| Message ID | 20240211-gemini-dts-v1-3-6c09adeb4c2e@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: gemini: Fix some minor DTS issues | expand |
diff --git a/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts index 30c931415680..b4dbcf8f168e 100644 --- a/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts +++ b/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts @@ -27,10 +27,10 @@ chosen { gpio_keys { compatible = "gpio-keys"; - button-esc { + button-reset { debounce-interval = <100>; wakeup-source; - linux,code = <KEY_ESC>; + linux,code = <KEY_RESTART>; label = "reset"; /* Collides with LPC_LAD[0], UART DCD, SSP 97RST */ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts index 138c47e1ac1b..8c54d3a5a721 100644 --- a/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts +++ b/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts @@ -33,10 +33,10 @@ chosen { gpio_keys { compatible = "gpio-keys"; - button-esc { + button-reset { debounce-interval = <100>; wakeup-source; - linux,code = <KEY_ESC>; + linux,code = <KEY_RESTART>; label = "reset"; gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/gemini/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini/gemini-sl93512r.dts index 91c19e8ebfe8..be06a3815e3a 100644 --- a/arch/arm/boot/dts/gemini/gemini-sl93512r.dts +++ b/arch/arm/boot/dts/gemini/gemini-sl93512r.dts @@ -43,7 +43,7 @@ button-wps { button-setup { debounce-interval = <50>; wakeup-source; - linux,code = <KEY_SETUP>; + linux,code = <KEY_RESTART>; label = "factory reset"; /* Conflict with NAND flash */ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/gemini/gemini-sq201.dts b/arch/arm/boot/dts/gemini/gemini-sq201.dts index d0efd76695da..05ef8b80f104 100644 --- a/arch/arm/boot/dts/gemini/gemini-sq201.dts +++ b/arch/arm/boot/dts/gemini/gemini-sq201.dts @@ -30,7 +30,7 @@ gpio_keys { button-setup { debounce-interval = <100>; wakeup-source; - linux,code = <KEY_SETUP>; + linux,code = <KEY_RESTART>; label = "factory reset"; /* Conflict with NAND flash */ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/gemini/gemini-wbd111.dts b/arch/arm/boot/dts/gemini/gemini-wbd111.dts index d4038930c70f..6a0c89e0c918 100644 --- a/arch/arm/boot/dts/gemini/gemini-wbd111.dts +++ b/arch/arm/boot/dts/gemini/gemini-wbd111.dts @@ -28,10 +28,10 @@ chosen { gpio_keys { compatible = "gpio-keys"; - button-setup { + button-reset { debounce-interval = <100>; wakeup-source; - linux,code = <KEY_SETUP>; + linux,code = <KEY_RESTART>; label = "reset"; /* Conflict with ICE */ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/gemini/gemini-wbd222.dts b/arch/arm/boot/dts/gemini/gemini-wbd222.dts index a503bcff5f4a..d8b34ebad4b0 100644 --- a/arch/arm/boot/dts/gemini/gemini-wbd222.dts +++ b/arch/arm/boot/dts/gemini/gemini-wbd222.dts @@ -27,10 +27,10 @@ chosen { gpio_keys { compatible = "gpio-keys"; - button-setup { + button-reset { debounce-interval = <100>; wakeup-source; - linux,code = <KEY_SETUP>; + linux,code = <KEY_RESTART>; label = "reset"; /* Conflict with ICE */ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
This maps the misc "reset", "setup" and "facory reset" keys to the only key a standard userspace is likely to understand: KEY_RESTART. On OpenWrt this will simply restart the system under controlled forms. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts | 4 ++-- arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts | 4 ++-- arch/arm/boot/dts/gemini/gemini-sl93512r.dts | 2 +- arch/arm/boot/dts/gemini/gemini-sq201.dts | 2 +- arch/arm/boot/dts/gemini/gemini-wbd111.dts | 4 ++-- arch/arm/boot/dts/gemini/gemini-wbd222.dts | 4 ++-- 6 files changed, 10 insertions(+), 10 deletions(-)