| Message ID | 20240208212422.213693-2-romain.naour@smile.fr (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] arm64: dts: ti: k3-am69-sk: fix PMIC interrupt number | expand |
Hello, Le 08/02/2024 à 22:24, Romain Naour a écrit : > The tps659413 node set WKUP_GPIO0_7 (G28) pin as input to be used as > PMIC interrupt but uses 9 (WKUP_GPIO0_9) as "interrupts" property. > > Replace 9 by 7 after checking in the board schematic [1]. > > [1] https://www.ti.com/tool/SK-TDA4VM > > Fixes: b808cef0be46 ("arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs") > Cc: Neha Malcom Francis <n-francis@ti.com> > Signed-off-by: Romain Naour <romain.naour@smile.fr> > --- > arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts > index 188dfe291a32..6a8866055f77 100644 > --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts > +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts > @@ -574,7 +574,7 @@ tps659413: pmic@48 { > pinctrl-names = "default"; > pinctrl-0 = <&pmic_irq_pins_default>; > interrupt-parent = <&wkup_gpio0>; > - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; > + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; We need to do this change for both tps659413 and tps659411 nodes for the k3-j721e-sk board. There is only one PMIC on k3-am69-sk. I'll send a v2. Best regards, Romain > gpio-controller; > #gpio-cells = <2>; > ti,primary-pmic;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index 188dfe291a32..6a8866055f77 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -574,7 +574,7 @@ tps659413: pmic@48 { pinctrl-names = "default"; pinctrl-0 = <&pmic_irq_pins_default>; interrupt-parent = <&wkup_gpio0>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; gpio-controller; #gpio-cells = <2>; ti,primary-pmic;
The tps659413 node set WKUP_GPIO0_7 (G28) pin as input to be used as PMIC interrupt but uses 9 (WKUP_GPIO0_9) as "interrupts" property. Replace 9 by 7 after checking in the board schematic [1]. [1] https://www.ti.com/tool/SK-TDA4VM Fixes: b808cef0be46 ("arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs") Cc: Neha Malcom Francis <n-francis@ti.com> Signed-off-by: Romain Naour <romain.naour@smile.fr> --- arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)