| Message ID | 20240227052353.1060306-1-andrew@codeconstruct.com.au (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v5] dt-bindings: gpio: aspeed,ast2400-gpio: Convert to DT schema | expand |
On 27/02/2024 06:23, Andrew Jeffery wrote: > Squash warnings such as: > > ``` > arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/apb@1e600000/gpio@1e780000: failed to match any schema with compatible: ['aspeed,ast2400-gpio'] > ``` > > Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> > --- > v5: Resolve macro definition clashes from aspeed clock headers in examples > identified by Rob's bot: > > https://lore.kernel.org/all/170900020204.2360855.790404478830111761.robh@kernel.org/ > > Clearly I missed running `make dt_binding_check` on the final iteration of > the v4 patch I sent. Hopefully I'm running out of rakes to step on here! > > v4: https://lore.kernel.org/all/20240227004414.841391-1-andrew@codeconstruct.com.au/ > > Add constraints for gpio-line-names, ngpios as requested by Krzysztof: > https://lore.kernel.org/all/458becdb-fb1e-4808-87b6-3037ec945647@linaro.org/ > > Add more examples to exercise constraints. No, one or two examples (if there are quite different) is enough. > > v3: https://lore.kernel.org/all/20240226051645.414935-1-andrew@codeconstruct.com.au/ > > Base on v6.8-rc6, fix yamllint warning > > Rob's bot picked the missing `#interrupt-cells` in the example on v2[1]. The > patch was based on v6.8-rc1, and going back over my shell history I missed > the following output from `make dt_binding_check`: > > ``` > ... > LINT Documentation/devicetree/bindings > usage: yamllint [-h] [-] [-c CONFIG_FILE | -d CONFIG_DATA] [--list-files] [-f {parsable,standard,colored,github,auto}] [-s] [--no-warnings] [-v] [FILE_OR_DIR ...] > yamllint: error: one of the arguments FILE_OR_DIR - is required > ... > ``` > > I've rebased on v6.8-rc6 and no-longer see the issue with the invocation > of `yamllint`. > > [1]: https://lore.kernel.org/all/170892197611.2260479.15343562563553959436.robh@kernel.org/ > > v2: https://lore.kernel.org/all/20240226031951.284847-1-andrew@codeconstruct.com.au/ > > Address feedback from Krzysztof: > https://lore.kernel.org/all/0d1dd262-b6dd-4d71-9239-8b0aec8cceff@linaro.org/ > > v1: https://lore.kernel.org/all/20240220052918.742793-1-andrew@codeconstruct.com.au/ > > .../bindings/gpio/aspeed,ast2400-gpio.yaml | 143 ++++++++++++++++++ > .../devicetree/bindings/gpio/gpio-aspeed.txt | 39 ----- > 2 files changed, 143 insertions(+), 39 deletions(-) > create mode 100644 Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml > delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-aspeed.txt > > diff --git a/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml > new file mode 100644 > index 000000000000..1aa28b1817cf > --- /dev/null > +++ b/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml > @@ -0,0 +1,143 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Aspeed GPIO controller > + > +maintainers: > + - Andrew Jeffery <andrew@codeconstruct.com.au> > + > +properties: > + compatible: > + enum: > + - aspeed,ast2400-gpio > + - aspeed,ast2500-gpio > + - aspeed,ast2600-gpio > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + description: The clock to use for debounce timings > + > + gpio-controller: true > + gpio-line-names: true min/maxItems > + gpio-ranges: true > + > + "#gpio-cells": > + const: 2 > + > + interrupts: > + maxItems: 1 > + > + interrupt-controller: true > + > + "#interrupt-cells": > + const: 2 > + > + ngpios: true minimum/maximum. > + > +required: > + - compatible > + - reg > + - interrupts > + - interrupt-controller > + - "#interrupt-cells" > + - gpio-controller > + - "#gpio-cells" > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + const: aspeed,ast2400-gpio > + then: > + properties: > + gpio-line-names: > + minItems: 220 > + maxItems: 220 > + ngpios: > + const: 220 > + - if: > + properties: > + compatible: > + contains: > + const: aspeed,ast2500-gpio > + then: > + properties: > + gpio-line-names: > + minItems: 232 > + maxItems: 232 > + ngpios: > + const: 232 > + - if: > + properties: > + compatible: > + contains: > + const: aspeed,ast2600-gpio > + then: > + properties: > + gpio-line-names: > + minItems: 36 > + maxItems: 208 > + ngpios: > + enum: [ 36, 208 ] > + required: > + - ngpios Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml new file mode 100644 index 000000000000..1aa28b1817cf --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed GPIO controller + +maintainers: + - Andrew Jeffery <andrew@codeconstruct.com.au> + +properties: + compatible: + enum: + - aspeed,ast2400-gpio + - aspeed,ast2500-gpio + - aspeed,ast2600-gpio + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: The clock to use for debounce timings + + gpio-controller: true + gpio-line-names: true + gpio-ranges: true + + "#gpio-cells": + const: 2 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + ngpios: true + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - gpio-controller + - "#gpio-cells" + +allOf: + - if: + properties: + compatible: + contains: + const: aspeed,ast2400-gpio + then: + properties: + gpio-line-names: + minItems: 220 + maxItems: 220 + ngpios: + const: 220 + - if: + properties: + compatible: + contains: + const: aspeed,ast2500-gpio + then: + properties: + gpio-line-names: + minItems: 232 + maxItems: 232 + ngpios: + const: 232 + - if: + properties: + compatible: + contains: + const: aspeed,ast2600-gpio + then: + properties: + gpio-line-names: + minItems: 36 + maxItems: 208 + ngpios: + enum: [ 36, 208 ] + required: + - ngpios + +additionalProperties: false + +examples: + - | + gpio@1e780000 { + compatible = "aspeed,ast2400-gpio"; + reg = <0x1e780000 0x1000>; + interrupts = <20>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + - | + gpio: gpio@1e780000 { + compatible = "aspeed,ast2500-gpio"; + reg = <0x1e780000 0x200>; + interrupts = <20>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 232>; + }; + - | + #include <dt-bindings/clock/ast2600-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + gpio0: gpio@1e780000 { + compatible = "aspeed,ast2600-gpio"; + reg = <0x1e780000 0x400>; + clocks = <&syscon ASPEED_CLK_APB2>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 208>; + ngpios = <208>; + }; + gpio1: gpio@1e780800 { + compatible = "aspeed,ast2600-gpio"; + reg = <0x1e780800 0x800>; + clocks = <&syscon ASPEED_CLK_APB1>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 208 36>; + ngpios = <36>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt deleted file mode 100644 index b2033fc3a71a..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt +++ /dev/null @@ -1,39 +0,0 @@ -Aspeed GPIO controller Device Tree Bindings -------------------------------------------- - -Required properties: -- compatible : Either "aspeed,ast2400-gpio", "aspeed,ast2500-gpio", - or "aspeed,ast2600-gpio". - -- #gpio-cells : Should be two - - First cell is the GPIO line number - - Second cell is used to specify optional - parameters (unused) - -- reg : Address and length of the register set for the device -- gpio-controller : Marks the device node as a GPIO controller. -- interrupts : Interrupt specifier (see interrupt bindings for - details) -- interrupt-controller : Mark the GPIO controller as an interrupt-controller - -Optional properties: - -- clocks : A phandle to the clock to use for debounce timings -- ngpios : Number of GPIOs controlled by this controller. Should be set - when there are multiple GPIO controllers on a SoC (ast2600). - -The gpio and interrupt properties are further described in their respective -bindings documentation: - -- Documentation/devicetree/bindings/gpio/gpio.txt -- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - - Example: - gpio@1e780000 { - #gpio-cells = <2>; - compatible = "aspeed,ast2400-gpio"; - gpio-controller; - interrupts = <20>; - reg = <0x1e780000 0x1000>; - interrupt-controller; - };
Squash warnings such as: ``` arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/apb@1e600000/gpio@1e780000: failed to match any schema with compatible: ['aspeed,ast2400-gpio'] ``` Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> --- v5: Resolve macro definition clashes from aspeed clock headers in examples identified by Rob's bot: https://lore.kernel.org/all/170900020204.2360855.790404478830111761.robh@kernel.org/ Clearly I missed running `make dt_binding_check` on the final iteration of the v4 patch I sent. Hopefully I'm running out of rakes to step on here! v4: https://lore.kernel.org/all/20240227004414.841391-1-andrew@codeconstruct.com.au/ Add constraints for gpio-line-names, ngpios as requested by Krzysztof: https://lore.kernel.org/all/458becdb-fb1e-4808-87b6-3037ec945647@linaro.org/ Add more examples to exercise constraints. v3: https://lore.kernel.org/all/20240226051645.414935-1-andrew@codeconstruct.com.au/ Base on v6.8-rc6, fix yamllint warning Rob's bot picked the missing `#interrupt-cells` in the example on v2[1]. The patch was based on v6.8-rc1, and going back over my shell history I missed the following output from `make dt_binding_check`: ``` ... LINT Documentation/devicetree/bindings usage: yamllint [-h] [-] [-c CONFIG_FILE | -d CONFIG_DATA] [--list-files] [-f {parsable,standard,colored,github,auto}] [-s] [--no-warnings] [-v] [FILE_OR_DIR ...] yamllint: error: one of the arguments FILE_OR_DIR - is required ... ``` I've rebased on v6.8-rc6 and no-longer see the issue with the invocation of `yamllint`. [1]: https://lore.kernel.org/all/170892197611.2260479.15343562563553959436.robh@kernel.org/ v2: https://lore.kernel.org/all/20240226031951.284847-1-andrew@codeconstruct.com.au/ Address feedback from Krzysztof: https://lore.kernel.org/all/0d1dd262-b6dd-4d71-9239-8b0aec8cceff@linaro.org/ v1: https://lore.kernel.org/all/20240220052918.742793-1-andrew@codeconstruct.com.au/ .../bindings/gpio/aspeed,ast2400-gpio.yaml | 143 ++++++++++++++++++ .../devicetree/bindings/gpio/gpio-aspeed.txt | 39 ----- 2 files changed, 143 insertions(+), 39 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-aspeed.txt base-commit: d206a76d7d2726f3b096037f2079ce0bd3ba329b