From patchwork Wed Mar 6 17:59:22 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Th=C3=A9o_Lebrun?= X-Patchwork-Id: 13584360 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 61FCAC54E41 for ; Wed, 6 Mar 2024 17:59:59 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:Cc:To:In-Reply-To:References:Message-Id :MIME-Version:Subject:Date:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=ThcYLJlZaONwM6Li6Kgd6YSCrUEgKK/UdVgl35MGbW0=; b=c7TJEjsMdUqkHr Qi3wrBblRe9LXqkQaeUTKKRjMw8r+fKcvxw1BHPcPMRX4CrRq5JKeoj7qocPWE1iRaBb+TR1g4oXy tIquG9EOFTG8Rtvsl9Hefnc+H2c1FdB2rrUwlzcjpkCURnUTCDwkqMLG4mpDtWbkgt0bFpo4t4nYs YSds8V/J6wZn4SLGIyJSxp9aoJIuCbbHJGHjHnkF+prM5db9ftEVK9ZInJRIHBFC9Vy3+TkAYzbpB UjKLl+77d8BPSBJvMcxnqkq2OcBCDP8pNR0ZwcqMY1Nu8OW7mAA8Ii8BpGkCE7blrC8GcrKJKbfjB d5Mveqj025ds+U05DK2g==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.97.1 #2 (Red Hat Linux)) id 1rhvYJ-00000001JCo-1Vgb; Wed, 06 Mar 2024 17:59:39 +0000 Received: from relay2-d.mail.gandi.net ([217.70.183.194]) by bombadil.infradead.org with esmtps (Exim 4.97.1 #2 (Red Hat Linux)) id 1rhvY6-00000001J3M-0tl4 for linux-arm-kernel@lists.infradead.org; Wed, 06 Mar 2024 17:59:31 +0000 Received: by mail.gandi.net (Postfix) with ESMTPSA id D918740005; Wed, 6 Mar 2024 17:59:23 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1709747964; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=wtXVSWFMzbE8x7y0HtKqO/KodSyvy0LVpz/r+Vm7FEk=; b=JoCoj4vVu2BQ7KJndEnuF9jJzY+AqbPiecrNloX23lKfdgMYbRkZY6AFDm+XuGdBm9tTRG S5Qqvd65QZnGJ8XyZ8tAfRYjYrUWW2MasqL8OoaNRLHDkYIO6OThB6DdWd1WsoeZuEbCRI ZMmg6isCy0OhoBIn8S2mo5YHWHn2fQa2Bk0tPx0sUfN3wAFqONZvPJDsxZmGhXgbzJNEOj XQAAiWTgVsWCWGSgojyXMtZZV5NsB2ROKGrQIM7WcKa89v5+hBPK6W9SDWwaBYChi6uMEL 12Y1zTQGFIE00aHz6sGd++GricnFH6F4T6DXDsrYHqu/Web9teJJNRZ9HCWp3A== From: =?utf-8?q?Th=C3=A9o_Lebrun?= Date: Wed, 06 Mar 2024 18:59:22 +0100 Subject: [PATCH v3 02/11] i2c: nomadik: rename private struct pointers from dev to priv MIME-Version: 1.0 Message-Id: <20240306-mbly-i2c-v3-2-605f866aa4ec@bootlin.com> References: <20240306-mbly-i2c-v3-0-605f866aa4ec@bootlin.com> In-Reply-To: <20240306-mbly-i2c-v3-0-605f866aa4ec@bootlin.com> To: Linus Walleij , Andi Shyti , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Thomas Bogendoerfer Cc: linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mips@vger.kernel.org, Gregory Clement , Vladimir Kondratiev , Thomas Petazzoni , Tawfik Bayouk , =?utf-8?q?Th=C3=A9o_Lebrun?= , Wolfram Sang X-Mailer: b4 0.13.0 X-GND-Sasl: theo.lebrun@bootlin.com X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20240306_095926_628100_ADD269C2 X-CRM114-Status: GOOD ( 26.28 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Disambiguate the usage of dev as a variable name; it is usually best to keep it reserved for struct device pointers. Avoid having multiple names for the same struct pointer (previously: dev, nmk, nmk_i2c). Fix whitespace code style; return indented twice, spacing besides infix operators, align function call arguments to opening parenthesis. Remove useless cast to unused return value from init_hw(). Introduce local dev variable in probe() to alias &adev->dev. Reviewed-by: Linus Walleij Reviewed-by: Andi Shyti Acked-by: Wolfram Sang Signed-off-by: Théo Lebrun --- drivers/i2c/busses/i2c-nomadik.c | 428 +++++++++++++++++++-------------------- 1 file changed, 214 insertions(+), 214 deletions(-) diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index b10574d42b7a..cd511c884f99 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -206,12 +206,12 @@ static inline void i2c_clr_bit(void __iomem *reg, u32 mask) /** * flush_i2c_fifo() - This function flushes the I2C FIFO - * @dev: private data of I2C Driver + * @priv: private