| Message ID | 20240216223654.1312880-12-sre@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | UNI-T UTi260B support | expand |
On 16/02/2024 23:34, Sebastian Reichel wrote: > Replace all "xnur-gpio" with "xnur-gpios" in the i.MX6UL(L) Touchscreen > node, since the -gpio suffix is deprecated. All known implementations of > this binding can handle -gpio and -gpios since day 1, so this should be > fully backwards compatible. > > Signed-off-by: Sebastian Reichel <sre@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi index 2ac40d69425b..f10f0525490b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi @@ -321,7 +321,7 @@ &snvs_pwrkey { &tsc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tsc>; - xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; measure-delay-time = <0xffff>; pre-charge-time = <0xfff>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts index 875ae699c5cb..2ca18f3dad0a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts @@ -203,7 +203,7 @@ &pwm8 { &tsc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tsc>; - xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; }; &sai2 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi index 18cac19aa9b0..af337f18a266 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi @@ -156,7 +156,7 @@ &snvs_pwrkey { &tsc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tsc>; - xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; measure-delay-time = <0xffff>; pre-charge-time = <0xffff>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi index 830b5a5064f2..6d2163250b5d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi @@ -273,7 +273,7 @@ &tsc { pinctrl-names = "default"; pre-charge-time = <0xfff>; touchscreen-average-samples = <32>; - xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; }; /* DHCOM UART1 */
Replace all "xnur-gpio" with "xnur-gpios" in the i.MX6UL(L) Touchscreen node, since the -gpio suffix is deprecated. All known implementations of this binding can handle -gpio and -gpios since day 1, so this should be fully backwards compatible. Signed-off-by: Sebastian Reichel <sre@kernel.org> --- arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)