHY_PORT1_DIS + port - 1])) { + err = reset_control_deassert(reset[PPE_UNIPHY_PORT1_DIS + + port - 1]); + if (err) + return err; + } + } + } else { + if (!IS_ERR(reset[PPE_UNIPHY0_SOFT_RST + index])) { + err = reset_control_deassert(reset[PPE_UNIPHY0_SOFT_RST + index]); + if (err) + return err; + } + } + break; + case PPE_TYPE_MPPE: + if (!IS_ERR(reset[PPE_UNIPHY_PORT1_RX_RST + (index << 1)])) { + err = reset_control_deassert(reset[PPE_UNIPHY_PORT1_RX_RST + (index << 1)]); + if (err) + return err; + } + + if (!IS_ERR(reset[PPE_UNIPHY_PORT1_TX_RST + (index << 1)])) { + err = reset_control_deassert(reset[PPE_UNIPHY_PORT1_TX_RST + (index << 1)]); + if (err) + return err; + } + break; + default: + break; + } + fsleep(100000); + + return err; +} + +int ppe_uniphy_autoneg_complete_check(struct ppe_uniphy *uniphy, int port) +{ + u32 reg, val; + int channel, ret; + + if (uniphy->interface == PHY_INTERFACE_MODE_USXGMII || + uniphy->interface == PHY_INTERFACE_MODE_QUSGMII) { + /* Only uniphy0 may have multi channels */ + channel = (uniphy->index == 0) ? (port - 1) : 0; + reg = (channel == 0) ? VR_MII_AN_INTR_STS_ADDR : + VR_MII_AN_INTR_STS_CHANNEL_ADDR(channel); + + /* Wait auto negotiation complete */ + ret = read_poll_timeout(ppe_uniphy_read, val, + (val & CL37_ANCMPLT_INTR), + 1000, 100000, true, + uniphy, reg); + if (ret) { + dev_err(uniphy->ppe_dev->dev, + "uniphy %d auto negotiation timeout\n", uniphy->index); + return ret; + } + + /* Clear auto negotiation complete interrupt */ + ppe_uniphy_mask(uniphy, reg, CL37_ANCMPLT_INTR, 0); + } + + return 0; +} + +int ppe_uniphy_speed_set(struct ppe_uniphy *uniphy, int port, int speed) +{ + u32 reg, val; + int channel; + + if (uniphy->interface == PHY_INTERFACE_MODE_USXGMII || + uniphy->interface == PHY_INTERFACE_MODE_QUSGMII) { + /* Only uniphy0 may have multiple channels */ + channel = (uniphy->index == 0) ? (port - 1) : 0; + + reg = (channel == 0) ? SR_MII_CTRL_ADDR : + SR_MII_CTRL_CHANNEL_ADDR(channel); + + switch (speed) { + case SPEED_100: + val = USXGMII_SPEED_100; + break; + case SPEED_1000: + val = USXGMII_SPEED_1000; + break; + case SPEED_2500: + val = USXGMII_SPEED_2500; + break; + case SPEED_5000: + val = USXGMII_SPEED_5000; + break; + case SPEED_10000: + val = USXGMII_SPEED_10000; + break; + case SPEED_10: + val = USXGMII_SPEED_10; + break; + default: + val = 0; + break; + } + + ppe_uniphy_mask(uniphy, reg, USXGMII_SPEED_MASK, val); + } + + return 0; +} + +int ppe_uniphy_duplex_set(struct ppe_uniphy *uniphy, int port, int duplex) +{ + u32 reg; + int channel; + + if (uniphy->interface == PHY_INTERFACE_MODE_USXGMII && + uniphy->interface == PHY_INTERFACE_MODE_QUSGMII) { + /* Only uniphy0 may have multiple channels */ + channel = (uniphy->index == 0) ? (port - 1) : 