data of I2C Driver * * This function flushes the I2C Tx and Rx FIFOs. It returns * 0 on successful flushing of FIFO */ -static int flush_i2c_fifo(struct nmk_i2c_dev *dev) +static int flush_i2c_fifo(struct nmk_i2c_dev *priv) { #define LOOP_ATTEMPTS 10 int i; @@ -224,19 +224,19 @@ static int flush_i2c_fifo(struct nmk_i2c_dev *dev) * bits, until then no one must access Tx, Rx FIFO and * should poll on these bits waiting for the completion. */ - writel((I2C_CR_FTX | I2C_CR_FRX), dev->virtbase + I2C_CR); + writel((I2C_CR_FTX | I2C_CR_FRX), priv->virtbase + I2C_CR); for (i = 0; i < LOOP_ATTEMPTS; i++) { - timeout = jiffies + dev->adap.timeout; + timeout = jiffies + priv->adap.timeout; while (!time_after(jiffies, timeout)) { - if ((readl(dev->virtbase + I2C_CR) & + if ((readl(priv->virtbase + I2C_CR) & (I2C_CR_FTX | I2C_CR_FRX)) == 0) - return 0; + return 0; } } - dev_err(&dev->adev->dev, + dev_err(&priv->adev->dev, "flushing operation timed out giving up after %d attempts", LOOP_ATTEMPTS); @@ -245,45 +245,45 @@ static int flush_i2c_fifo(struct nmk_i2c_dev *dev) /** * disable_all_interrupts() - Disable all interrupts of this I2c Bus - * @dev: private data of I2C Driver + * @priv: private data of I2C Driver */ -static void disable_all_interrupts(struct nmk_i2c_dev *dev) +static void disable_all_interrupts(struct nmk_i2c_dev *priv) { u32 mask = IRQ_MASK(0); - writel(mask, dev->virtbase + I2C_IMSCR); + writel(mask, priv->virtbase + I2C_IMSCR); } /** * clear_all_interrupts() - Clear all interrupts of I2C Controller - * @dev: private data of I2C Driver + * @priv: private data of I2C Driver */ -static void clear_all_interrupts(struct nmk_i2c_dev *dev) +static void clear_all_interrupts(struct nmk_i2c_dev *priv) { u32 mask; mask = IRQ_MASK(I2C_CLEAR_ALL_INTS); - writel(mask, dev->virtbase + I2C_ICR); + writel(mask, priv->virtbase + I2C_ICR); } /** * init_hw() - initialize the I2C hardware - * @dev: private data of I2C Driver + * @priv: private data of I2C Driver */ -static int init_hw(struct nmk_i2c_dev *dev) +static int init_hw(struct nmk_i2c_dev *priv) { int stat; - stat = flush_i2c_fifo(dev); + stat = flush_i2c_fifo(priv); if (stat) goto exit; /* disable the controller */ - i2c_clr_bit(dev->virtbase + I2C_CR, I2C_CR_PE); + i2c_clr_bit(priv->virtbase + I2C_CR, I2C_CR_PE); - disable_all_interrupts(dev); + disable_all_interrupts(priv); - clear_all_interrupts(dev); + clear_all_interrupts(priv); - dev->cli.operation = I2C_NO_OPERATION; + priv->cli.operation = I2C_NO_OPERATION; exit: return stat; @@ -294,15 +294,15 @@ static int init_hw(struct nmk_i2c_dev *dev) /** * load_i2c_mcr_reg() - load the MCR register - * @dev: private data of controller + * @priv: private data of controller * @flags: message flags */ -static u32 load_i2c_mcr_reg(struct nmk_i2c_dev *dev, u16 flags) +static u32 load_i2c_mcr_reg(struct nmk_i2c_dev *priv, u16 flags) { u32 mcr = 0; unsigned short slave_adr_3msb_bits; - mcr |= GEN_MASK(dev->cli.slave_adr, I2C_MCR_A7, 1); + mcr |= GEN_MASK(priv->cli.slave_adr, I2C_MCR_A7, 1); if (unlikely(flags & I2C_M_TEN)) { /* 10-bit address transaction */ @@ -313,7 +313,7 @@ static u32 load_i2c_mcr_reg(struct nmk_i2c_dev *dev, u16 flags) * the extension (MSB bits) of the 7 bit address loaded * in A7 */ - slave_adr_3msb_bits = (dev->cli.slave_adr >> 7) & 0x7; + slave_adr_3msb_bits = (priv->cli.slave_adr >> 7) & 0x7; mcr |= GEN_MASK(slave_adr_3msb_bits, I2C_MCR_EA10, 8); } else { @@ -325,40 +325,40 @@ static u32 load_i2c_mcr_reg(struct nmk_i2c_dev *dev, u16 flags) mcr |= GEN_MASK(0, I2C_MCR_SB, 11); /* check the operation, master read/write? */ - if (dev->cli.operation == I2C_WRITE) + if (priv->cli.operation == I2C_WRITE) mcr |= GEN_MASK(I2C_WRITE, I2C_MCR_OP, 