| Message ID | 20240415-rzn1-gmac1-v3-4-ab12f2c4401d@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | net: stmmac: Add support for RZN1 GMAC devices | expand |
On Mon, Apr 15, 2024 at 11:18:44AM +0200, Romain Gantois wrote: > [...] > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c > new file mode 100644 > index 0000000000000..e85524c2017cf > --- /dev/null > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c > @@ -0,0 +1,88 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * Copyright (C) 2024 Schneider-Electric > + * > + * Clément Léger <clement.leger@bootlin.com> > + */ > + > +#include <linux/of.h> > +#include <linux/pcs-rzn1-miic.h> > +#include <linux/phylink.h> > +#include <linux/platform_device.h> > + > +#include "stmmac_platform.h" > +#include "stmmac.h" > + > +static int rzn1_dwmac_pcs_init(struct stmmac_priv *priv, > + struct mac_device_info *hw) AFAICS hw is unused, and the mac_device_info instance is reached via the priv pointer. What about dropping the unused argument then? > +{ > + struct device_node *np = priv->device->of_node; > + struct device_node *pcs_node; > + struct phylink_pcs *pcs; > + > + pcs_node = of_parse_phandle(np, "pcs-handle", 0); > + > + if (pcs_node) { > + pcs = miic_create(priv->device, pcs_node); > + of_node_put(pcs_node); > + if (IS_ERR(pcs)) > + return PTR_ERR(pcs); > + > + priv->hw->phylink_pcs = pcs; > + } > + > + return 0; > +} > + > +static void rzn1_dwmac_pcs_exit(struct stmmac_priv *priv, > + struct mac_device_info *hw) ditto. -Serge(y) > +{ > + if (priv->hw->phylink_pcs) > + miic_destroy(priv->hw->phylink_pcs); > +} > + > [...]
Hi Serge, On Tue, 16 Apr 2024, Serge Semin wrote: > > +static int rzn1_dwmac_pcs_init(struct stmmac_priv *priv, > > > + struct mac_device_info *hw) > > AFAICS hw is unused, and the mac_device_info instance is reached via > the priv pointer. What about dropping the unused argument then? Unfortunately, this is an implementation of the pcs_init() callback, which is also used by socfpga (see patch 4/6 in this series). The socfpga implementations use the hw parameter for both pcs_init() and pcs_exit() so I can't remove it. Thanks,
On Thu, Apr 18, 2024 at 01:57:47PM +0200, Romain Gantois wrote: > Hi Serge, > > On Tue, 16 Apr 2024, Serge Semin wrote: > > > > +static int rzn1_dwmac_pcs_init(struct stmmac_priv *priv, > > > > > + struct mac_device_info *hw) > > > > AFAICS hw is unused, and the mac_device_info instance is reached via > > the priv pointer. What about dropping the unused argument then? > > Unfortunately, this is an implementation of the pcs_init() callback, which is > also used by socfpga (see patch 4/6 in this series). The socfpga implementations > use the hw parameter for both pcs_init() and pcs_exit() so I can't remove it. I had that patch content in mind when was writing my comment. There is no point in passing the hw-pointer there either because you already have the stmmac_priv pointer. There is stmmac_priv::hw field which you can use instead in the same way as you do in this patch. Here is the respective change for your SoCFPGA patch: +static int socfpga_dwmac_pcs_init(struct stmmac_priv *priv, + struct mac_device_info *hw) +{ ... + + priv->hw->phylink_pcs = pcs; + return 0; +} + +static void socfpga_dwmac_pcs_exit(struct stmmac_priv *priv, + struct mac_device_info *hw) +{ + if (priv->hw->phylink_pcs) + lynx_pcs_destroy(priv->hw->phylink_pcs); +} -Serge(y) > > Thanks, > > -- > Romain Gantois, Bootlin > Embedded Linux and Kernel engineering > https://bootlin.com
On Thu, 18 Apr 2024, Serge Semin wrote: > On Thu, Apr 18, 2024 at 01:57:47PM +0200, Romain Gantois wrote: > > Hi Serge, > > > > On Tue, 16 Apr 2024, Serge Semin wrote: > > > > > > +static int rzn1_dwmac_pcs_init(struct stmmac_priv *priv, > > > > > > > + struct mac_device_info *hw) > > > > > > AFAICS hw is unused, and the mac_device_info instance is reached via > > > the priv pointer. What about dropping the unused argument then? > > > > > Unfortunately, this is an implementation of the pcs_init() callback, which is > > also used by socfpga (see patch 4/6 in this series). The socfpga implementations > > use the hw parameter for both pcs_init() and pcs_exit() so I can't remove it. > > I had that patch content in mind when was writing my comment. There is > no point in passing the hw-pointer there either because you already > have the stmmac_priv pointer. There is stmmac_priv::hw field which you > can use instead in the same way as you do in this patch. Here is the > respective change for your SoCFPGA patch: > You're right, I'll remove the parameter. Thanks,
