diff mbox series

[v2,07/12] drm/imx: ldb: switch to drm_panel_bridge

Message ID 20240331-drm-imx-cleanup-v2-7-d81c1d1c1026@linaro.org (mailing list archive)
State New, archived
Headers show
Series drm/imx/ipuv3: switch LDB and parallel-display driver to use drm_bridge_connector | expand

Commit Message

Dmitry Baryshkov March 31, 2024, 8:29 p.m. UTC
Defer panel handling to drm_panel_bridge, unifying codepaths for the
panel and bridge cases.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/imx/ipuv3/Kconfig   |  2 ++
 drivers/gpu/drm/imx/ipuv3/imx-ldb.c | 44 ++++++++++++-------------------------
 2 files changed, 16 insertions(+), 30 deletions(-)

Comments

Philipp Zabel May 29, 2024, 2:58 p.m. UTC | #1
On So, 2024-03-31 at 23:29 +0300, Dmitry Baryshkov wrote:
> Defer panel handling to drm_panel_bridge, unifying codepaths for the
> panel and bridge cases.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  drivers/gpu/drm/imx/ipuv3/Kconfig   |  2 ++
>  drivers/gpu/drm/imx/ipuv3/imx-ldb.c | 44 ++++++++++++-------------------------
>  2 files changed, 16 insertions(+), 30 deletions(-)
> 
> diff --git a/drivers/gpu/drm/imx/ipuv3/Kconfig b/drivers/gpu/drm/imx/ipuv3/Kconfig
> index bacf0655ebaf..4e41611c8532 100644
> --- a/drivers/gpu/drm/imx/ipuv3/Kconfig
> +++ b/drivers/gpu/drm/imx/ipuv3/Kconfig
> @@ -28,7 +28,9 @@ config DRM_IMX_LDB
>  	tristate "Support for LVDS displays"
>  	depends on DRM_IMX && MFD_SYSCON
>  	depends on COMMON_CLK
> +	depends on DRM_BRIDGE

To avoid hiding the DRM_IMX_LDB option for legacy configurations with
DRM_BRIDGE disabled, it would be better to select DRM_BRIDGE here
instead.

>  	select DRM_PANEL

And this shouldn't be necessary anymore.

regards
Philipp
diff mbox series

Patch

diff --git a/drivers/gpu/drm/imx/ipuv3/Kconfig b/drivers/gpu/drm/imx/ipuv3/Kconfig
index bacf0655ebaf..4e41611c8532 100644
--- a/drivers/gpu/drm/imx/ipuv3/Kconfig
+++ b/drivers/gpu/drm/imx/ipuv3/Kconfig
@@ -28,7 +28,9 @@  config DRM_IMX_LDB
 	tristate "Support for LVDS displays"
 	depends on DRM_IMX && MFD_SYSCON
 	depends on COMMON_CLK
+	depends on DRM_BRIDGE
 	select DRM_PANEL
+	select DRM_PANEL_BRIDGE
 	help
 	  Choose this to enable the internal LVDS Display Bridge (LDB)
 	  found on i.MX53 and i.MX6 processors.
diff --git a/drivers/gpu/drm/imx/ipuv3/imx-ldb.c b/drivers/gpu/drm/imx/ipuv3/imx-ldb.c
index 380edc1c4507..74b41a507219 100644
--- a/drivers/gpu/drm/imx/ipuv3/imx-ldb.c
+++ b/drivers/gpu/drm/imx/ipuv3/imx-ldb.c
@@ -28,7 +28,6 @@ 
 #include <drm/drm_edid.h>
 #include <drm/drm_managed.h>
 #include <drm/drm_of.h>
-#include <drm/drm_panel.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_simple_kms_helper.h>
@@ -65,8 +64,6 @@  struct imx_ldb;
 struct imx_ldb_channel {
 	struct imx_ldb *ldb;
 
