@@ -57,18 +57,20 @@
/*
* cpu_arm1020_proc_init()
*/
-ENTRY(cpu_arm1020_proc_init)
+SYM_TYPED_FUNC_START(cpu_arm1020_proc_init)
ret lr
+SYM_FUNC_END(cpu_arm1020_proc_init)
/*
* cpu_arm1020_proc_fin()
*/
-ENTRY(cpu_arm1020_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm1020_proc_fin)
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x000e @ ............wca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
+SYM_FUNC_END(cpu_arm1020_proc_fin)
/*
* cpu_arm1020_reset(loc)
@@ -81,7 +83,7 @@ ENTRY(cpu_arm1020_proc_fin)
*/
.align 5
.pushsection .idmap.text, "ax"
-ENTRY(cpu_arm1020_reset)
+SYM_TYPED_FUNC_START(cpu_arm1020_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
@@ -93,16 +95,17 @@ ENTRY(cpu_arm1020_reset)
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
ret r0
-ENDPROC(cpu_arm1020_reset)
+SYM_FUNC_END(cpu_arm1020_reset)
.popsection
/*
* cpu_arm1020_do_idle()
*/
.align 5
-ENTRY(cpu_arm1020_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm1020_do_idle)
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
ret lr
+SYM_FUNC_END(cpu_arm1020_do_idle)
/* ================================= CACHE ================================ */
@@ -358,7 +361,7 @@ SYM_TYPED_FUNC_START(arm1020_dma_unmap_area)
SYM_FUNC_END(arm1020_dma_unmap_area)
.align 5
-ENTRY(cpu_arm1020_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_arm1020_dcache_clean_area)
#ifndef CONFIG_CPU_DCACHE_DISABLE
mov ip, #0
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -368,6 +371,7 @@ ENTRY(cpu_arm1020_dcache_clean_area)
bhi 1b
#endif
ret lr
+SYM_FUNC_END(cpu_arm1020_dcache_clean_area)
/* =============================== PageTable ============================== */
@@ -379,7 +383,7 @@ ENTRY(cpu_arm1020_dcache_clean_area)
* pgd: new page tables
*/
.align 5
-ENTRY(cpu_arm1020_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm1020_switch_mm)
#ifdef CONFIG_MMU
#ifndef CONFIG_CPU_DCACHE_DISABLE
mcr p15, 0, r3, c7, c10, 4
@@ -407,14 +411,15 @@ ENTRY(cpu_arm1020_switch_mm)
mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
#endif /* CONFIG_MMU */
ret lr
-
+SYM_FUNC_END(cpu_arm1020_switch_mm)
+
/*
* cpu_arm1020_set_pte(ptep, pte)
*
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_arm1020_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_arm1020_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext
mov r0, r0
@@ -425,6 +430,7 @@ ENTRY(cpu_arm1020_set_pte_ext)
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif /* CONFIG_MMU */
ret lr
+SYM_FUNC_END(cpu_arm1020_set_pte_ext)
.type __arm1020_setup, #function
__arm1020_setup:
@@ -57,18 +57,20 @@
/*
* cpu_arm1020e_proc_init()
*/
-ENTRY(cpu_arm1020e_proc_init)
+SYM_TYPED_FUNC_START(cpu_arm1020e_proc_init)
ret lr
+SYM_FUNC_END(cpu_arm1020e_proc_init)
/*
* cpu_arm1020e_proc_fin()
*/
-ENTRY(cpu_arm1020e_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm1020e_proc_fin)
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x000e @ ............wca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
+SYM_FUNC_END(cpu_arm1020e_proc_fin)
/*
* cpu_arm1020e_reset(loc)
@@ -81,7 +83,7 @@ ENTRY(cpu_arm1020e_proc_fin)
*/
.align 5
.pushsection .idmap.text, "ax"
-ENTRY(cpu_arm1020e_reset)
+SYM_TYPED_FUNC_START(cpu_arm1020e_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
@@ -93,16 +95,17 @@ ENTRY(cpu_arm1020e_reset)
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
ret r0
-ENDPROC(cpu_arm1020e_reset)
+SYM_FUNC_END(cpu_arm1020e_reset)
.popsection
/*
* cpu_arm1020e_do_idle()
*/
.align 5
-ENTRY(cpu_arm1020e_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm1020e_do_idle)
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
ret lr
+SYM_FUNC_END(cpu_arm1020e_do_idle)
/* ================================= CACHE ================================ */
@@ -345,7 +348,7 @@ SYM_TYPED_FUNC_START(arm1020e_dma_unmap_area)
