@@ -173,7 +173,7 @@
#define ECC_CEADDR0_RNK_MASK BIT(24)
#define ECC_CEADDR1_BNKGRP_MASK 0x3000000
#define ECC_CEADDR1_BNKNR_MASK 0x70000
-#define ECC_CEADDR1_BLKNR_MASK 0xFFF
+#define ECC_CEADDR1_COL_MASK 0xFFF
#define ECC_CEADDR1_BNKGRP_SHIFT 24
#define ECC_CEADDR1_BNKNR_SHIFT 16
@@ -271,7 +271,6 @@
* @bitpos: Bit position.
* @data: Data causing the error.
* @bankgrpnr: Bank group number.
- * @blknr: Block number.
*/
struct ecc_error_info {
u32 row;
@@ -280,7 +279,6 @@ struct ecc_error_info {
u32 bitpos;
u32 data;
u32 bankgrpnr;
- u32 blknr;
};
/**
@@ -433,7 +431,7 @@ static int zynqmp_get_error_info(struct synps_edac_priv *priv)
ECC_CEADDR1_BNKNR_SHIFT;
p->ceinfo.bankgrpnr = (regval & ECC_CEADDR1_BNKGRP_MASK) >>
ECC_CEADDR1_BNKGRP_SHIFT;
- p->ceinfo.blknr = (regval & ECC_CEADDR1_BLKNR_MASK);
+ p->ceinfo.col = (regval & ECC_CEADDR1_COL_MASK);
p->ceinfo.data = readl(base + ECC_CSYND0_OFST);
edac_dbg(2, "ECCCSYN0: 0x%08X ECCCSYN1: 0x%08X ECCCSYN2: 0x%08X\n",
readl(base + ECC_CSYND0_OFST), readl(base + ECC_CSYND1_OFST),
@@ -449,7 +447,7 @@ static int zynqmp_get_error_info(struct synps_edac_priv *priv)
ECC_CEADDR1_BNKGRP_SHIFT;
p->ueinfo.bank = (regval & ECC_CEADDR1_BNKNR_MASK) >>
ECC_CEADDR1_BNKNR_SHIFT;
- p->ueinfo.blknr = (regval & ECC_CEADDR1_BLKNR_MASK);
+ p->ueinfo.col = (regval & ECC_CEADDR1_COL_MASK);
p->ueinfo.data = readl(base + ECC_UESYND0_OFST);
out:
spin_lock_irqsave(&priv->reglock, flags);
@@ -480,10 +478,9 @@ static void handle_error(struct mem_ctl_info *mci, struct synps_ecc_status *p)
pinf = &p->ceinfo;
if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) {
snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
- "DDR ECC error type:%s Row %d Bank %d BankGroup Number %d Block Number %d Bit Position: %d Data: 0x%08x",
- "CE", pinf->row, pinf->bank,
- pinf->bankgrpnr, pinf->blknr,
- pinf->bitpos, pinf->data);
+ "DDR ECC error type:%s Row %d Col %d Bank %d BankGroup Number %d Bit Position: %d Data: 0x%08x",
+ "CE", pinf->row, pinf->col, pinf->bank,
+ pinf->bankgrpnr, pinf->bitpos, pinf->data);
} else {
snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
"DDR ECC error type:%s Row %d Bank %d Col %d Bit Position: %d Data: 0x%08x",
@@ -500,9 +497,9 @@ static void handle_error(struct mem_ctl_info *mci, struct synps_ecc_status *p)
pinf = &p->ueinfo;
if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) {
snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
- "DDR ECC error type :%s Row %d Bank %d BankGroup Number %d Block Number %d",
- "UE", pinf->row, pinf->bank,
- pinf->bankgrpnr, pinf->blknr);
+ "DDR ECC error type :%s Row %d Col %d Bank %d BankGroup Number %d",
+ "UE", pinf->row, pinf->col, pinf->bank,
+ pinf->bankgrpnr);
} else {
snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
"DDR ECC error type :%s Row %d Bank %d Col %d ",
Even though the ECC(C|U)ADDR1 CSR description indeed says it's a "Block number" in the DW uMCTL2 DDRC IP-core databooks, the corresponding register field is named as ECC(C|U)ADDR1.ecc_(un)corr_col (which means ECC (un)corrected column) and in the rest of the document it's referred as the SDRAM address column. Thus use the already available ecc_error_info.col field to read the column number to and drop the questionable ecc_error_info.blknr field for good. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> --- drivers/edac/synopsys_edac.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-)