@@ -10,7 +10,7 @@
* The P2WI controller looks like an SMBus controller which only supports byte
* data transfers. But, it differs from standard SMBus protocol on several
* aspects:
- * - it supports only one slave device, and thus drop the address field
+ * - it supports only one client device, and thus drop the address field
* - it adds a parity bit every 8bits of data
* - only one read access is required to read a byte (instead of a write
* followed by a read access in standard SMBus protocol)
@@ -88,7 +88,7 @@ struct p2wi {
void __iomem *regs;
struct clk *clk;
struct reset_control *rstc;
- int slave_addr;
+ int client_addr;
};
static irqreturn_t p2wi_interrupt(int irq, void *dev_id)
@@ -121,7 +121,7 @@ static int p2wi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
struct p2wi *p2wi = i2c_get_adapdata(adap);
unsigned long dlen = P2WI_DLEN_DATA_LENGTH(1);
- if (p2wi->slave_addr >= 0 && addr != p2wi->slave_addr) {
+ if (p2wi->client_addr >= 0 && addr != p2wi->client_addr) {
dev_err(&adap->dev, "invalid P2WI address\n");
return -EINVAL;
}
@@ -188,7 +188,7 @@ static int p2wi_probe(struct platform_device *pdev)
unsigned long parent_clk_freq;
u32 clk_freq = I2C_MAX_STANDARD_MODE_FREQ;
struct p2wi *p2wi;
- u32 slave_addr;
+ u32 client_addr;
int clk_div;
int irq;
int ret;
@@ -207,7 +207,7 @@ static int p2wi_probe(struct platform_device *pdev)
}
if (of_get_child_count(np) > 1) {
- dev_err(dev, "P2WI only supports one slave device\n");
+ dev_err(dev, "P2WI only supports one client device\n");
return -EINVAL;
}
@@ -215,24 +215,24 @@ static int p2wi_probe(struct platform_device *pdev)
if (!p2wi)
return -ENOMEM;
- p2wi->slave_addr = -1;
+ p2wi->client_addr = -1;
/*
* Authorize a p2wi node without any children to be able to use an
* i2c-dev from userpace.
- * In this case the slave_addr is set to -1 and won't be checked when
+ * In this case the client_addr is set to -1 and won't be checked when
* launching a P2WI transfer.
*/
childnp = of_get_next_available_child(np, NULL);
if (childnp) {
- ret = of_property_read_u32(childnp, "reg", &slave_addr);
+ ret = of_property_read_u32(childnp, "reg", &client_addr);
if (ret) {
- dev_err(dev, "invalid slave address on node %pOF\n",
+ dev_err(dev, "invalid client address on node %pOF\n",
childnp);
return -EINVAL;
}
- p2wi->slave_addr = slave_addr;
+ p2wi->client_addr = client_addr;
}
p2wi->regs = devm_platform_ioremap_resource(pdev, 0);
Match the wording of this driver wrt. the newest I2C v7, SMBus 3.2, I3C specifications and replace "master/slave" with more appropriate terms. They are also more specific because we distinguish now between a remote entity ("client") and a local one ("target"). Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> --- drivers/i2c/busses/i2c-sun6i-p2wi.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)