diff mbox series

[v2,1/2] arm64: dts: freescale: imx8-ss-dma: Fix edma3's location

Message ID 20240206080459.1741172-1-alexander.stein@ew.tq-group.com (mailing list archive)
State New, archived
Headers show
Series [v2,1/2] arm64: dts: freescale: imx8-ss-dma: Fix edma3's location | expand

Commit Message

Alexander Stein Feb. 6, 2024, 8:04 a.m. UTC 
Sort nodes by base address. edma3 comes later in the memory map.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 46 +++++++++----------
 1 file changed, 23 insertions(+), 23 deletions(-)

Comments

Shawn Guo Feb. 23, 2024, 4 a.m. UTC | #1 
On Tue, Feb 06, 2024 at 09:04:58AM +0100, Alexander Stein wrote:
> Sort nodes by base address. edma3 comes later in the memory map.
> 
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>

Applied both, thanks!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index b0bb77150adcc..a180893ac81e0 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -192,29 +192,6 @@  edma2: dma-controller@5a1f0000 {
 				<&pd IMX_SC_R_DMA_2_CH15>;
 	};
 
-	edma3: dma-controller@5a9f0000 {
-		compatible = "fsl,imx8qm-edma";
-		reg = <0x5a9f0000 0x90000>;
-		#dma-cells = <3>;
-		dma-channels = <8>;
-		interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
-				<&pd IMX_SC_R_DMA_3_CH1>,
-				<&pd IMX_SC_R_DMA_3_CH2>,
-				<&pd IMX_SC_R_DMA_3_CH3>,
-				<&pd IMX_SC_R_DMA_3_CH4>,
-				<&pd IMX_SC_R_DMA_3_CH5>,
-				<&pd IMX_SC_R_DMA_3_CH6>,
-				<&pd IMX_SC_R_DMA_3_CH7>;
-	};
-
 	spi0_lpcg: clock-controller@5a400000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5a400000 0x10000>;
@@ -460,6 +437,29 @@  flexcan3: can@5a8f0000 {
 		status = "disabled";
 	};
 
+	edma3: dma-controller@5a9f0000 {
+		compatible = "fsl,imx8qm-edma";
+		reg = <0x5a9f0000 0x90000>;
+		#dma-cells = <3>;
+		dma-channels = <8>;
+		interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
+				<&pd IMX_SC_R_DMA_3_CH1>,
+				<&pd IMX_SC_R_DMA_3_CH2>,
+				<&pd IMX_SC_R_DMA_3_CH3>,
+				<&pd IMX_SC_R_DMA_3_CH4>,
+				<&pd IMX_SC_R_DMA_3_CH5>,
+				<&pd IMX_SC_R_DMA_3_CH6>,
+				<&pd IMX_SC_R_DMA_3_CH7>;
+	};
+
 	i2c0_lpcg: clock-controller@5ac00000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5ac00000 0x10000>;