@@ -559,9 +559,9 @@ sdhci0: mmc@fa10000 {
clock-names = "clk_ahb", "clk_xin";
assigned-clocks = <&k3_clks 57 6>;
assigned-clock-parents = <&k3_clks 57 8>;
+ bus-width = <8>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
- bus-width = <8>;
ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-mmc-hs = <0x0>;
@@ -579,6 +579,7 @@ sdhci1: mmc@fa00000 {
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
clock-names = "clk_ahb", "clk_xin";
+ bus-width = <4>;
ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x8>;
ti,otap-del-sel-sd-hs = <0x0>;
@@ -591,7 +592,6 @@ sdhci1: mmc@fa00000 {
ti,itap-del-sel-sd-hs = <0x1>;
ti,itap-del-sel-sdr12 = <0xa>;
ti,itap-del-sel-sdr25 = <0x1>;
- bus-width = <4>;
status = "disabled";
};
@@ -602,6 +602,7 @@ sdhci2: mmc@fa20000 {
power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
clock-names = "clk_ahb", "clk_xin";
+ bus-width = <4>;
ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x8>;
ti,otap-del-sel-sd-hs = <0x0>;
@@ -842,7 +842,6 @@ &sdhci2 {
vmmc-supply = <&wlan_en>;
pinctrl-names = "default";
pinctrl-0 = <&wifi_pins_default>, <&wifi_32k_clk>;
- bus-width = <4>;
non-removable;
ti,fails-without-test-cd;
cap-power-off-card;
@@ -561,6 +561,7 @@ sdhci1: mmc@fa00000 {
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
clock-names = "clk_ahb", "clk_xin";
+ bus-width = <4>;
ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
@@ -573,7 +574,6 @@ sdhci1: mmc@fa00000 {
ti,itap-del-sel-sd-hs = <0x0>;
ti,itap-del-sel-sdr12 = <0x0>;
ti,itap-del-sel-sdr25 = <0x0>;
- bus-width = <4>;
no-1-8-v;
status = "disabled";
};
@@ -626,6 +626,7 @@ sdhci0: mmc@fa10000 {
power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 57 0>, <&k3_clks 57 1>;
clock-names = "clk_ahb", "clk_xin";
+ bus-width = <8>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
ti,clkbuf-sel = <0x7>;
@@ -647,6 +648,7 @@ sdhci1: mmc@fa00000 {
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 3>, <&k3_clks 58 4>;
clock-names = "clk_ahb", "clk_xin";
+ bus-width = <4>;
ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
@@ -494,7 +494,6 @@ eeprom@0 {
/* eMMC */
&sdhci0 {
status = "okay";
- bus-width = <8>;
non-removable;
ti,driver-strength-ohm = <50>;
disable-wp;
@@ -506,7 +505,6 @@ &sdhci1 {
status = "okay";
vmmc-supply = <&vdd_mmc1>;
pinctrl-names = "default";
- bus-width = <4>;
pinctrl-0 = <&main_mmc1_pins_default>;
disable-wp;
};
@@ -469,7 +469,6 @@ &sdhci1 {
status = "okay";
vmmc-supply = <&vdd_mmc1>;
pinctrl-names = "default";
- bus-width = <4>;
pinctrl-0 = <&main_mmc1_pins_default>;
disable-wp;
};
Move bus-width property to *main.dtsi, above the OTAP/ITAP delay values. While there is no error with where it is currently at, it is easier to read the MMC node if the bus-width property is located above the OTAP/ITAP delay values consistently across MMC nodes. Add missing bus-width for MMC2 in k3-am62-main. Signed-off-by: Judith Mendez <jm@ti.com> --- Changes since V3: - No change --- arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 5 +++-- arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 1 - arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 2 ++ arch/arm64/boot/dts/ti/k3-am642-evm.dts | 2 -- arch/arm64/boot/dts/ti/k3-am642-sk.dts | 1 - 6 files changed, 6 insertions(+), 7 deletions(-)