diff mbox series

[v4] regulator: dt-bindings: microchip,mcp16502: convert to YAML

Message ID 20240201161517.492162-1-andrei.simion@microchip.com (mailing list archive)
State New, archived
Headers show
Series [v4] regulator: dt-bindings: microchip,mcp16502: convert to YAML | expand

Commit Message

Andrei Simion Feb. 1, 2024, 4:15 p.m. UTC 
Convert devicetree binding mcp16502-regulator.txt to YAML format.

Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes v3 -> v4:
- "additionalProperties: false" placed just after the required list

Changes v2 -> v3:
- keep one line of regulators description
- add additionalProperties: false for regulators
- "description:" at the end for each properties

Changes v1 -> v2:
- reverse subject prefixes
- line break after file "description:"
- drop description for reg
- drop regulator-name
- add regulator-initial-mode
- unevaluatedProperties just after $ref: regulator.yaml#
- additionalProperties  just before "required"
- node names generic in example
- drop reg property from i2c
- use 4 spaces for example indentation
---
 .../bindings/regulator/mcp16502-regulator.txt | 144 --------------
 .../regulator/microchip,mcp16502.yaml         | 180 ++++++++++++++++++
 2 files changed, 180 insertions(+), 144 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml

Comments

Mark Brown Feb. 2, 2024, 4:41 p.m. UTC | #1 
On Thu, 01 Feb 2024 18:15:17 +0200, Andrei Simion wrote:
> Convert devicetree binding mcp16502-regulator.txt to YAML format.
> 
> 

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/1] regulator: dt-bindings: microchip,mcp16502: convert to YAML
      commit: 64db3e8d7be00462ad95dd81f11cf8e3f0968d70

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
deleted file mode 100644
index 451cc4e86b01..000000000000
--- a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
+++ /dev/null
@@ -1,144 +0,0 @@ 
-MCP16502 PMIC
-
-Required properties:
-- compatible: "microchip,mcp16502"
-- reg: I2C slave address
-- lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during
-	     suspend-to-ram, keeping the PMIC into HIBERNATE mode; this
-	     property is optional;
-- regulators: A node that houses a sub-node for each regulator within
-              the device. Each sub-node is identified using the node's
-              name. The content of each sub-node is defined by the
-              standard binding for regulators; see regulator.txt.
-
-Regulators of MCP16502 PMIC:
-1) VDD_IO	- Buck (1.2 - 3.7 V)
-2) VDD_DDR	- Buck (0.6 - 1.85 V)
-3) VDD_CORE	- Buck (0.6 - 1.85 V)
-4) VDD_OTHER	- BUCK (0.6 - 1.85 V)
-5) LDO1		- LDO  (1.2 - 3.7 V)
-6) LDO2		- LDO  (1.2 - 3.7 V)
-
-Regulator modes:
-2 - FPWM: higher precision, higher consumption
-4 - AutoPFM: lower precision, lower consumption
-
-Each regulator is defined using the standard binding for regulators.
-
-Example:
-
-mcp16502@5b {
-	compatible = "microchip,mcp16502";
-	reg = <0x5b>;
-	status = "okay";
-	lpm-gpios = <&pioBU 7 GPIO_ACTIVE_HIGH>;
-
-	regulators {
-		VDD_IO {
-			regulator-name = "VDD_IO";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3700000>;
-			regulator-initial-mode = <2>;
-			regulator-allowed-modes = <2>, <4>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-				regulator-mode = <4>;
-			};
-		};
-
-		VDD_DDR {
-			regulator-name = "VDD_DDR";
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <1850000>;
-			regulator-initial-mode = <2>;
-			regulator-allowed-modes = <2>, <4>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-
-			regulator-state-mem {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-		};
-
-		VDD_CORE {
-			regulator-name = "VDD_CORE";
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <1850000>;
-			regulator-initial-mode = <2>;
-			regulator-allowed-modes = <2>, <4>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-				regulator-mode = <4>;
-			};
-		};
-
-		VDD_OTHER {
-			regulator-name = "VDD_OTHER";
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <1850000>;
-			regulator-initial-mode = <2>;
-			regulator-allowed-modes = <2>, <4>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-				regulator-mode = <4>;
-			};
-		};
-
-		LDO1 {
-			regulator-name = "LDO1";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3700000>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-			};
-		};
-
-		LDO2 {
-			regulator-name = "LDO2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3700000>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-			};
-		};
-
-	};
-};
diff --git a/Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml b/Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml
new file mode 100644
index 000000000000..1aca3646789e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml
@@ -0,0 +1,180 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/microchip,mcp16502.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MCP16502 - High-Performance PMIC
+
+maintainers:
+  - Andrei Simion <andrei.simion@microchip.com>
+
+description:
+  The MCP16502 is an optimally integrated PMIC compatible
+  with Microchip's eMPUs(Embedded Microprocessor Units),
+  requiring Dynamic Voltage Scaling (DVS) with the use
+  of High-Performance mode (HPM).
+
+properties:
+  compatible:
+    const: microchip,mcp16502
+
+  lpm-gpios:
+    maxItems: 1
+    description: GPIO for LPM pin.
+      Note that this GPIO must remain high during
+      suspend-to-ram, keeping the PMIC into HIBERNATE mode.
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    additionalProperties: false
+    description: List of regulators and its properties.
+
+    patternProperties:
+      "^(VDD_(IO|CORE|DDR|OTHER)|LDO[1-2])$":
+        type: object
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          regulator-initial-mode:
+            enum: [2, 4]
+            default: 2
+            description: Initial operating mode
+
+          regulator-allowed-modes:
+            items:
+              enum: [2, 4]
+            description: Supported modes
+              2 - FPWM higher precision, higher consumption
+              4 - AutoPFM lower precision, lower consumption
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@5b {
+            compatible = "microchip,mcp16502";
+            reg = <0x5b>;
+
+            regulators {
+                VDD_IO {
+                    regulator-name = "VDD_IO";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-initial-mode = <2>;
+                    regulator-allowed-modes = <2>, <4>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-mode = <4>;
+                    };
+                };
+
+                VDD_DDR {
+                    regulator-name = "VDD_DDR";
+                    regulator-min-microvolt = <1350000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-initial-mode = <2>;
+                    regulator-allowed-modes = <2>, <4>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+                };
+
+                VDD_CORE {
+                    regulator-name = "VDD_CORE";
+                    regulator-min-microvolt = <1150000>;
+                    regulator-max-microvolt = <1150000>;
+                    regulator-initial-mode = <2>;
+                    regulator-allowed-modes = <2>, <4>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-mode = <4>;
+                    };
+                };
+
+                VDD_OTHER {
+                    regulator-name = "VDD_OTHER";
+                    regulator-min-microvolt = <1050000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-initial-mode = <2>;
+                    regulator-allowed-modes = <2>, <4>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-mode = <4>;
+                    };
+                };
+
+                LDO1 {
+                    regulator-name = "LDO1";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                LDO2 {
+                    regulator-name = "LDO2";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3700000>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+            };
+        };
+    };