diff mbox series

[v2,2/2] arm64: dts: ti: k3-am69-sk: Fix UART pin type and macro type

Message ID 20240415095605.3547933-3-u-kumar1@ti.com (mailing list archive)
State New, archived
Headers show
Series Fix UART pin type and macro type | expand

Commit Message

Kumar, Udit April 15, 2024, 9:56 a.m. UTC 
Along fixing wkup UART RTS and TX pins as OUTPUT instead of INPUT
updating J784S4 macro for pin mux instead of J721S2.

Fixes: 45299dd1991b ("arm64: dts: ti: k3-am69-sk: Add mcu and wakeup uarts")
Fixes: 08ae12b63750 ("arm64: dts: ti: k3-am69-sk: Enable wakeup_i2c0 and eeprom")
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am69-sk.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Comments

Francesco Dolcini April 15, 2024, 11:03 a.m. UTC | #1 
On Mon, Apr 15, 2024 at 03:26:05PM +0530, Udit Kumar wrote:
> Along fixing wkup UART RTS and TX pins as OUTPUT instead of INPUT
> updating J784S4 macro for pin mux instead of J721S2.
> 
> Fixes: 45299dd1991b ("arm64: dts: ti: k3-am69-sk: Add mcu and wakeup uarts")
> Fixes: 08ae12b63750 ("arm64: dts: ti: k3-am69-sk: Enable wakeup_i2c0 and eeprom")
> Signed-off-by: Udit Kumar <u-kumar1@ti.com>

Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index 50de2a448a3a..d88651c297a2 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -517,18 +517,18 @@  J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 7)
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
-			J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */
-			J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */
-			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
-			J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */
+			J784S4_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_UART0_CTSn */
+			J784S4_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (L36) WKUP_UART0_RTSn */
+			J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
+			J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */
 		>;
 	};
 
 	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
-			J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
-			J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
+			J784S4_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
+			J784S4_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
 		>;
 	};