0; + + reg = (channel == 0) ? SR_MII_CTRL_ADDR : + SR_MII_CTRL_CHANNEL_ADDR(channel); + + ppe_uniphy_mask(uniphy, reg, USXGMII_DUPLEX_FULL, + (duplex == DUPLEX_FULL) ? USXGMII_DUPLEX_FULL : 0); + } + + return 0; +} + +int ppe_uniphy_adapter_reset(struct ppe_uniphy *uniphy, int port) +{ + int channel; + + /* Only uniphy0 may have multiple channels */ + channel = (uniphy->index == 0) ? (port - 1) : 0; + + switch (uniphy->interface) { + case PHY_INTERFACE_MODE_USXGMII: + case PHY_INTERFACE_MODE_QUSGMII: + if (channel == 0) + ppe_uniphy_mask(uniphy, + VR_XS_PCS_DIG_CTRL1_ADDR, + USRA_RST, USRA_RST); + else + ppe_uniphy_mask(uniphy, + VR_MII_DIG_CTRL1_CHANNEL_ADDR(channel), + CHANNEL_USRA_RST, CHANNEL_USRA_RST); + break; + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_1000BASEX: + case PHY_INTERFACE_MODE_2500BASEX: + case PHY_INTERFACE_MODE_QSGMII: + ppe_uniphy_mask(uniphy, + UNIPHY_CHANNEL_INPUT_OUTPUT_4_ADDR(channel), + NEWADDEDFROMHERE_CH_ADP_SW_RSTN, 0); + ppe_uniphy_mask(uniphy, + UNIPHY_CHANNEL_INPUT_OUTPUT_4_ADDR(channel), + NEWADDEDFROMHERE_CH_ADP_SW_RSTN, + NEWADDEDFROMHERE_CH_ADP_SW_RSTN); + break; + default: + break; + } + + return 0; +} + +static int ppe_pcs_config(struct phylink_pcs *pcs, unsigned int mode, + phy_interface_t interface, + const unsigned long *advertising, + bool permit_pause_to_mac) +{ + struct ppe_uniphy *uniphy = pcs_to_ppe_uniphy(pcs); + unsigned long rate = 0; + int ret, channel = 0; + u32 val = 0; + + if (uniphy->interface == interface) + return 0; + + uniphy->interface = interface; + + /* Disable gcc uniphy interface clock */ + ppe_uniphy_interface_gcc_clock_en_set(uniphy, false); + + /* Assert gcc uniphy xpcs reset control */ + ppe_uniphy_gcc_xpcs_reset(uniphy, true); + + /* Configure uniphy mode */ + switch (interface) { + case PHY_INTERFACE_MODE_USXGMII: + case PHY_INTERFACE_MODE_10GBASER: + case PHY_INTERFACE_MODE_QUSGMII: + rate = UNIPHY_CLK_RATE_312P5M; + ppe_uniphy_mask(uniphy, UNIPHY_MODE_CTRL_ADDR, + USXGMII_MODE_CTRL_MASK, USXGMII_MODE_CTRL); + break; + case PHY_INTERFACE_MODE_2500BASEX: + rate = UNIPHY_CLK_RATE_312P5M; + ppe_uniphy_mask(uniphy, UNIPHY_MODE_CTRL_ADDR, + SGMIIPLUS_MODE_CTRL_MASK, SGMIIPLUS_MODE_CTRL); + break; + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_1000BASEX: + rate = UNIPHY_CLK_RATE_125M; + ppe_uniphy_mask(uniphy, UNIPHY_MODE_CTRL_ADDR, + SGMII_MODE_CTRL_MASK, SGMII_MODE_CTRL); + break; + case PHY_INTERFACE_MODE_QSGMII: + rate = UNIPHY_CLK_RATE_125M; + ppe_uniphy_mask(uniphy, UNIPHY_MODE_CTRL_ADDR, + QSGMII_MODE_CTRL_MASK, QSGMII_MODE_CTRL); + break; + default: + break; + } + + if (interface == PHY_INTERFACE_MODE_QUSGMII) + ppe_uniphy_mask(uniphy, UNIPHY_QP_USXG_OPITON1_ADDR, + GMII_SRC_SEL, GMII_SRC_SEL); + + if (interface == PHY_INTERFACE_MODE_10GBASER) + ppe_uniphy_mask(uniphy, UNIPHY_LINK_DETECT_ADDR, + DETECT_LOS_FROM_SFP, UNIPHY_10GR_LINK_LOSS); + + /* Reset uniphy gcc software reset control */ + ppe_uniphy_gcc_software_reset(uniphy); + + /* Wait uniphy calibration completion */ + ret = read_poll_timeout(ppe_uniphy_read, val, + (val & MMD1_REG_CALIBRATION_DONE_REG), + 1000, 100000, true, + uniphy, UNIPHY_OFFSET_CALIB_4_ADDR); + if (ret) { + dev_err(uniphy->ppe_dev->dev, + "uniphy %d calibration timeout\n", uniphy->index); + return ret; + } + + /* Enable gcc uniphy interface clk */ + ppe_uniphy_interface_gcc_clock_en_set(uniphy, true); + + /* Deassert gcc uniphy xpcs reset control */ + if (interface == PHY_INTERFACE_MODE_USXGMII || + interface == PHY_INTERFACE_MODE_10GBASER || + interface == PHY_INTERFACE_MODE_QUSGMII) + ppe_uniphy_gcc_xpcs_reset(uniphy, false); + + if (interface == PHY_INTERFACE_MODE_USXGMII || + interface == PHY_INTERFACE_MODE_QUSGMII) { + /* Wait 10gr link up */ + ret = read_poll_timeout(ppe_uniphy_read, val, + (val & SR_XS_PCS_KR_STS1_PLU), + 1000, 100000, true, + uniphy, SR_XS_PCS_KR_STS1_ADDR); + if (ret) + dev_warn(uniphy->ppe_dev->dev, + "uniphy %d 10gr linkup timeout\n", uniphy->index); + + /* Enable usxgmii */ + ppe_uniphy_mask(uniphy, VR_XS_PCS_DIG_CTRL1_ADDR, USXGMII_EN, USXGMII_EN); + + if (interface == PHY_INTERFACE_MODE_QUSGMII) { + /* XPCS set quxgmii mode */ + ppe_uniphy_mask(uniphy, VR_XS_PCS_DIG_STS_ADDR, AM_COUNT, QUXGMII_AM_COUNT); + ppe_uniphy_mask(uniphy, VR_XS_PCS_KR_CTRL_ADDR, USXG_MODE, QUXGMII_MODE); + /* XPCS software reset */ + ppe_uniphy_mask(uniphy, VR_XS_PCS_DIG_CTRL1_ADDR, VR_RST, VR_RST); + } + + /* Enable autoneg complete interrupt and 10M/100M 8bit mii width */ + ppe_uniphy_mask(uniphy, VR_MII_AN_CTRL_ADDR, + MII_AN_INTR_EN | MII_CTRL, MII_AN_INTR_EN | MII_CTRL); + + if (interface == PHY_INTERFACE_MODE_QUSGMII) { + for (channel = 1; channel <= 3; channel++) + ppe_uniphy_mask(uniphy, VR_MII_AN_CTRL_CHANNEL_ADDR(channel), + MII_AN_INTR_EN | MII_CTRL, + MII_AN_INTR_EN | MII_CTRL); + /* Disable TICD */ + ppe_uniphy_mask(uniphy, VR_XAUI_MODE_CTRL_ADDR, IPG_CHECK, IPG_CHECK); + for (channel = 1; channel <= 3; channel++) + ppe_uniphy_mask(uniphy, VR_XAUI_MODE_CTRL_CHANNEL_ADDR(channel), + IPG_CHECK, IPG_CHECK); + } + + /* Enable autoneg ability and usxgmii 10g speed and full duplex */ + ppe_uniphy_mask(uniphy, SR_MII_CTRL_ADDR, + USXGMII_SPEED_MASK | AN_ENABLE | USXGMII_DUPLEX_FULL, + USXGMII_SPEED_10000 | AN_ENABLE | USXGMII_DUPLEX_FULL); + if (interface == PHY_INTERFACE_MODE_QUSGMII) { + for (channel = 1; channel <= 3; channel++) + ppe_uniphy_mask(uniphy, SR_MII_CTRL_CHANNEL_ADDR(channel), + USXGMII_SPEED_MASK | AN_ENABLE | + USXGMII_DUPLEX_FULL, + USXGMII_SPEED_10000 | AN_ENABLE | + USXGMII_DUPLEX_FULL); + + /* Enable eee transparent mode */ + ppe_uniphy_mask(uniphy, VR_XS_PCS_EEE_MCTRL0_ADDR, + MULT_FACT_100NS | SIGN_BIT, + FIELD_PREP(MULT_FACT_100NS, 0x1) | SIGN_BIT); + ppe_uniphy_mask(uniphy, VR_XS_PCS_EEE_TXTIMER_ADDR, + TSL_RES | T1U_RES | TWL_RES, + UNIPHY_XPCS_TSL_TIMER | + UNIPHY_XPCS_T1U_TIMER | UNIPHY_XPCS_TWL_TIMER); + ppe_uniphy_mask(uniphy, VR_XS_PCS_EEE_RXTIMER_ADDR, + RES_100U | TWR_RES, + UNIPHY_XPCS_100US_TIMER | UNIPHY_XPCS_TWR_TIMER); + + ppe_uniphy_mask(uniphy, VR_XS_PCS_EEE_MCTRL1_ADDR, + TRN_LPI | TRN_RXLPI, TRN_LPI | TRN_RXLPI); + ppe_uniphy_mask(uniphy, VR_XS_PCS_EEE_MCTRL0_ADDR, + LTX_EN | LRX_EN, LTX_EN | LRX_EN); + } + } + + /* Set uniphy raw clk rate */ + clk_set_rate(uniphy_raw_clks[(uniphy->index << 1) + UNIPHY_RX]->clk, + rate); + clk_set_rate(uniphy_raw_clks[(uniphy->index << 1) + UNIPHY_TX]->clk, + rate); + + dev_info(uniphy->ppe_dev->dev, + "ppe pcs config uniphy index %d, interface %s\n", + uniphy->index, phy_modes(interface)); + + return 0; +} + +static void ppe_pcs_get_state(struct phylink_pcs *pcs, + struct phylink_link_state *state) +{ + struct ppe_uniphy *uniphy = pcs_to_ppe_uniphy(pcs); + u32 val; + + switch (state->interface) { + case PHY_INTERFACE_MODE_10GBASER: + val = ppe_uniphy_read(uniphy, SR_XS_PCS_KR_STS1_ADDR); + state->link = (val & SR_XS_PCS_KR_STS1_PLU) ? 1 : 0; + state->duplex = DUPLEX_FULL; + state->speed = SPEED_10000; + state->pause |= (MLO_PAUSE_RX | MLO_PAUSE_TX); + break; + case PHY_INTERFACE_MODE_2500BASEX: + val = ppe_uniphy_read(uniphy, UNIPHY_CHANNEL0_INPUT_OUTPUT_6_ADDR); + state->link = (val & NEWADDEDFROMHERE_CH0_LINK_MAC) ? 1 : 0; + state->duplex = DUPLEX_FULL; + state->speed = SPEED_2500; + state->pause |= (MLO_PAUSE_RX | MLO_PAUSE_TX); + break; + case PHY_INTERFACE_MODE_1000BASEX: + case PHY_INTERFACE_MODE_SGMII: + val = ppe_uniphy_read(uniphy, UNIPHY_CHANNEL0_INPUT_OUTPUT_6_ADDR); + state->link = (val & NEWADDEDFROMHERE_CH0_LINK_MAC) ? 1 : 0; + state->duplex = (val & NEWADDEDFROMHERE_CH0_DUPLEX_MODE_MAC) ? + DUPLEX_FULL : DUPLEX_HALF; + if (FIELD_GET(NEWADDEDFROMHERE_CH0_SPEED_MODE_MAC, val) == UNIPHY_SPEED_10M) + state->speed = SPEED_10; + else if (FIELD_GET(NEWADDEDFROMHERE_CH0_SPEED_MODE_MAC, val) == UNIPHY_SPEED_100M) + state->speed = SPEED_100; + else if (FIELD_GET(NEWADDEDFROMHERE_CH0_SPEED_MODE_MAC, val) == UNIPHY_SPEED_1000M) + state->speed = SPEED_1000; + state->pause |= (MLO_PAUSE_RX | MLO_PAUSE_TX); + break; + default: + break; + } +} + +static void ppe_pcs_an_restart(struct phylink_pcs *pcs) +{ +} + +static const struct phylink_pcs_ops ppe_pcs_ops = { + .pcs_get_state = ppe_pcs_get_state, + .pcs_config = ppe_pcs_config, + .pcs_an_restart = ppe_pcs_an_restart, +}; + +static void uniphy_clk_release_provider(void *res) +{ + of_clk_del_provider(res); +} + +struct ppe_uniphy *ppe_uniphy_setup(struct platform_device *pdev) +{ + struct clk_hw_onecell_data *uniphy_clk_data = NULL; + struct device_node *np; + struct ppe_device *ppe_dev = platform_get_drvdata(pdev); + struct ppe_uniphy *uniphy; + int i, ret, clk_num = 0; + + np = of_get_child_by_name(pdev->dev.of_node, "qcom-uniphy"); + if (!np) { + dev_err(&pdev->dev, "Failed to find uniphy node\n"); + return ERR_PTR(-ENODEV); + } + + /* Register uniphy raw clock */ + clk_num = of_property_count_strings(np, "clock-output-names"); + if (clk_num < 0) { + dev_err(&pdev->dev, "%pOFn: invalid clock output count\n", np); + goto err_node_put; + } + + uniphy_clk_data = devm_kzalloc(&pdev->dev, + struct_size(uniphy_clk_data, hws, clk_num), + GFP_KERNEL); + if (!uniphy_clk_data) { + ret = -ENOMEM; + goto err_node_put; + } + + uniphy_clk_data->num = clk_num; + for (i = 0; i < clk_num; i++) { + ret = of_property_read_string_index(np, "clock-output-names", i, + (const char **)&uniphy_raw_clks[i]->init->name); + if (ret) { + dev_err(&pdev->dev, "invalid clock name @ %pOFn\n", np); + goto err_node_put; + } + + ret = devm_clk_hw_register(&pdev->dev, uniphy_raw_clks[i]); + if (ret) + goto err_node_put; + uniphy_clk_data->hws[i] = uniphy_raw_clks[i]; + } + + ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, uniphy_clk_data); + if (ret) + goto err_node_put; + + ret = devm_add_action_or_reset(&pdev->dev, uniphy_clk_release_provider, np); + if (ret) + goto err_node_put; + + /* Initialize each uniphy structure */ + uniphy = devm_kzalloc(&pdev->dev, sizeof(*uniphy) * (clk_num >> 1), GFP_KERNEL); + if (!uniphy) { + ret = -ENOMEM; + goto err_node_put; + } + + for (i = 0; i < (clk_num >> 1); i++) { + uniphy[i].base = devm_of_iomap(&pdev->dev, np, i, NULL); + if (IS_ERR(uniphy[i].base)) { + ret = PTR_ERR(uniphy[i].base); + goto err_node_put; + } + uniphy[i].index = i; + uniphy[i].interface = PHY_INTERFACE_MODE_NA; + uniphy[i].ppe_dev = ppe_dev; + uniphy[i].pcs.ops = &ppe_pcs_ops; + uniphy[i].pcs.poll = true; + } + of_node_put(np); + return uniphy; + +err_node_put: + of_node_put(np); + return ERR_PTR(ret); +} diff --git a/drivers/net/ethernet/qualcomm/ppe/ppe_uniphy.h b/drivers/net/ethernet/qualcomm/ppe/ppe_uniphy.h new file mode 100644 index 000000000000..ec547e520937 --- /dev/null +++ b/drivers/net/ethernet/qualcomm/ppe/ppe_uniphy.h @@ -0,0 +1,227 @@ +/* SPDX-License-Identifier: GPL-2.0-only + * + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/* PPE UNIPHY functions and UNIPHY hardware registers declarations. */ + +#ifndef _PPE_UNIPHY_H_ +#define _PPE_UNIPHY_H_ + +#include + +#define UNIPHY_INDIRECT_ADDR_START 0x8000 +#define UNIPHY_INDIRECT_AHB_ADDR 0x83fc +#define UNIPHY_INDIRECT_ADDR_HIGH GENMASK(20, 