0); else mcr |= GEN_MASK(I2C_READ, I2C_MCR_OP, 0); /* stop or repeated start? */ - if (dev->stop) + if (priv->stop) mcr |= GEN_MASK(1, I2C_MCR_STOP, 14); else mcr &= ~(GEN_MASK(1, I2C_MCR_STOP, 14)); - mcr |= GEN_MASK(dev->cli.count, I2C_MCR_LENGTH, 15); + mcr |= GEN_MASK(priv->cli.count, I2C_MCR_LENGTH, 15); return mcr; } /** * setup_i2c_controller() - setup the controller - * @dev: private data of controller + * @priv: private data of controller */ -static void setup_i2c_controller(struct nmk_i2c_dev *dev) +static void setup_i2c_controller(struct nmk_i2c_dev *priv) { u32 brcr1, brcr2; u32 i2c_clk, div; u32 ns; u16 slsu; - writel(0x0, dev->virtbase + I2C_CR); - writel(0x0, dev->virtbase + I2C_HSMCR); - writel(0x0, dev->virtbase + I2C_TFTR); - writel(0x0, dev->virtbase + I2C_RFTR); - writel(0x0, dev->virtbase + I2C_DMAR); + writel(0x0, priv->virtbase + I2C_CR); + writel(0x0, priv->virtbase + I2C_HSMCR); + writel(0x0, priv->virtbase + I2C_TFTR); + writel(0x0, priv->virtbase + I2C_RFTR); + writel(0x0, priv->virtbase + I2C_DMAR); - i2c_clk = clk_get_rate(dev->clk); + i2c_clk = clk_get_rate(priv->clk); /* * set the slsu: @@ -373,7 +373,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev) * slsu = cycles / (1000000000 / f) + 1 */ ns = DIV_ROUND_UP_ULL(1000000000ULL, i2c_clk); - switch (dev->sm) { + switch (priv->sm) { case I2C_FREQ_MODE_FAST: case I2C_FREQ_MODE_FAST_PLUS: slsu = DIV_ROUND_UP(100, ns); /* Fast */ @@ -388,15 +388,15 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev) } slsu += 1; - dev_dbg(&dev->adev->dev, "calculated SLSU = %04x\n", slsu); - writel(slsu << 16, dev->virtbase + I2C_SCR); + dev_dbg(&priv->adev->dev, "calculated SLSU = %04x\n", slsu); + writel(slsu << 16, priv->virtbase + I2C_SCR); /* * The spec says, in case of std. mode the divider is * 2 whereas it is 3 for fast and fastplus mode of * operation. TODO - high speed support. */ - div = (dev->clk_freq > I2C_MAX_STANDARD_MODE_FREQ) ? 3 : 2; + div = (priv->clk_freq > I2C_MAX_STANDARD_MODE_FREQ) ? 3 : 2; /* * generate the mask for baud rate counters. The controller @@ -406,10 +406,10 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev) * so set brcr1 to 0. */ brcr1 = 0 << 16; - brcr2 = (i2c_clk/(dev->clk_freq * div)) & 0xffff; + brcr2 = (i2c_clk / (priv->clk_freq * div)) & 0xffff; /* set the baud rate counter register */ - writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR); + writel((brcr1 | brcr2), priv->virtbase + I2C_BRCR); /* * set the speed mode. Currently we support @@ -417,125 +417,124 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev) * TODO - support for fast mode plus (up to 1Mb/s) * and high speed (up to 3.4 Mb/s) */ - if (dev->sm > I2C_FREQ_MODE_FAST) { - dev_err(&dev->adev->dev, + if (priv->sm > I2C_FREQ_MODE_FAST) { + dev_err(&priv->adev->dev, "do not support this mode defaulting to std. mode\n"); brcr2 = i2c_clk / (I2C_MAX_STANDARD_MODE_FREQ * 2) & 0xffff; - writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR); + writel((brcr1 | brcr2), priv->virtbase + I2C_BRCR); writel(I2C_FREQ_MODE_STANDARD << 4, - dev->virtbase + I2C_CR); + priv->virtbase + I2C_CR); } - writel(dev->sm << 4, dev->virtbase + I2C_CR); + writel(priv->sm << 4, priv->virtbase + I2C_CR); /* set the Tx and Rx FIFO threshold */ - writel(dev->tft, dev->virtbase + I2C_TFTR); - writel(dev->rft, dev->virtbase + I2C_RFTR); + writel(priv->tft, priv->virtbase + I2C_TFTR); + writel(priv->rft, priv->virtbase + I2C_RFTR); } /** * read_i2c() - Read from I2C client device - * @dev: private data of I2C Driver + * @priv: private data of I2C Driver * @flags: message flags * * This function reads from i2c client device when controller is in * master