-	/* Defines what is connected to the ldb, only one at a time */
-	struct drm_panel *panel;
 	struct drm_bridge *bridge;
 
 	struct device_node *child;
@@ -136,10 +133,6 @@  static int imx_ldb_connector_get_modes(struct drm_connector *connector)
 	struct imx_ldb_channel *imx_ldb_ch = con_to_imx_ldb_ch(connector);
 	int num_modes;
 
-	num_modes = drm_panel_get_modes(imx_ldb_ch->panel, connector);
-	if (num_modes > 0)
-		return num_modes;
-
 	if (imx_ldb_ch->mode_valid) {
 		struct drm_display_mode *mode;
 
@@ -194,8 +187,6 @@  static void imx_ldb_encoder_enable(struct drm_encoder *encoder)
 		return;
 	}
 
-	drm_panel_prepare(imx_ldb_ch->panel);
-
 	if (dual) {
 		clk_set_parent(ldb->clk_sel[mux], ldb->clk[0]);
 		clk_set_parent(ldb->clk_sel[mux], ldb->clk[1]);
@@ -234,8 +225,6 @@  static void imx_ldb_encoder_enable(struct drm_encoder *encoder)
 	}
 
 	regmap_write(ldb->regmap, IOMUXC_GPR2, ldb->ldb_ctrl);
-
-	drm_panel_enable(imx_ldb_ch->panel);
 }
 
 static void
@@ -312,8 +301,6 @@  static void imx_ldb_encoder_disable(struct drm_encoder *encoder)
 	int dual = ldb->ldb_ctrl & LDB_SPLIT_MODE_EN;
 	int mux, ret;
 
-	drm_panel_disable(imx_ldb_ch->panel);
-
 	if (imx_ldb_ch == &ldb->channel[0] || dual)
 		ldb->ldb_ctrl &= ~LDB_CH0_MODE_EN_MASK;
 	if (imx_ldb_ch == &ldb->channel[1] || dual)
@@ -347,8 +334,6 @@  static void imx_ldb_encoder_disable(struct drm_encoder *encoder)
 		dev_err(ldb->dev,
 			"unable to set di%d parent clock to original parent\n",
 			mux);
-
-	drm_panel_unprepare(imx_ldb_ch->panel);
 }
 
 static int imx_ldb_encoder_atomic_check(struct drm_encoder *encoder,
@@ -641,13 +626,15 @@  static int imx_ldb_probe(struct platform_device *pdev)
 		 * The output port is port@4 with an external 4-port mux or
 		 * port@2 with the internal 2-port mux.
 		 */
-		ret = drm_of_find_panel_or_bridge(child,
-						  imx_ldb->lvds_mux ? 4 : 2, 0,
-						  &channel->panel, &channel->bridge);
-		if (ret && ret != -ENODEV)
-			goto free_child;
+		channel->bridge = devm_drm_of_get_bridge(dev, child,
+						imx_ldb->lvds_mux ? 4 : 2, 0);
+		if (IS_ERR(channel->bridge)) {
+			ret = PTR_ERR(channel->bridge);
+			if (ret != -ENODEV)
+				goto free_child;
+
+			channel->bridge = NULL;
 
-		if (!channel->bridge && !channel->panel) {
 			ret = of_get_drm_display_mode(child,
 						      &channel->mode,
 						      &channel->bus_flags,
@@ -659,15 +646,12 @@  static int imx_ldb_probe(struct platform_device *pdev)
 		}
 
 		bus_format = of_get_bus_format(dev, child);
-		if (bus_format == -EINVAL) {
-			/*
-			 * If no bus format was specified in the device tree,
-			 * we can still get it from the connected panel later.
-			 */
-			if (channel->panel && channel->panel->funcs &&
-			    channel->panel->funcs->get_modes)
-				bus_format = 0;
-		}
+		/*
+		 * If no bus format was specified in the device tree,
+		 * we can still get it from the connected panel later.
+		 */
+		if (bus_format == -EINVAL && channel->bridge)
+			bus_format = 0;
 		if (bus_format < 0) {
 			dev_err(dev, "could not determine data mapping: %d\n",
 				bus_format);