diff --git a/MAINTAINERS b/MAINTAINERS index 5ba3fe6ac09ce..20f92241e0058 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18845,6 +18845,12 @@ F: include/dt-bindings/net/pcs-rzn1-miic.h F: include/linux/pcs-rzn1-miic.h F: net/dsa/tag_rzn1_a5psw.c +RENESAS RZ/N1 DWMAC GLUE LAYER +M: Romain Gantois <romain.gantois@bootlin.com> +S: Maintained +F: Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml +F: drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c + RENESAS RZ/N1 RTC CONTROLLER DRIVER M: Miquel Raynal <miquel.raynal@bootlin.com> L: linux-rtc@vger.kernel.org diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index 4ec61f1ee71a2..05cc07b8f48c0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -142,6 +142,18 @@ config DWMAC_ROCKCHIP This selects the Rockchip RK3288 SoC glue layer support for the stmmac device driver. +config DWMAC_RZN1 + tristate "Renesas RZ/N1 dwmac support" + default ARCH_RZN1 + depends on OF && (ARCH_RZN1 || COMPILE_TEST) + select PCS_RZN1_MIIC + help + Support for Ethernet controller on Renesas RZ/N1 SoC family. + + This selects the Renesas RZ/N1 SoC glue layer support for + the stmmac device driver. This support can make use of a custom MII + converter PCS device. + config DWMAC_SOCFPGA tristate "SOCFPGA dwmac support" default ARCH_INTEL_SOCFPGA diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile index 26cad4344701e..c2f0e91f6bf83 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Makefile +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_DWMAC_MEDIATEK) += dwmac-mediatek.o obj-$(CONFIG_DWMAC_MESON) += dwmac-meson.o dwmac-meson8b.o obj-$(CONFIG_DWMAC_QCOM_ETHQOS) += dwmac-qcom-ethqos.o obj-$(CONFIG_DWMAC_ROCKCHIP) += dwmac-rk.o +obj-$(CONFIG_DWMAC_RZN1) += dwmac-rzn1.o obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-altr-socfpga.o obj-$(CONFIG_DWMAC_STARFIVE) += dwmac-starfive.o obj-$(CONFIG_DWMAC_STI) += dwmac-sti.o diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c new file mode 100644 index 0000000000000..e85524c2017cf --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2024 Schneider-Electric + * + * Clément Léger <clement.leger@bootlin.com> + */ + +#include <linux/of.h> +#include <linux/pcs-rzn1-miic.h> +#include <linux/phylink.h> +#include <linux/platform_device.h> + +#include "stmmac_platform.h" +#include "stmmac.h" + +static int rzn1_dwmac_pcs_init(struct stmmac_priv *priv, + struct mac_device_info *hw) +{ + struct device_node *np = priv->device->of_node; + struct device_node *pcs_node; + struct phylink_pcs *pcs; + + pcs_node = of_parse_phandle(np, "pcs-handle", 0); + + if (pcs_node) { + pcs = miic_create(priv->device, pcs_node); + of_node_put(pcs_node); + if (IS_ERR(pcs)) + return PTR_ERR(pcs); + + priv->hw->phylink_pcs = pcs; + } + + return 0; +} + +static void rzn1_dwmac_pcs_exit(struct stmmac_priv *priv, + struct mac_device_info *hw) +{ + if (priv->hw->phylink_pcs) + miic_destroy(priv->hw->phylink_pcs); +} + +static int rzn1_dwmac_probe(struct platform_device *pdev) +{ + struct plat_stmmacenet_data *plat_dat; + struct stmmac_resources stmmac_res; + struct device *dev = &pdev->dev; + int ret; + + ret = stmmac_get_platform_resources(pdev, &stmmac_res); + if (ret) + return ret; + + plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + + plat_dat->bsp_priv = plat_dat; + plat_dat->pcs_init = rzn1_dwmac_pcs_init; + plat_dat->pcs_exit = rzn1_dwmac_pcs_exit; + + ret = stmmac_dvr_probe(dev, plat_dat, &stmmac_res); + if (ret) + return ret; + + return 0; +} + +static const struct of_device_id rzn1_dwmac_match[] = { + { .compatible = "renesas,rzn1-gmac" }, + { } +}; +MODULE_DEVICE_TABLE(of, rzn1_dwmac_match); + +static struct platform_driver rzn1_dwmac_driver = { + .probe = rzn1_dwmac_probe, + .remove_new = stmmac_pltfr_remove, + .driver = { + .name = "rzn1-dwmac", + .of_match_table = rzn1_dwmac_match, + }, +}; +module_platform_driver(rzn1_dwmac_driver); + +MODULE_AUTHOR("Clément Léger <clement.leger@bootlin.com>"); +MODULE_DESCRIPTION("Renesas RZN1 DWMAC specific glue layer"); +MODULE_LICENSE("GPL");