mode. There is a completion timeout. If there is no transfer * before timeout error is returned. */ -static int read_i2c(struct nmk_i2c_dev *dev, u16 flags) +static int read_i2c(struct nmk_i2c_dev *priv, u16 flags) { int status = 0; u32 mcr, irq_mask; unsigned long timeout; - mcr = load_i2c_mcr_reg(dev, flags); - writel(mcr, dev->virtbase + I2C_MCR); + mcr = load_i2c_mcr_reg(priv, flags); + writel(mcr, priv->virtbase + I2C_MCR); /* load the current CR value */ - writel(readl(dev->virtbase + I2C_CR) | DEFAULT_I2C_REG_CR, - dev->virtbase + I2C_CR); + writel(readl(priv->virtbase + I2C_CR) | DEFAULT_I2C_REG_CR, + priv->virtbase + I2C_CR); /* enable the controller */ - i2c_set_bit(dev->virtbase + I2C_CR, I2C_CR_PE); + i2c_set_bit(priv->virtbase + I2C_CR, I2C_CR_PE); - init_completion(&dev->xfer_complete); + init_completion(&priv->xfer_complete); /* enable interrupts by setting the mask */ irq_mask = (I2C_IT_RXFNF | I2C_IT_RXFF | I2C_IT_MAL | I2C_IT_BERR); - if (dev->stop || !dev->vendor->has_mtdws) + if (priv->stop || !priv->vendor->has_mtdws) irq_mask |= I2C_IT_MTD; else irq_mask |= I2C_IT_MTDWS; irq_mask = I2C_CLEAR_ALL_INTS & IRQ_MASK(irq_mask); - writel(readl(dev->virtbase + I2C_IMSCR) | irq_mask, - dev->virtbase + I2C_IMSCR); + writel(readl(priv->virtbase + I2C_IMSCR) | irq_mask, + priv->virtbase + I2C_IMSCR); timeout = wait_for_completion_timeout( - &dev->xfer_complete, dev->adap.timeout); + &priv->xfer_complete, priv->adap.timeout); if (timeout == 0) { /* Controller timed out */ - dev_err(&dev->adev->dev, "read from slave 0x%x timed out\n", - dev->cli.slave_adr); + dev_err(&priv->adev->dev, "read from slave 0x%x timed out\n", + priv->cli.slave_adr); status = -ETIMEDOUT; } return status; } -static void fill_tx_fifo(struct nmk_i2c_dev *dev, int no_bytes) +static void fill_tx_fifo(struct nmk_i2c_dev *priv, int no_bytes) { int count; for (count = (no_bytes - 2); (count > 0) && - (dev->cli.count != 0); + (priv->cli.count != 0); count--) { /* write to the Tx FIFO */ - writeb(*dev->cli.buffer, - dev->virtbase + I2C_TFR); - dev->cli.buffer++; - dev->cli.count--; - dev->cli.xfer_bytes++; + writeb(*priv->cli.buffer, priv->virtbase + I2C_TFR); + priv->cli.buffer++; + priv->cli.count--; + priv->cli.xfer_bytes++; } } /** * write_i2c() - Write data to I2C client. - * @dev: private data of I2C Driver + * @priv: private data of I2C Driver * @flags: message flags * * This function writes data to I2C client */ -static int write_i2c(struct nmk_i2c_dev *dev, u16 flags) +static int write_i2c(struct nmk_i2c_dev *priv, u16 flags) { u32 status = 0; u32 mcr, irq_mask; unsigned long timeout; - mcr = load_i2c_mcr_reg(dev, flags); + mcr = load_i2c_mcr_reg(priv, flags); - writel(mcr, dev->virtbase + I2C_MCR); + writel(mcr, priv->virtbase + I2C_MCR); /* load the current CR value */ - writel(readl(dev->virtbase + I2C_CR) | DEFAULT_I2C_REG_CR, - dev->virtbase + I2C_CR); + writel(readl(priv->virtbase + I2C_CR) | DEFAULT_I2C_REG_CR, + priv->virtbase + I2C_CR); /* enable the controller */ - i2c_set_bit(dev->virtbase + I2C_CR, I2C_CR_PE); + i2c_set_bit(priv->virtbase + I2C_CR, I2C_CR_PE); - init_completion(&dev->xfer_complete); + init_completion(&priv->xfer_complete); /* enable interrupts by settings the masks */ irq_mask = (I2C_IT_TXFOVR | I2C_IT_MAL | I2C_IT_BERR); /* Fill the TX FIFO with transmit data */ - fill_tx_fifo(dev, MAX_I2C_FIFO_THRESHOLD); + fill_tx_fifo(priv, MAX_I2C_FIFO_THRESHOLD); - if (dev->cli.count != 0) + if (priv->cli.count != 0) irq_mask |= I2C_IT_TXFNE; /* @@ -543,23 +542,23 @@ static int write_i2c(struct nmk_i2c_dev *dev, u16 flags) * set the MTDWS bit (Master Transaction Done Without Stop) * to start repeated start operation */ - if (dev->stop || !dev->vendor->has_mtdws) + if (priv->stop || !priv->vendor->has_mtdws) irq_mask |= I2C_IT_MTD; else irq_mask |= I2C_IT_MTDWS; irq_mask = I2C_CLEAR_ALL_INTS & IRQ_MASK(irq_mask); - writel(readl(dev->virtbase + I2C_IMSCR) | irq_mask, - dev->virtbase + I2C_IMSCR); + writel(readl(priv->virtbase + I2C_IMSCR) | irq_mask, + priv->virtbase + I2C_IMSCR); timeout = wait_for_completion_timeout( - &dev->xfer_complete, dev->adap.timeout); + &priv->xfer_complete, priv->adap.timeout); if (timeout == 0) { /* Controller timed out */ - dev_err(&dev->adev->dev, "write to slave 0x%x timed out\n", - dev->cli.slave_adr); + dev_err(&priv->adev->dev, "write to slave 0x%x timed out\n", + priv->cli.slave_adr); status = -ETIMEDOUT; } @@ -568,28 +567,28 @@ static int write_i2c(struct nmk_i2c_dev *dev, u16 flags) /** * nmk_i2c_xfer_one() - transmit a single I2C message - * @dev: device with a message encoded into it + * @priv: device with a message encoded into it * @flags: message flags */ -static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags) +static int nmk_i2c_xfer_one(struct nmk_i2c_dev *priv, u16 flags) { int status; if (flags & I2C_M_RD) { /* read operation */ - dev->cli.operation = I2C_READ; - status = read_i2c(dev, flags); + priv->cli.operation = I2C_READ; + status = read_i2c(priv, flags); } else { /* write operation */ - dev->cli.operation = I2C_WRITE; - status = write_i2c(dev, flags); + priv->cli.operation = I2C_WRITE; + status = write_i2c(priv, flags); } - if (status || (dev->result)) { + if (status || priv->result) { u32 i2c_sr; u32 cause; - i2c_sr = readl(dev->virtbase + I2C_SR); + i2c_sr = readl(priv->virtbase + I2C_SR); /* * Check if the controller I2C operation status * is set to ABORT(11b). @@ -597,15 +596,15 @@ static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags) if (((i2c_sr >> 2) & 0x3) == 0x3) { /* get the abort cause */ cause = (i2c_sr >> 4) & 0x7; - dev_err(&dev->adev->dev, "%s\n", + dev_err(&priv->adev->dev, "%s\n", cause >= ARRAY_SIZE(abort_causes) ? "unknown reason" : abort_causes[cause]); } - (void) init_hw(dev); + init_hw(priv); - status = status ? status : dev->result; + status = status ? status : priv->result; } return status; @@ -663,24 +662,24 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap, { int status = 0; int i; - struct nmk_i2c_dev *dev = i2c_get_adapdata(i2c_adap); + struct nmk_i2c_dev *priv = i2c_get_adapdata(i2c_adap); int j; - pm_runtime_get_sync(&dev->adev->dev); + pm_runtime_get_sync(&priv->adev->dev); /* Attempt three times to send the message queue */ for (j = 0; j < 3; j++) { /* setup the i2c controller */ - setup_i2c_controller(dev); + setup_i2c_controller(priv); for (i = 0; i < num_msgs; i++) { - dev->cli.slave_adr = msgs[i].addr; - dev->cli.buffer = msgs[i].buf; - dev->cli.count = msgs[i].len; - dev->stop = (i < (num_msgs - 1)) ? 0 : 1; - dev->result = 0; + priv->cli.slave_adr = msgs[i].addr; + priv->cli.buffer = msgs[i].buf; + priv->cli.count = msgs[i].len; + priv->stop = (i < (num_msgs - 1)) ? 0 : 1; + priv->result = 0; - status = nmk_i2c_xfer_one(dev, msgs[i].flags); + status = nmk_i2c_xfer_one(priv, msgs[i].flags); if (status != 0) break; } @@ -688,7 +687,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap, break; } - pm_runtime_put_sync(&dev->adev->dev); + pm_runtime_put_sync(&priv->adev->dev); /* return the no. messages processed */ if (status) @@ -699,14 +698,14 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap, /** * disable_interrupts() - disable the interrupts - * @dev: private data of controller + * @priv: private data of controller * @irq: interrupt number */ -static int disable_interrupts(struct nmk_i2c_dev *dev, u32 irq) +static int disable_interrupts(struct