@@ -83,6 +83,9 @@ &mac0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+ nvmem-cells = <ð0_macaddress>;
+ nvmem-cell-names = "mac-address";
};
&i2c1 {
@@ -103,6 +106,12 @@ eeprom@57 {
compatible = "st,24c128", "atmel,24c128";
reg = <0x57>;
pagesize = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth0_macaddress: macaddress@3f80 {
+ reg = <0x3f80 6>;
+ };
};
};
@@ -71,6 +71,9 @@ &mac0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+ nvmem-cells = <ð0_macaddress>;
+ nvmem-cell-names = "mac-address";
};
&i2c0 {
@@ -131,6 +134,12 @@ eeprom@50 {
compatible = "st,24c128", "atmel,24c128";
reg = <0x50>;
pagesize = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth0_macaddress: macaddress@3f80 {
+ reg = <0x3f80 6>;
+ };
};
};
Like the more recently added ASRock BMC platforms, e3c246d4i and romed8hm3 also have the BMC's MAC address available in the baseboard FRU EEPROM, so let's add support for using it. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> --- arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts | 9 +++++++++ arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts | 9 +++++++++ 2 files changed, 18 insertions(+)