@@ -519,7 +519,7 @@ struct nmk_gpio_chip *nmk_gpio_populate_chip(struct device_node *np,
nmk_chip->bank = id;
chip = &nmk_chip->chip;
- chip->base = id * NMK_GPIO_PER_CHIP;
+ chip->base = -1;
chip->ngpio = NMK_GPIO_PER_CHIP;
chip->label = dev_name(gpio_dev);
chip->parent = gpio_dev;
@@ -531,25 +531,33 @@ static int nmk_get_group_pins(struct pinctrl_dev *pctldev, unsigned int selector
return 0;
}
-static struct nmk_gpio_chip *find_nmk_gpio_from_pin(unsigned int pin)
+/* This makes the mapping from pin number to a GPIO chip. We also return the pin
+ * offset in the GPIO chip for convenience (and to avoid a second loop).
+ */
+static struct nmk_gpio_chip *find_nmk_gpio_from_pin(unsigned int pin,
+ unsigned int *offset)
{
- int i;
+ int i, j = 0;
struct nmk_gpio_chip *nmk_gpio;
+ /* We assume that pins are allocated in bank order. */
for (i = 0; i < NMK_MAX_BANKS; i++) {
nmk_gpio = nmk_gpio_chips[i];
if (!nmk_gpio)
continue;
- if (pin >= nmk_gpio->chip.base &&
- pin < nmk_gpio->chip.base + nmk_gpio->chip.ngpio)
+ if (pin >= j && pin < j + nmk_gpio->chip.ngpio) {
+ if (offset)
+ *offset = pin - j;
return nmk_gpio;
+ }
+ j += nmk_gpio->chip.ngpio;
}
return NULL;
}
static struct gpio_chip *find_gc_from_pin(unsigned int pin)
{
- struct nmk_gpio_chip *nmk_gpio = find_nmk_gpio_from_pin(pin);
+ struct nmk_gpio_chip *nmk_gpio = find_nmk_gpio_from_pin(pin, NULL);
if (nmk_gpio)
return &nmk_gpio->chip;
@@ -905,8 +913,18 @@ static int nmk_pmx_set(struct pinctrl_dev *pctldev, unsigned int function,
* switching to the ALT C function.
*/
for (i = 0; i < g->grp.npins; i++) {
- unsigned int bit = g->grp.pins[i] % NMK_GPIO_PER_CHIP;
- slpm[g->grp.pins[i] / NMK_GPIO_PER_CHIP] &= ~BIT(bit);
+ struct nmk_gpio_chip *nmk_chip;
+ unsigned int bit;
+
+ nmk_chip = find_nmk_gpio_from_pin(g->grp.pins[i], &bit);
+ if (!nmk_chip) {
+ dev_err(npct->dev,
+ "invalid pin offset %d in group %s at index %d\n",
+ g->grp.pins[i], g->grp.name, i);
+ goto out_pre_slpm_init;
+ }
+
+ slpm[nmk_chip->bank] &= ~BIT(bit);
}
nmk_gpio_glitch_slpm_init(slpm);
}
@@ -915,7 +933,7 @@ static int nmk_pmx_set(struct pinctrl_dev *pctldev, unsigned int function,
struct nmk_gpio_chip *nmk_chip;
unsigned int bit;
- nmk_chip = find_nmk_gpio_from_pin(g->grp.pins[i]);
+ nmk_chip = find_nmk_gpio_from_pin(g->grp.pins[i], &bit);
if (!nmk_chip) {
dev_err(npct->dev,
"invalid pin offset %d in group %s at index %d\n",
@@ -926,7 +944,6 @@ static int nmk_pmx_set(struct pinctrl_dev *pctldev, unsigned int function,
g->grp.pins[i], g->altsetting);
clk_enable(nmk_chip->clk);
- bit = g->grp.pins[i] % NMK_GPIO_PER_CHIP;
/*
* If the pin is switching to altfunc, and there was an
* interrupt installed on it which has been lazy disabled,
@@ -957,17 +974,18 @@ static int nmk_pmx_set(struct pinctrl_dev *pctldev, unsigned int function,
ret = 0;
out_glitch:
- if (glitch) {
+ if (glitch)
nmk_gpio_glitch_slpm_restore(slpm);
+out_pre_slpm_init:
+ if (glitch)
spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
- }
return ret;
}
static int nmk_gpio_request_enable(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
- unsigned int offset)
+ unsigned int pin)
{
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
struct nmk_gpio_chip *nmk_chip;
@@ -985,10 +1003,11 @@ static int nmk_gpio_request_enable(struct pinctrl_dev *pctldev,
chip = range->gc;
nmk_chip = gpiochip_get_data(chip);
- dev_dbg(npct->dev, "enable pin %u as GPIO\n", offset);
+ dev_dbg(npct->dev, "enable pin %u as GPIO\n", pin);
+
+ find_nmk_gpio_from_pin(pin, &bit);
clk_enable(nmk_chip->clk);
- bit = offset % NMK_GPIO_PER_CHIP;
/* There is no glitch when converting any pin to GPIO */
__nmk_gpio_set_mode(nmk_chip, bit, NMK_GPIO_ALT_GPIO);
clk_disable(nmk_chip->clk);
@@ -998,11 +1017,11 @@ static int nmk_gpio_request_enable(struct pinctrl_dev *pctldev,
static void nmk_gpio_disable_free(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
- unsigned int offset)
+ unsigned int pin)
{
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
- dev_dbg(npct->dev, "disable pin %u as GPIO\n", offset);
+ dev_dbg(npct->dev, "disable pin %u as GPIO\n", pin);
/* Set the pin to some default state, GPIO is usually default */
}
@@ -1043,7 +1062,7 @@ static int nmk_pin_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
int pull, slpm, output, val, i;
bool lowemi, gpiomode, sleep;
- nmk_chip = find_nmk_gpio_from_pin(pin);
+ nmk_chip = find_nmk_gpio_from_pin(pin, &bit);
if (!nmk_chip) {
dev_err(npct->dev,
"invalid pin offset %d\n", pin);
@@ -1101,7 +1120,6 @@ static int nmk_pin_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
lowemi ? "on" : "off");
clk_enable(nmk_chip->clk);
- bit = pin % NMK_GPIO_PER_CHIP;
if (gpiomode)
/* No glitch when going to GPIO mode */
__nmk_gpio_set_mode(nmk_chip, bit, NMK_GPIO_ALT_GPIO);
Move away from statically allocated GPIO IDs. Switch to dynamic ID allocation. Static IDs are deprecated because they cause issues when multiple GPIO controllers are to be found on the same platform. Add a bit of complexity to do pin number -> GPIO chip + offset. Previously, bank number and offsets were retrieved using division and remainder (bank size being constant 32). Now, to get the pin number matching a bank base, we must know the sum of ngpios of previous banks. This is done in find_nmk_gpio_from_pin() which also exposes the offset inside the bank. Also remove the assumption that bank sizes are constant. Instead of using NMK_GPIO_PER_CHIP as bank size, use nmk_gpio_chips[i]->ngpio. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> --- drivers/gpio/gpio-nomadik.c | 2 +- drivers/pinctrl/nomadik/pinctrl-nomadik.c | 54 ++++++++++++++++++++----------- 2 files changed, 37 insertions(+), 19 deletions(-)