nmk_i2c_dev *priv, u32 irq) { irq = IRQ_MASK(irq); - writel(readl(dev->virtbase + I2C_IMSCR) & ~(I2C_CLEAR_ALL_INTS & irq), - dev->virtbase + I2C_IMSCR); + writel(readl(priv->virtbase + I2C_IMSCR) & ~(I2C_CLEAR_ALL_INTS & irq), + priv->virtbase + I2C_IMSCR); return 0; } @@ -723,17 +722,18 @@ static int disable_interrupts(struct nmk_i2c_dev *dev, u32 irq) */ static irqreturn_t i2c_irq_handler(int irq, void *arg) { - struct nmk_i2c_dev *dev = arg; + struct nmk_i2c_dev *priv = arg; + struct device *dev = &priv->adev->dev; u32 tft, rft; u32 count; u32 misr, src; /* load Tx FIFO and Rx FIFO threshold values */ - tft = readl(dev->virtbase + I2C_TFTR); - rft = readl(dev->virtbase + I2C_RFTR); + tft = readl(priv->virtbase + I2C_TFTR); + rft = readl(priv->virtbase + I2C_RFTR); /* read interrupt status register */ - misr = readl(dev->virtbase + I2C_MISR); + misr = readl(priv->virtbase + I2C_MISR); src = __ffs(misr); switch ((1 << src)) { @@ -741,20 +741,20 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg) /* Transmit FIFO nearly empty interrupt */ case I2C_IT_TXFNE: { - if (dev->cli.operation == I2C_READ) { + if (priv->cli.operation == I2C_READ) { /* * in read operation why do we care for writing? * so disable the Transmit FIFO interrupt */ - disable_interrupts(dev, I2C_IT_TXFNE); + disable_interrupts(priv, I2C_IT_TXFNE); } else { - fill_tx_fifo(dev, (MAX_I2C_FIFO_THRESHOLD - tft)); + fill_tx_fifo(priv, (MAX_I2C_FIFO_THRESHOLD - tft)); /* * if done, close the transfer by disabling the * corresponding TXFNE interrupt */ - if (dev->cli.count == 0) - disable_interrupts(dev, I2C_IT_TXFNE); + if (priv->cli.count == 0) + disable_interrupts(priv, I2C_IT_TXFNE); } } break; @@ -768,60 +768,59 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg) case I2C_IT_RXFNF: for (count = rft; count > 0; count--) { /* Read the Rx FIFO */ - *dev->cli.buffer = readb(dev->virtbase + I2C_RFR); - dev->cli.buffer++; + *priv->cli.buffer = readb(priv->virtbase + I2C_RFR); + priv->cli.buffer++; } - dev->cli.count -= rft; - dev->cli.xfer_bytes += rft; + priv->cli.count -= rft; + priv->cli.xfer_bytes += rft; break; /* Rx FIFO full */ case I2C_IT_RXFF: for (count = MAX_I2C_FIFO_THRESHOLD; count > 0; count--) { - *dev->cli.buffer = readb(dev->virtbase + I2C_RFR); - dev->cli.buffer++; + *priv->cli.buffer = readb(priv->virtbase + I2C_RFR); + priv->cli.buffer++; } - dev->cli.count -= MAX_I2C_FIFO_THRESHOLD; - dev->cli.xfer_bytes += MAX_I2C_FIFO_THRESHOLD; + priv->cli.count -= MAX_I2C_FIFO_THRESHOLD; + priv->cli.xfer_bytes += MAX_I2C_FIFO_THRESHOLD; break; /* Master Transaction Done with/without stop */ case I2C_IT_MTD: case I2C_IT_MTDWS: - if (dev->cli.operation == I2C_READ) { - while (!(readl(dev->virtbase + I2C_RISR) + if (priv->cli.operation == I2C_READ) { + while (!(readl(priv->virtbase + I2C_RISR) & I2C_IT_RXFE)) { - if (dev->cli.count == 0) + if (priv->cli.count == 0) break; - *dev->cli.buffer = - readb(dev->virtbase + I2C_RFR); - dev->cli.buffer++; - dev->cli.count--; - dev->cli.xfer_bytes++; + *priv->cli.buffer = + readb(priv->virtbase + I2C_RFR); + priv->cli.buffer++; + priv->cli.count--; + priv->cli.xfer_bytes++; } } - disable_all_interrupts(dev); - clear_all_interrupts(dev); + disable_all_interrupts(priv); + clear_all_interrupts(priv); - if (dev->cli.count) { - dev->result = -EIO; - dev_err(&dev->adev->dev, - "%lu bytes still remain to be xfered\n", - dev->cli.count); - (void) init_hw(dev); + if (priv->cli.count) { + priv->result = -EIO; + dev_err(dev, "%lu bytes still remain to be xfered\n", + priv->cli.count); + init_hw(priv); } - complete(&dev->xfer_complete); + complete(&priv->xfer_complete); break; /* Master Arbitration lost interrupt */ case I2C_IT_MAL: - dev->result = -EIO; - (void) init_hw(dev); + priv->result = -EIO; + init_hw(priv); - i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_MAL); - complete(&dev->xfer_complete); + i2c_set_bit(priv->virtbase + I2C_ICR, I2C_IT_MAL); + complete(&priv->xfer_complete); break; @@ -831,13 +830,13 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg) * during the transaction. */ case I2C_IT_BERR: - dev->result = -EIO; + priv->result = -EIO; /* get the status */ - if (((readl(dev->virtbase + I2C_SR) >> 2) & 0x3) == I2C_ABORT) - (void) init_hw(dev); + if (((readl(priv->virtbase + I2C_SR) >> 2) & 0x3) == I2C_ABORT) + init_hw(priv); - i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_BERR); - complete(&dev->xfer_complete); + i2c_set_bit(priv->virtbase + I2C_ICR, I2C_IT_BERR); + complete(&priv->xfer_complete); break; @@ -847,11 +846,11 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg) * the Tx FIFO is full. */ case I2C_IT_TXFOVR: - dev->result = -EIO; - (void) init_hw(dev); + priv->result = -EIO; + init_hw(priv); - dev_err(&dev->adev->dev, "Tx Fifo Over run\n"); - complete(&dev->xfer_complete); + dev_err(dev, "Tx Fifo Over run\n"); + complete(&priv->xfer_complete); break; @@ -863,10 +862,10 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg) case I2C_IT_RFSE: case I2C_IT_WTSR: case I2C_IT_STD: - dev_err(&dev->adev->dev, "unhandled Interrupt\n"); + dev_err(dev, "unhandled Interrupt\n"); break; default: - dev_err(&dev->adev->dev, "spurious Interrupt..\n"); + dev_err(dev, "spurious Interrupt..\n"); break; } @@ -893,9 +892,9 @@ static int nmk_i2c_resume_early(struct device *dev) static int nmk_i2c_runtime_suspend(struct device *dev) { struct amba_device *adev = to_amba_device(dev); - struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev); + struct nmk_i2c_dev *priv = amba_get_drvdata(adev); - clk_disable_unprepare(nmk_i2c->clk); + clk_disable_unprepare(priv->clk); pinctrl_pm_select_idle_state(dev); return 0; } @@ -903,10 +902,10 @@ static int nmk_i2c_runtime_suspend(struct device *dev) static int nmk_i2c_runtime_resume(struct device *dev) { struct amba_device *adev = to_amba_device(dev); - struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev); + struct nmk_i2c_dev *priv = amba_get_drvdata(adev); int ret; - ret = clk_prepare_enable(nmk_i2c->clk); + ret = clk_prepare_enable(priv->clk); if (ret) { dev_err(dev, "can't prepare_enable clock\n"); return ret; @@ -914,9 +913,9 @@ static int nmk_i2c_runtime_resume(struct device *dev) pinctrl_pm_select_default_state(dev); - ret = init_hw(nmk_i2c); + ret = init_hw(priv); if (ret) { - clk_disable_unprepare(nmk_i2c->clk); + clk_disable_unprepare(priv->clk); pinctrl_pm_select_idle_state(dev); } @@ -939,107 +938,108 @@ static const struct i2c_algorithm nmk_i2c_algo = { }; static void nmk_i2c_of_probe(struct device_node *np, - struct nmk_i2c_dev *nmk) + struct nmk_i2c_dev *priv) { /* Default to 100 kHz if no frequency is given in the node */ - if (of_property_read_u32(np, "clock-frequency", &nmk->clk_freq)) - nmk->clk_freq = I2C_MAX_STANDARD_MODE_FREQ; + if (of_property_read_u32(np, "clock-frequency", &priv->clk_freq)) + priv->clk_freq = I2C_MAX_STANDARD_MODE_FREQ; /* This driver only supports 'standard' and 'fast' modes of operation. */ - if (nmk->clk_freq <= I2C_MAX_STANDARD_MODE_FREQ) - nmk->sm = I2C_FREQ_MODE_STANDARD; + if (priv->clk_freq <= I2C_MAX_STANDARD_MODE_FREQ) + priv->sm = I2C_FREQ_MODE_STANDARD; else - nmk->sm = I2C_FREQ_MODE_FAST; - nmk->tft = 1; /* Tx FIFO threshold */ - nmk->rft = 8; /* Rx FIFO threshold */ - nmk->timeout = 200; /* Slave response timeout(ms) */ + priv->sm = I2C_FREQ_MODE_FAST; + priv->tft = 1; /* Tx FIFO threshold */ + priv->rft = 8; /* Rx FIFO threshold */ + priv->timeout = 200; /* Slave response timeout(ms) */ } static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) { int ret = 0; + struct nmk_i2c_dev *priv; struct device_node *np = adev->dev.of_node; - struct nmk_i2c_dev *dev; + struct device *dev = &adev->dev; struct i2c_adapter *adap; struct i2c_vendor_data *vendor = id->data; u32 max_fifo_threshold = (vendor->fifodepth / 2) - 1; - dev = devm_kzalloc(&adev->dev, sizeof(*dev), GFP_KERNEL); - if (!dev) + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) return -ENOMEM; - dev->vendor = vendor; - dev->adev = adev; - nmk_i2c_of_probe(np, dev); + priv->vendor = vendor; + priv->adev = adev; + nmk_i2c_of_probe(np, priv); - if (dev->tft > max_fifo_threshold) { - dev_warn(&adev->dev, "requested TX FIFO threshold %u, adjusted down to %u\n", - dev->tft, max_fifo_threshold); - dev->tft = max_fifo_threshold; + if (priv->tft > max_fifo_threshold) { + dev_warn(dev, "requested TX FIFO threshold %u, adjusted down to %u\n", + priv->tft, max_fifo_threshold); + priv->tft = max_fifo_threshold; } - if (dev->rft > max_fifo_threshold) { - dev_warn(&adev->dev, "requested RX FIFO threshold %u, adjusted down to %u\n", - dev->rft, max_fifo_threshold); - dev->rft = max_fifo_threshold; + if (priv->rft > max_fifo_threshold) { + dev_warn(dev, "requested RX FIFO threshold %u, adjusted down to %u\n", + priv->rft, max_fifo_threshold); + priv->rft = max_fifo_threshold; } - amba_set_drvdata(adev, dev); + amba_set_drvdata(adev, priv); - dev->virtbase = devm_ioremap(&adev->dev, adev->res.start, - resource_size(&adev->res)); - if (!dev->virtbase) + priv->virtbase = devm_ioremap(dev, adev->res.start, + resource_size(&adev->res)); + if (!priv->virtbase) return -ENOMEM; - dev->irq = adev->irq[0]; - ret = devm_request_irq(&adev->dev, dev->irq, i2c_irq_handler, 0, - DRIVER_NAME, dev); + priv->irq = adev->irq[0]; + ret = devm_request_irq(dev, priv->irq, i2c_irq_handler, 0, + DRIVER_NAME, priv); if (ret) - return dev_err_probe(&adev->dev, ret, - "cannot claim the irq %d\n", dev->irq); + return dev_err_probe(dev, ret, + "cannot claim the irq %d\n", priv->irq); - dev->clk = devm_clk_get_enabled(&adev->dev, NULL); - if (IS_ERR(dev->clk)) - return dev_err_probe(&adev->dev, PTR_ERR(dev->clk), + priv->clk = devm_clk_get_enabled(dev, NULL); + if (IS_ERR(priv->clk)) + return dev_err_probe(dev, PTR_ERR(priv->clk), "could enable i2c clock\n"); - init_hw(dev); + init_hw(priv); - adap = &dev->adap; + adap = &priv->adap; adap->dev.of_node = np; - adap->dev.parent = &adev->dev; + adap->dev.parent = dev; adap->owner = THIS_MODULE; adap->class = I2C_CLASS_DEPRECATED; adap->algo = &nmk_i2c_algo; - adap->timeout = msecs_to_jiffies(dev->timeout); + adap->timeout = msecs_to_jiffies(priv->timeout); snprintf(adap->name, sizeof(adap->name), "Nomadik I2C at %pR", &adev->res); - i2c_set_adapdata(adap, dev); + i2c_set_adapdata(adap, priv); - dev_info(&adev->dev, + dev_info(dev, "initialize %s on virtual base %p\n", - adap->name, dev->virtbase); + adap->name, priv->virtbase); ret = i2c_add_adapter(adap); if (ret) return ret; - pm_runtime_put(&adev->dev); + pm_runtime_put(dev); return 0; } static void nmk_i2c_remove(struct amba_device *adev) { - struct nmk_i2c_dev *dev = amba_get_drvdata(adev); + struct nmk_i2c_dev *priv = amba_get_drvdata(adev); - i2c_del_adapter(&dev->adap); - flush_i2c_fifo(dev); - disable_all_interrupts(dev); - clear_all_interrupts(dev); + i2c_del_adapter(&priv->adap); + flush_i2c_fifo(priv); + disable_all_interrupts(priv); + clear_all_interrupts(priv); /* disable the controller */ - i2c_clr_bit(dev->virtbase + I2C_CR, I2C_CR_PE); + i2c_clr_bit(priv->virtbase + I2C_CR, I2C_CR_PE); } static struct i2c_vendor_data vendor_stn8815 = {