| Message ID | 20240301144403.2977-3-jason-jh.lin@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add CMDQ API for upcoming ISP feature | expand |
Hi, Jason: On Fri, 2024-03-01 at 22:44 +0800, Jason-JH.Lin wrote: > Add cmdq_pkt_mem_move() function to support CMDQ user making > an instruction for moving a value from a source address to a > destination address. > > Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> > --- > drivers/soc/mediatek/mtk-cmdq-helper.c | 26 > ++++++++++++++++++++++++++ > include/linux/soc/mediatek/mtk-cmdq.h | 10 ++++++++++ > 2 files changed, 36 insertions(+) > > diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c > b/drivers/soc/mediatek/mtk-cmdq-helper.c > index b0cd071c4719..3a1e47ad8a41 100644 > --- a/drivers/soc/mediatek/mtk-cmdq-helper.c > +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c > @@ -299,6 +299,32 @@ int cmdq_pkt_write_s_mask_value(struct cmdq_pkt > *pkt, u8 high_addr_reg_idx, > } > EXPORT_SYMBOL(cmdq_pkt_write_s_mask_value); > > +s32 cmdq_pkt_mem_move(struct cmdq_pkt *pkt, dma_addr_t src_addr, > dma_addr_t dst_addr) return type int. > +{ > + s32 err; It may not error, so I prefer to use 'ret'. Move this after the next two declaration. > + const u16 tmp_reg_idx = CMDQ_THR_SPR_IDX0; > + const u16 swap_reg_idx = CMDQ_THR_SPR_IDX1; I would like tmp_reg_idx to be high_addr_reg_idx and swap_reg_idx to be value_reg_idx. Regards, CK > + > + /* read the value of src_addr into swap_reg_idx */ > + err = cmdq_pkt_assign(pkt, tmp_reg_idx, > CMDQ_ADDR_HIGH(src_addr)); > + if (err < 0) > + return err; > + err = cmdq_pkt_read_s(pkt, tmp_reg_idx, > CMDQ_ADDR_LOW(src_addr), swap_reg_idx); > + if (err < 0) > + return err; > + > + /* write the value of swap_reg_idx into dst_addr */ > + err = cmdq_pkt_assign(pkt, tmp_reg_idx, > CMDQ_ADDR_HIGH(dst_addr)); > + if (err < 0) > + return err; > + err = cmdq_pkt_write_s(pkt, tmp_reg_idx, > CMDQ_ADDR_LOW(dst_addr), swap_reg_idx); > + if (err < 0) > + return err; > + > + return err; > +} > +EXPORT_SYMBOL(cmdq_pkt_mem_move); > + > int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear) > { > struct cmdq_instruction inst = { {0} }; > diff --git a/include/linux/soc/mediatek/mtk-cmdq.h > b/include/linux/soc/mediatek/mtk-cmdq.h > index 1dae80185f9f..b6dbe2d8f16a 100644 > --- a/include/linux/soc/mediatek/mtk-cmdq.h > +++ b/include/linux/soc/mediatek/mtk-cmdq.h > @@ -182,6 +182,16 @@ int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, > u8 high_addr_reg_idx, > int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 > high_addr_reg_idx, > u16 addr_low, u32 value, u32 mask); > > +/** > + * cmdq_pkt_mem_move() - append memory move command to the CMDQ > packet > + * @pkt: the CMDQ packet > + * @src_addr: source address > + * @dma_addr_t: destination address > + * > + * Return: 0 for success; else the error code is returned > + */ > +int cmdq_pkt_mem_move(struct cmdq_pkt *pkt, dma_addr_t src_addr, > dma_addr_t dst_addr); > + > /** > * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet > * @pkt: the CMDQ packet