8) +#define UNIPHY_INDIRECT_ADDR_LOW GENMASK(7, 0) +#define UNIPHY_INDIRECT_DATA_ADDR(reg) (FIELD_PREP(GENMASK(15, 10), 0x20) | \ + FIELD_PREP(GENMASK(9, 2), \ + FIELD_GET(UNIPHY_INDIRECT_ADDR_LOW, reg))) + +/* [register] UNIPHY_MISC2 */ +#define UNIPHY_MISC2_ADDR 0x218 +#define PHY_MODE GENMASK(6, 4) +#define USXGMII_PHY_MODE (FIELD_PREP(PHY_MODE, 0x7)) +#define SGMII_PLUS_PHY_MODE (FIELD_PREP(PHY_MODE, 0x5)) +#define SGMII_PHY_MODE (FIELD_PREP(PHY_MODE, 0x3)) + +/* [register] UNIPHY_MODE_CTRL */ +#define UNIPHY_MODE_CTRL_ADDR 0x46c +#define NEWADDEDFROMHERE_CH0_AUTONEG_MODE BIT(0) +#define NEWADDEDFROMHERE_CH1_CH0_SGMII BIT(1) +#define NEWADDEDFROMHERE_CH4_CH1_0_SGMII BIT(2) +#define NEWADDEDFROMHERE_SGMII_EVEN_LOW BIT(3) +#define NEWADDEDFROMHERE_CH0_MODE_CTRL_25M GENMASK(6, 4) +#define NEWADDEDFROMHERE_CH0_QSGMII_SGMII BIT(8) +#define NEWADDEDFROMHERE_CH0_PSGMII_QSGMII BIT(9) +#define NEWADDEDFROMHERE_SG_MODE BIT(10) +#define NEWADDEDFROMHERE_SGPLUS_MODE BIT(11) +#define NEWADDEDFROMHERE_XPCS_MODE BIT(12) +#define NEWADDEDFROMHERE_USXG_EN BIT(13) +#define NEWADDEDFROMHERE_SW_V17_V18 BIT(15) +#define USXGMII_MODE_CTRL_MASK GENMASK(12, 8) +#define USXGMII_MODE_CTRL NEWADDEDFROMHERE_XPCS_MODE +#define TEN_GR_MODE_CTRL_MASK GENMASK(12, 8) +#define TEN_GR_MODE_CTRL NEWADDEDFROMHERE_XPCS_MODE +#define QUSGMII_MODE_CTRL_MASK GENMASK(12, 8) +#define QUSGMII_MODE_CTRL NEWADDEDFROMHERE_XPCS_MODE +#define SGMIIPLUS_MODE_CTRL_MASK (NEWADDEDFROMHERE_CH0_AUTONEG_MODE | \ + GENMASK(12, 8)) +#define SGMIIPLUS_MODE_CTRL NEWADDEDFROMHERE_SGPLUS_MODE +#define QSGMII_MODE_CTRL_MASK (NEWADDEDFROMHERE_CH0_AUTONEG_MODE | \ + GENMASK(12, 8)) +#define QSGMII_MODE_CTRL NEWADDEDFROMHERE_CH0_PSGMII_QSGMII +#define SGMII_MODE_CTRL_MASK (NEWADDEDFROMHERE_CH0_AUTONEG_MODE | \ + GENMASK(12, 8)) +#define SGMII_MODE_CTRL NEWADDEDFROMHERE_SG_MODE + +/* [register] UNIPHY_CHANNEL_INPUT_OUTPUT_4 */ +#define UNIPHY_CHANNEL0_INPUT_OUTPUT_4_ADDR 0x480 +#define NEWADDEDFROMHERE_CH0_ADP_SW_RSTN BIT(11) +#define UNIPHY_CHANNEL1_INPUT_OUTPUT_4_ADDR 0x498 +#define NEWADDEDFROMHERE_CH1_ADP_SW_RSTN BIT(11) +#define UNIPHY_CHANNEL2_INPUT_OUTPUT_4_ADDR 0x4b0 +#define NEWADDEDFROMHERE_CH2_ADP_SW_RSTN BIT(11) +#define UNIPHY_CHANNEL3_INPUT_OUTPUT_4_ADDR 0x4c8 +#define NEWADDEDFROMHERE_CH3_ADP_SW_RSTN BIT(11) +#define UNIPHY_CHANNEL4_INPUT_OUTPUT_4_ADDR 0x4e0 +#define NEWADDEDFROMHERE_CH4_ADP_SW_RSTN BIT(11) +#define UNIPHY_CHANNEL_INPUT_OUTPUT_4_ADDR(x) (0x480 + 0x18 * (x)) +#define NEWADDEDFROMHERE_CH_ADP_SW_RSTN BIT(11) + +/* [register] UNIPHY_CHANNEL_INPUT_OUTPUT_6 */ +#define UNIPHY_CHANNEL0_INPUT_OUTPUT_6_ADDR 0x488 +#define NEWADDEDFROMHERE_CH0_LINK_MAC BIT(7) +#define NEWADDEDFROMHERE_CH0_DUPLEX_MODE_MAC BIT(6) +#define NEWADDEDFROMHERE_CH0_SPEED_MODE_MAC