@@ -1223,7 +1223,58 @@ exti: interrupt-controller@5000d000 {
compatible = "st,stm32mp1-exti", "syscon";
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
reg = <0x5000d000 0x400>;
+
+ exti-interrupt-map {
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupt-map-mask = <0xffffffff 0>;
+ interrupt-map =
+ <0 0 &intc GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &intc GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &intc GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &intc GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &intc GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &intc GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <6 0 &intc GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <7 0 &intc GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <8 0 &intc GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <9 0 &intc GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <10 0 &intc GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <11 0 &intc GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <12 0 &intc GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <13 0 &intc GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <14 0 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <15 0 &intc GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <16 0 &intc GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <19 0 &intc GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <21 0 &intc GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <22 0 &intc GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <23 0 &intc GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <24 0 &intc GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <25 0 &intc GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <26 0 &intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <27 0 &intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <28 0 &intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <29 0 &intc GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <30 0 &intc GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <31 0 &intc GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <32 0 &intc GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+ <33 0 &intc GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+ <46 0 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <47 0 &intc GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+ <48 0 &intc GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <50 0 &intc GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+ <52 0 &intc GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <53 0 &intc GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <54 0 &intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <61 0 &intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <65 0 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <68 0 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <70 0 &intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+ <73 0 &intc GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
syscfg: syscon@50020000 {
Stop using the internal table of the exti driver and use the more flexible interrupt-map feature in DT. Convert the driver's table for stm32mp151 to the interrupt-map property in DT. Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> --- arch/arm/boot/dts/st/stm32mp151.dtsi | 51 ++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+)