| Message ID | 20240311-drm-imx-cleanup-v1-1-e104f05caa51@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/imx/ipuv3: switch LDB and parallel-display driver to use drm_bridge_connector | expand |
On Mon, 11 Mar 2024 13:20:09 +0200, Dmitry Baryshkov wrote: > None of the in-kernel DT files ever used edid override with the > fsl-imx-drm driver. In case the EDID needs to be specified manually, DRM > core allows one to either override it via the debugfs or to load it via > request_firmware by using DRM_LOAD_EDID_FIRMWARE. In all other cases > EDID and/or modes are to be provided as a part of the panel driver. > > Drop the edid property from the fsl-imx-drm bindings. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt | 2 -- > 1 file changed, 2 deletions(-) > Acked-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt index 3c35338a2867..269b1ae2fca9 100644 --- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt +++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt @@ -119,7 +119,6 @@ Optional properties: - interface-pix-fmt: How this display is connected to the display interface. Currently supported types: "rgb24", "rgb565", "bgr666" and "lvds666". -- edid: verbatim EDID data block describing attached display. - ddc: phandle describing the i2c bus handling the display data channel - port@[0-1]: Port nodes with endpoint definitions as defined in @@ -131,7 +130,6 @@ example: disp0 { compatible = "fsl,imx-parallel-display"; - edid = [edid-data]; interface-pix-fmt = "rgb24"; port@0 {
None of the in-kernel DT files ever used edid override with the fsl-imx-drm driver. In case the EDID needs to be specified manually, DRM core allows one to either override it via the debugfs or to load it via request_firmware by using DRM_LOAD_EDID_FIRMWARE. In all other cases EDID and/or modes are to be provided as a part of the panel driver. Drop the edid property from the fsl-imx-drm bindings. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt | 2 -- 1 file changed, 2 deletions(-)