GENMASK(5, 4) +#define NEWADDEDFROMHERE_CH0_PAUSE_MAC BIT(3) +#define NEWADDEDFROMHERE_CH0_ASYM_PAUSE_MAC BIT(2) +#define NEWADDEDFROMHERE_CH0_TX_PAUSE_EN_MAC BIT(1) +#define NEWADDEDFROMHERE_CH0_RX_PAUSE_EN_MAC BIT(0) +#define UNIPHY_SPEED_10M 0 +#define UNIPHY_SPEED_100M 1 +#define UNIPHY_SPEED_1000M 2 + +/* [register] UNIPHY_INSTANCE_LINK_DETECT */ +#define UNIPHY_LINK_DETECT_ADDR 0x570 +#define DETECT_LOS_FROM_SFP GENMASK(8, 6) +#define UNIPHY_10GR_LINK_LOSS (FIELD_PREP(DETECT_LOS_FROM_SFP, 0x7)) + +/* [register] UNIPHY_QP_USXG_OPITON1 */ +#define UNIPHY_QP_USXG_OPITON1_ADDR 0x584 +#define GMII_SRC_SEL BIT(0) + +/* [register] UNIPHY_OFFSET_CALIB_4 */ +#define UNIPHY_OFFSET_CALIB_4_ADDR 0x1e0 +#define MMD1_REG_CALIBRATION_DONE_REG BIT(7) +#define UNIPHY_CALIBRATION_DONE 0x1 + +/* [register] UNIPHY_PLL_RESET */ +#define UNIPHY_PLL_RESET_ADDR 0x780 +#define UPHY_ANA_EN_SW_RSTN BIT(6) + +/* [register] SR_XS_PCS_KR_STS1 */ +#define SR_XS_PCS_KR_STS1_ADDR 0x30020 +#define SR_XS_PCS_KR_STS1_PLU BIT(12) + +/* [register] VR_XS_PCS_DIG_CTRL1 */ +#define VR_XS_PCS_DIG_CTRL1_ADDR 0x38000 +#define USXGMII_EN BIT(9) +#define USRA_RST BIT(10) +#define VR_RST BIT(15) + +/* [register] VR_XS_PCS_EEE_MCTRL0 */ +#define VR_XS_PCS_EEE_MCTRL0_ADDR 0x38006 +#define LTX_EN BIT(0) +#define LRX_EN BIT(1) +#define SIGN_BIT BIT(6) +#define MULT_FACT_100NS GENMASK(11, 8) + +/* [register] VR_XS_PCS_KR_CTRL */ +#define VR_XS_PCS_KR_CTRL_ADDR 0x38007 +#define USXG_MODE GENMASK(12, 10) +#define QUXGMII_MODE (FIELD_PREP(USXG_MODE, 0x5)) + +/* [register] VR_XS_PCS_EEE_TXTIMER */ +#define VR_XS_PCS_EEE_TXTIMER_ADDR 0x38008 +#define TSL_RES GENMASK(5, 0) +#define T1U_RES GENMASK(7, 6) +#define TWL_RES GENMASK(12, 8) +#define UNIPHY_XPCS_TSL_TIMER (FIELD_PREP(TSL_RES, 0xa)) +#define UNIPHY_XPCS_T1U_TIMER (FIELD_PREP(TSL_RES, 0x3)) +#define UNIPHY_XPCS_TWL_TIMER (FIELD_PREP(TSL_RES, 0x16)) + +/* [register] VR_XS_PCS_EEE_RXTIMER */ +#define VR_XS_PCS_EEE_RXTIMER_ADDR 0x38009 +#define RES_100U GENMASK(7, 0) +#define TWR_RES GENMASK(13, 8) +#define UNIPHY_XPCS_100US_TIMER (FIELD_PREP(RES_100U, 0xc8)) +#define UNIPHY_XPCS_TWR_TIMER (FIELD_PREP(RES_100U, 0x1c)) + +/* [register] VR_XS_PCS_DIG_STS */ +#define VR_XS_PCS_DIG_STS_ADDR 0x3800a +#define AM_COUNT GENMASK(14, 0) +#define QUXGMII_AM_COUNT (FIELD_PREP(AM_COUNT, 0x6018)) + +/* [register] VR_XS_PCS_EEE_MCTRL1 */ +#define VR_XS_PCS_EEE_MCTRL1_ADDR 0x3800b +#define TRN_LPI BIT(0) +#define TRN_RXLPI BIT(8) + +/* [register] VR_MII_1_DIG_CTRL1 */ +#define VR_MII_DIG_CTRL1_CHANNEL1_ADDR 0x1a8000 +#define VR_MII_DIG_CTRL1_CHANNEL2_ADDR 0x1b8000 +#define VR_MII_DIG_CTRL1_CHANNEL3_ADDR 0x1c8000 +#define VR_MII_DIG_CTRL1_CHANNEL_ADDR(x) (0x1a8000 + 0x10000 * ((x) - 1)) +#define CHANNEL_USRA_RST BIT(5) + +/* [register] VR_MII_AN_CTRL */ +#define VR_MII_AN_CTRL_ADDR 0x1f8001 +#define VR_MII_AN_CTRL_CHANNEL1_ADDR 0x1a8001 +#define VR_MII_AN_CTRL_CHANNEL2_ADDR 0x1b8001 +#define VR_MII_AN_CTRL_CHANNEL3_ADDR 0x1c8001 +#define VR_MII_AN_CTRL_CHANNEL_ADDR(x) (0x1a8001 + 0x10000 * ((x) - 1)) +#define MII_AN_INTR_EN BIT(0) +#define MII_CTRL BIT(8) + +/* [register] VR_MII_AN_INTR_STS */ +#define VR_MII_AN_INTR_STS_ADDR 0x1f8002 +#define VR_MII_AN_INTR_STS_CHANNEL1_ADDR 0x1a8002 +#define VR_MII_AN_INTR_STS_CHANNEL2_ADDR 0x1b8002 +#define VR_MII_AN_INTR_STS_CHANNEL3_ADDR 0x1c8002 +#define VR_MII_AN_INTR_STS_CHANNEL_ADDR(x) (0x1a8002 + 0x10000 * ((x) - 1)) +#define CL37_ANCMPLT_INTR BIT(0) + +/* [register] VR_XAUI_MODE_CTRL */ +#define VR_XAUI_MODE_CTRL_ADDR 0x1f8004 +#define VR_XAUI_MODE_CTRL_CHANNEL1_ADDR 0x1a8004 +#define VR_XAUI_MODE_CTRL_CHANNEL2_ADDR 0x1b8004 +#define VR_XAUI_MODE_CTRL_CHANNEL3_ADDR 0x1c8004 +#define VR_XAUI_MODE_CTRL_CHANNEL_ADDR(x) (0x1a8004 + 0x10000 * ((x) - 1)) +#define IPG_CHECK BIT(0) + +/* [register] SR_MII_CTRL */ +#define SR_MII_CTRL_ADDR 0x1f0000 +#define SR_MII_CTRL_CHANNEL1_ADDR 0x1a0000 +#define SR_MII_CTRL_CHANNEL2_ADDR 0x1b0000 +#define SR_MII_CTRL_CHANNEL3_ADDR 0x1c0000 +#define SR_MII_CTRL_CHANNEL_ADDR(x) (0x1a0000 + 0x10000 * ((x) - 1)) +#define AN_ENABLE BIT(12) +#define USXGMII_DUPLEX_FULL BIT(8) +#define USXGMII_SPEED_MASK (BIT(13) | BIT(6) | BIT(5)) +#define USXGMII_SPEED_10000 (BIT(13) | BIT(6)) +#define USXGMII_SPEED_5000 (BIT(13) | BIT(5)) +#define USXGMII_SPEED_2500 BIT(5) +#define USXGMII_SPEED_1000 BIT(6) +#define USXGMII_SPEED_100 BIT(13) +#define USXGMII_SPEED_10 0 + +/* PPE UNIPHY data type */ +struct ppe_uniphy { + void __iomem *base; + struct ppe_device *ppe_dev; + unsigned int index; + phy_interface_t interface; + struct phylink_pcs pcs; +}; + +#define pcs_to_ppe_uniphy(_pcs) container_of(_pcs, struct ppe_uniphy, pcs) + +struct ppe_uniphy *ppe_uniphy_setup(struct platform_device *pdev); + +int ppe_uniphy_speed_set(struct ppe_uniphy *uniphy, + int port, int speed); + +int ppe_uniphy_duplex_set(struct ppe_uniphy *uniphy, + int port, int duplex); + +int ppe_uniphy_adapter_reset(struct ppe_uniphy *uniphy, + int port); + +int ppe_uniphy_autoneg_complete_check(struct ppe_uniphy *uniphy, + int port); + +int ppe_uniphy_port_gcc_clock_en_set(struct ppe_uniphy *uniphy, + int port, bool enable); + +#endif /* _PPE_UNIPHY_H_ */ diff --git a/include/linux/soc/qcom/ppe.h b/include/linux/soc/qcom/ppe.h index 268109c823ad..d3cb18df33fa 100644 --- a/include/linux/soc/qcom/ppe.h +++ b/include/linux/soc/qcom/ppe.h @@ -20,6 +20,7 @@ struct ppe_device { struct dentry *debugfs_root; bool is_ppe_probed; void *ppe_priv; + void *uniphy; }; /* PPE operations, which is used by the external driver like Ethernet