SYM_FUNC_END(arm1020e_dma_unmap_area)
.align 5
-ENTRY(cpu_arm1020e_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_arm1020e_dcache_clean_area)
#ifndef CONFIG_CPU_DCACHE_DISABLE
mov ip, #0
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -354,6 +357,7 @@ ENTRY(cpu_arm1020e_dcache_clean_area)
bhi 1b
#endif
ret lr
+SYM_FUNC_END(cpu_arm1020e_dcache_clean_area)
/* =============================== PageTable ============================== */
@@ -365,7 +369,7 @@ ENTRY(cpu_arm1020e_dcache_clean_area)
* pgd: new page tables
*/
.align 5
-ENTRY(cpu_arm1020e_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm1020e_switch_mm)
#ifdef CONFIG_MMU
#ifndef CONFIG_CPU_DCACHE_DISABLE
mcr p15, 0, r3, c7, c10, 4
@@ -392,14 +396,15 @@ ENTRY(cpu_arm1020e_switch_mm)
mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
#endif
ret lr
-
+SYM_FUNC_END(cpu_arm1020e_switch_mm)
+
/*
* cpu_arm1020e_set_pte(ptep, pte)
*
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_arm1020e_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_arm1020e_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext
mov r0, r0
@@ -408,6 +413,7 @@ ENTRY(cpu_arm1020e_set_pte_ext)
#endif
#endif /* CONFIG_MMU */
ret lr
+SYM_FUNC_END(cpu_arm1020e_set_pte_ext)
.type __arm1020e_setup, #function
__arm1020e_setup:
@@ -57,18 +57,20 @@
/*
* cpu_arm1022_proc_init()
*/
-ENTRY(cpu_arm1022_proc_init)
+SYM_TYPED_FUNC_START(cpu_arm1022_proc_init)
ret lr
+SYM_FUNC_END(cpu_arm1022_proc_init)
/*
* cpu_arm1022_proc_fin()
*/
-ENTRY(cpu_arm1022_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm1022_proc_fin)
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x000e @ ............wca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
+SYM_FUNC_END(cpu_arm1022_proc_fin)
/*
* cpu_arm1022_reset(loc)
@@ -81,7 +83,7 @@ ENTRY(cpu_arm1022_proc_fin)
*/
.align 5
.pushsection .idmap.text, "ax"
-ENTRY(cpu_arm1022_reset)
+SYM_TYPED_FUNC_START(cpu_arm1022_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
@@ -93,16 +95,17 @@ ENTRY(cpu_arm1022_reset)
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
ret r0
-ENDPROC(cpu_arm1022_reset)
+SYM_FUNC_END(cpu_arm1022_reset)
.popsection
/*
* cpu_arm1022_do_idle()
*/
.align 5
-ENTRY(cpu_arm1022_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm1022_do_idle)
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
ret lr
+SYM_FUNC_END(cpu_arm1022_do_idle)
/* ================================= CACHE ================================ */
@@ -344,7 +347,7 @@ SYM_TYPED_FUNC_START(arm1022_dma_unmap_area)
SYM_FUNC_END(arm1022_dma_unmap_area)
.align 5
-ENTRY(cpu_arm1022_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_arm1022_dcache_clean_area)
#ifndef CONFIG_CPU_DCACHE_DISABLE
mov ip, #0
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -353,6 +356,7 @@ ENTRY(cpu_arm1022_dcache_clean_area)
bhi 1b
#endif
ret lr
+SYM_FUNC_END(cpu_arm1022_dcache_clean_area)
/* =============================== PageTable ============================== */
@@ -364,7 +368,7 @@ ENTRY(cpu_arm1022_dcache_clean_area)
* pgd: new page tables
*/
.align 5
-ENTRY(cpu_arm1022_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm1022_switch_mm)
#ifdef CONFIG_MMU
#ifndef CONFIG_CPU_DCACHE_DISABLE
mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 16 segments
@@ -384,14 +388,15 @@ ENTRY(cpu_arm1022_switch_mm)
mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
#endif
ret lr
-
+SYM_FUNC_END(cpu_arm1022_switch_mm)
+
/*
* cpu_arm1022_set_pte_ext(ptep, pte, ext)
*
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_arm1022_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_arm1022_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext
mov r0, r0
@@ -400,6 +405,7 @@ ENTRY(cpu_arm1022_set_pte_ext)
#endif
#endif /* CONFIG_MMU */
ret lr
+SYM_FUNC_END(cpu_arm1022_set_pte_ext)