Hi CK, Thanks for the reviews. On Mon, 2024-03-04 at 02:39 +0000, CK Hu (胡俊光) wrote: > Hi, Jason: > > On Fri, 2024-03-01 at 22:44 +0800, Jason-JH.Lin wrote: > > Add cmdq_pkt_mem_move() function to support CMDQ user making > > an instruction for moving a value from a source address to a > > destination address. > > > > Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> > > --- > > drivers/soc/mediatek/mtk-cmdq-helper.c | 26 > > ++++++++++++++++++++++++++ > > include/linux/soc/mediatek/mtk-cmdq.h | 10 ++++++++++ > > 2 files changed, 36 insertions(+) > > > > diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c > > b/drivers/soc/mediatek/mtk-cmdq-helper.c > > index b0cd071c4719..3a1e47ad8a41 100644 > > --- a/drivers/soc/mediatek/mtk-cmdq-helper.c > > +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c > > @@ -299,6 +299,32 @@ int cmdq_pkt_write_s_mask_value(struct > > cmdq_pkt > > *pkt, u8 high_addr_reg_idx, > > } > > EXPORT_SYMBOL(cmdq_pkt_write_s_mask_value); > > > > +s32 cmdq_pkt_mem_move(struct cmdq_pkt *pkt, dma_addr_t src_addr, > > dma_addr_t dst_addr) > > return type int. OK, I'll change it. > > > +{ > > + s32 err; > > It may not error, so I prefer to use 'ret'. > Move this after the next two declaration. OK, Ill change it to 'ret' and move it. > > > + const u16 tmp_reg_idx = CMDQ_THR_SPR_IDX0; > > + const u16 swap_reg_idx = CMDQ_THR_SPR_IDX1; > > I would like tmp_reg_idx to be high_addr_reg_idx and swap_reg_idx to > be > value_reg_idx. > OK, I'll rename them. Regards, Jason-JH.Lin > Regards, > CK >
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c index b0cd071c4719..3a1e47ad8a41 100644 --- a/drivers/soc/mediatek/mtk-cmdq-helper.c +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c @@ -299,6 +299,32 @@ int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, } EXPORT_SYMBOL(cmdq_pkt_write_s_mask_value); +s32 cmdq_pkt_mem_move(struct cmdq_pkt *pkt, dma_addr_t src_addr, dma_addr_t dst_addr) +{ + s32 err; + const u16 tmp_reg_idx = CMDQ_THR_SPR_IDX0; + const u16 swap_reg_idx = CMDQ_THR_SPR_IDX1; + + /* read the value of src_addr into swap_reg_idx */ + err = cmdq_pkt_assign(pkt, tmp_reg_idx, CMDQ_ADDR_HIGH(src_addr)); + if (err < 0) + return err; + err = cmdq_pkt_read_s(pkt, tmp_reg_idx, CMDQ_ADDR_LOW(src_addr), swap_reg_idx); + if (err < 0) + return err; + + /* write the value of swap_reg_idx into dst_addr */ + err = cmdq_pkt_assign(pkt, tmp_reg_idx, CMDQ_ADDR_HIGH(dst_addr)); + if (err < 0) + return err; + err = cmdq_pkt_write_s(pkt, tmp_reg_idx, CMDQ_ADDR_LOW(dst_addr), swap_reg_idx); + if (err < 0) + return err; + + return err; +} +EXPORT_SYMBOL(cmdq_pkt_mem_move); + int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear) { struct cmdq_instruction inst = { {0} }; diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h index 1dae80185f9f..b6dbe2d8f16a 100644 --- a/include/linux/soc/mediatek/mtk-cmdq.h +++ b/include/linux/soc/mediatek/mtk-cmdq.h @@ -182,6 +182,16 @@ int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, u16 addr_low, u32 value, u32 mask); +/** + * cmdq_pkt_mem_move() - append memory move command to the CMDQ packet + * @pkt: the CMDQ packet + * @src_addr: source address + * @dma_addr_t: destination address + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_mem_move(struct cmdq_pkt *pkt, dma_addr_t src_addr, dma_addr_t dst_addr); + /** * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet * @pkt: the CMDQ packet
Add cmdq_pkt_mem_move() function to support CMDQ user making an instruction for moving a value from a source address to a destination address. Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> --- drivers/soc/mediatek/mtk-cmdq-helper.c | 26 ++++++++++++++++++++++++++ include/linux/soc/mediatek/mtk-cmdq.h | 10 ++++++++++ 2 files changed, 36 insertions(+)