Message ID | 20240308144708.62362-4-arnaud.pouliquen@foss.st.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Introduction of a remoteproc tee to load signed firmware | expand |
On Fri, Mar 08, 2024 at 03:47:07PM +0100, Arnaud Pouliquen wrote: > To prepare for the support of TEE remoteproc, create sub-functions > that can be used in both cases, with and without TEE support. > > Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> > --- > drivers/remoteproc/stm32_rproc.c | 84 +++++++++++++++++++------------- > 1 file changed, 51 insertions(+), 33 deletions(-) > > diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c > index 88623df7d0c3..8cd838df4e92 100644 > --- a/drivers/remoteproc/stm32_rproc.c > +++ b/drivers/remoteproc/stm32_rproc.c > @@ -209,6 +209,54 @@ static int stm32_rproc_mbox_idx(struct rproc *rproc, const unsigned char *name) > return -EINVAL; > } > > +static void stm32_rproc_request_shutdown(struct rproc *rproc) > +{ > + struct stm32_rproc *ddata = rproc->priv; > + int err, dummy_data, idx; > + > + /* Request shutdown of the remote processor */ > + if (rproc->state != RPROC_OFFLINE && rproc->state != RPROC_CRASHED) { > + idx = stm32_rproc_mbox_idx(rproc, STM32_MBX_SHUTDOWN); > + if (idx >= 0 && ddata->mb[idx].chan) { > + /* A dummy data is sent to allow to block on transmit. */ > + err = mbox_send_message(ddata->mb[idx].chan, > + &dummy_data); Why is this changed from the original implementation? > + if (err < 0) > + dev_warn(&rproc->dev, "warning: remote FW shutdown without ack\n"); > + } > + } > +} > + > +static int stm32_rproc_release(struct rproc *rproc) > +{ > + struct stm32_rproc *ddata = rproc->priv; > + unsigned int err = 0; > + > + /* To allow platform Standby power mode, set remote proc Deep Sleep. */ > + if (ddata->pdds.map) { > + err = regmap_update_bits(ddata->pdds.map, ddata->pdds.reg, > + ddata->pdds.mask, 1); > + if (err) { > + dev_err(&rproc->dev, "failed to set pdds\n"); > + return err; > + } > + } > + > + /* Update coprocessor state to OFF if available. */ > + if (ddata->m4_state.map) { > + err = regmap_update_bits(ddata->m4_state.map, > + ddata->m4_state.reg, > + ddata->m4_state.mask, > + M4_STATE_OFF); > + if (err) { > + dev_err(&rproc->dev, "failed to set copro state\n"); > + return err; > + } > + } > + > + return 0; > +} > + > static int stm32_rproc_prepare(struct rproc *rproc) > { > struct device *dev = rproc->dev.parent; > @@ -519,17 +567,9 @@ static int stm32_rproc_detach(struct rproc *rproc) > static int stm32_rproc_stop(struct rproc *rproc) > { > struct stm32_rproc *ddata = rproc->priv; > - int err, idx; > + int err; > > - /* request shutdown of the remote processor */ > - if (rproc->state != RPROC_OFFLINE && rproc->state != RPROC_CRASHED) { > - idx = stm32_rproc_mbox_idx(rproc, STM32_MBX_SHUTDOWN); > - if (idx >= 0 && ddata->mb[idx].chan) { > - err = mbox_send_message(ddata->mb[idx].chan, "detach"); > - if (err < 0) > - dev_warn(&rproc->dev, "warning: remote FW shutdown without ack\n"); > - } > - } > + stm32_rproc_request_shutdown(rproc); > > err = stm32_rproc_set_hold_boot(rproc, true); > if (err) > @@ -541,29 +581,7 @@ static int stm32_rproc_stop(struct rproc *rproc) > return err; > } > > - /* to allow platform Standby power mode, set remote proc Deep Sleep */ > - if (ddata->pdds.map) { > - err = regmap_update_bits(ddata->pdds.map, ddata->pdds.reg, > - ddata->pdds.mask, 1); > - if (err) { > - dev_err(&rproc->dev, "failed to set pdds\n"); > - return err; > - } > - } > - > - /* update coprocessor state to OFF if available */ > - if (ddata->m4_state.map) { > - err = regmap_update_bits(ddata->m4_state.map, > - ddata->m4_state.reg, > - ddata->m4_state.mask, > - M4_STATE_OFF); > - if (err) { > - dev_err(&rproc->dev, "failed to set copro state\n"); > - return err; > - } > - } > - > - return 0; > + return stm32_rproc_release(rproc); > } > > static void stm32_rproc_kick(struct rproc *rproc, int vqid) > -- > 2.25.1 >
diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c index 88623df7d0c3..8cd838df4e92 100644 --- a/drivers/remoteproc/stm32_rproc.c +++ b/drivers/remoteproc/stm32_rproc.c @@ -209,6 +209,54 @@ static int stm32_rproc_mbox_idx(struct rproc *rproc, const unsigned char *name) return -EINVAL; } +static void stm32_rproc_request_shutdown(struct rproc *rproc) +{ + struct stm32_rproc *ddata = rproc->priv; + int err, dummy_data, idx; + + /* Request shutdown of the remote processor */ + if (rproc->state != RPROC_OFFLINE && rproc->state != RPROC_CRASHED) { + idx = stm32_rproc_mbox_idx(rproc, STM32_MBX_SHUTDOWN); + if (idx >= 0 && ddata->mb[idx].chan) { + /* A dummy data is sent to allow to block on transmit. */ + err = mbox_send_message(ddata->mb[idx].chan, + &dummy_data); + if (err < 0) + dev_warn(&rproc->dev, "warning: remote FW shutdown without ack\n"); + } + } +} + +static int stm32_rproc_release(struct rproc *rproc) +{ + struct stm32_rproc *ddata = rproc->priv; + unsigned int err = 0; + + /* To allow platform Standby power mode, set remote proc Deep Sleep. */ + if (ddata->pdds.map) { + err = regmap_update_bits(ddata->pdds.map, ddata->pdds.reg, + ddata->pdds.mask, 1); + if (err) { + dev_err(&rproc->dev, "failed to set pdds\n"); + return err; + } + } + + /* Update coprocessor state to OFF if available. */ + if (ddata->m4_state.map) { + err = regmap_update_bits(ddata->m4_state.map, + ddata->m4_state.reg, + ddata->m4_state.mask, + M4_STATE_OFF); + if (err) { + dev_err(&rproc->dev, "failed to set copro state\n"); + return err; + } + } + + return 0; +} + static int stm32_rproc_prepare(struct rproc *rproc) { struct device *dev = rproc->dev.parent; @@ -519,17 +567,9 @@ static int stm32_rproc_detach(struct rproc *rproc) static int stm32_rproc_stop(struct rproc *rproc) { struct stm32_rproc *ddata = rproc->priv; - int err, idx; + int err; - /* request shutdown of the remote processor */ - if (rproc->state != RPROC_OFFLINE && rproc->state != RPROC_CRASHED) { - idx = stm32_rproc_mbox_idx(rproc, STM32_MBX_SHUTDOWN); - if (idx >= 0 && ddata->mb[idx].chan) { - err = mbox_send_message(ddata->mb[idx].chan, "detach"); - if (err < 0) - dev_warn(&rproc->dev, "warning: remote FW shutdown without ack\n"); - } - } + stm32_rproc_request_shutdown(rproc); err = stm32_rproc_set_hold_boot(rproc, true); if (err) @@ -541,29 +581,7 @@ static int stm32_rproc_stop(struct rproc *rproc) return err; } - /* to allow platform Standby power mode, set remote proc Deep Sleep */ - if (ddata->pdds.map) { - err = regmap_update_bits(ddata->pdds.map, ddata->pdds.reg, - ddata->pdds.mask, 1); - if (err) { - dev_err(&rproc->dev, "failed to set pdds\n"); - return err; - } - } - - /* update coprocessor state to OFF if available */ - if (ddata->m4_state.map) { - err = regmap_update_bits(ddata->m4_state.map, - ddata->m4_state.reg, - ddata->m4_state.mask, - M4_STATE_OFF); - if (err) { - dev_err(&rproc->dev, "failed to set copro state\n"); - return err; - } - } - - return 0; + return stm32_rproc_release(rproc); } static void stm32_rproc_kick(struct rproc *rproc, int vqid)
To prepare for the support of TEE remoteproc, create sub-functions that can be used in both cases, with and without TEE support. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> --- drivers/remoteproc/stm32_rproc.c | 84 +++++++++++++++++++------------- 1 file changed, 51 insertions(+), 33 deletions(-)