.type __arm1022_setup, #function
__arm1022_setup:
@@ -57,18 +57,20 @@
/*
* cpu_arm1026_proc_init()
*/
-ENTRY(cpu_arm1026_proc_init)
+SYM_TYPED_FUNC_START(cpu_arm1026_proc_init)
ret lr
+SYM_FUNC_END(cpu_arm1026_proc_init)
/*
* cpu_arm1026_proc_fin()
*/
-ENTRY(cpu_arm1026_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm1026_proc_fin)
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x000e @ ............wca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
+SYM_FUNC_END(cpu_arm1026_proc_fin)
/*
* cpu_arm1026_reset(loc)
@@ -81,7 +83,7 @@ ENTRY(cpu_arm1026_proc_fin)
*/
.align 5
.pushsection .idmap.text, "ax"
-ENTRY(cpu_arm1026_reset)
+SYM_TYPED_FUNC_START(cpu_arm1026_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
@@ -93,16 +95,17 @@ ENTRY(cpu_arm1026_reset)
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
ret r0
-ENDPROC(cpu_arm1026_reset)
+SYM_FUNC_END(cpu_arm1026_reset)
.popsection
/*
* cpu_arm1026_do_idle()
*/
.align 5
-ENTRY(cpu_arm1026_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm1026_do_idle)
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
ret lr
+SYM_FUNC_END(cpu_arm1026_do_idle)
/* ================================= CACHE ================================ */
@@ -339,7 +342,7 @@ SYM_TYPED_FUNC_START(arm1026_dma_unmap_area)
SYM_FUNC_END(arm1026_dma_unmap_area)
.align 5
-ENTRY(cpu_arm1026_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_arm1026_dcache_clean_area)
#ifndef CONFIG_CPU_DCACHE_DISABLE
mov ip, #0
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -348,6 +351,7 @@ ENTRY(cpu_arm1026_dcache_clean_area)
bhi 1b
#endif
ret lr
+SYM_FUNC_END(cpu_arm1026_dcache_clean_area)
/* =============================== PageTable ============================== */
@@ -359,7 +363,7 @@ ENTRY(cpu_arm1026_dcache_clean_area)
* pgd: new page tables
*/
.align 5
-ENTRY(cpu_arm1026_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm1026_switch_mm)
#ifdef CONFIG_MMU
mov r1, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
@@ -374,14 +378,15 @@ ENTRY(cpu_arm1026_switch_mm)
mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
#endif
ret lr
-
+SYM_FUNC_END(cpu_arm1026_switch_mm)
+
/*
* cpu_arm1026_set_pte_ext(ptep, pte, ext)
*
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_arm1026_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_arm1026_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext
mov r0, r0
@@ -390,6 +395,7 @@ ENTRY(cpu_arm1026_set_pte_ext)
#endif
#endif /* CONFIG_MMU */
ret lr
+SYM_FUNC_END(cpu_arm1026_set_pte_ext)
.type __arm1026_setup, #function
__arm1026_setup:
@@ -20,6 +20,7 @@
*/
#include <linux/linkage.h>
#include <linux/init.h>
+#include <linux/cfi_types.h>
#include <linux/pgtable.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
@@ -35,24 +36,30 @@
*
* Notes : This processor does not require these
*/
-ENTRY(cpu_arm720_dcache_clean_area)
-ENTRY(cpu_arm720_proc_init)
+SYM_TYPED_FUNC_START(cpu_arm720_dcache_clean_area)
ret lr
+SYM_FUNC_END(cpu_arm720_dcache_clean_area)
-ENTRY(cpu_arm720_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm720_proc_init)
+ ret lr
+SYM_FUNC_END(cpu_arm720_proc_init)
+
+SYM_TYPED_FUNC_START(cpu_arm720_proc_fin)
mrc p15, 0, r0, c1, c0, 0
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x000e @ ............wca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
+SYM_FUNC_END(cpu_arm720_proc_fin)
/*
* Function: arm720_proc_do_idle(void)
* Params : r0 = unused
* Purpose : put the processor in proper idle mode
*/
-ENTRY(cpu_arm720_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm720_do_idle)
ret lr
+SYM_FUNC_END(cpu_arm720_do_idle)
/*
* Function: arm720_switch_mm(unsigned long pgd_phys)
@@ -60,7 +67,7 @@ ENTRY(cpu_arm720_do_idle)
* Purpose : Perform a task switch, saving the old process' state and restoring
* the new.
*/
-ENTRY(cpu_arm720_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm720_switch_mm)
#ifdef CONFIG_MMU
mov r1, #0
mcr p15, 0, r1, c7, c7, 0 @ invalidate cache
@@ -68,6 +75,7 @@ ENTRY(cpu_arm720_switch_mm)
mcr p15, 0, r1, c8, c7, 0 @ flush TLB (v4)
#endif
ret lr
+SYM_FUNC_END(cpu_arm720_switch_mm)
/*
* Function: arm720_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext)
@@ -76,11 +84,12 @@ ENTRY(cpu_arm720_switch_mm)
* Purpose : Set a PTE and flush it out of any WB cache
*/
.align 5
-ENTRY(cpu_arm720_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_arm720_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext wc_disable=0
#endif
ret lr
+SYM_FUNC_END(cpu_arm720_set_pte_ext)
/*
* Function: arm720_reset
@@ -88,7 +97,7 @@ ENTRY(cpu_arm720_set_pte_ext)
* Notes : This sets up everything for a reset
*/
.pushsection .idmap.text, "ax"
-ENTRY(cpu_arm720_reset)
+SYM_TYPED_FUNC_START(cpu_arm720_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate cache
#ifdef CONFIG_MMU
@@ -99,7 +108,7 @@ ENTRY(cpu_arm720_reset)
bic ip, ip, #0x2100 @ ..v....s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
ret r0
-ENDPROC(cpu_arm720_reset)
+SYM_FUNC_END(cpu_arm720_reset)
.popsection
.type __arm710_setup, #function
@@ -6,6 +6,7 @@
*/
#include <linux/linkage.h>
#include <linux/init.h>
+#include <linux/cfi_types.h>
#include <linux/pgtable.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
@@ -24,21 +25,32 @@
*
* These are not required.
*/
-ENTRY(cpu_arm740_proc_init)
-ENTRY(cpu_arm740_do_idle)
-ENTRY(cpu_arm740_dcache_clean_area)
-ENTRY(cpu_arm740_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm740_proc_init)
ret lr
+SYM_FUNC_END(cpu_arm740_proc_init)
+
+SYM_TYPED_FUNC_START(cpu_arm740_do_idle)
+ ret lr
+SYM_FUNC_END(cpu_arm740_do_idle)
+
+SYM_TYPED_FUNC_START(cpu_arm740_dcache_clean_area)
+ ret lr
+SYM_FUNC_END(cpu_arm740_dcache_clean_area)
+
+SYM_TYPED_FUNC_START(cpu_arm740_switch_mm)
+ ret lr
+SYM_FUNC_END(cpu_arm740_switch_mm)
/*
* cpu_arm740_proc_fin()
*/
-ENTRY(cpu_arm740_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm740_proc_fin)
mrc p15, 0, r0, c1, c0, 0
bic r0, r0, #0x3f000000 @ bank/f/lock/s
bic r0, r0, #0x0000000c @ w-buffer/cache
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
+SYM_FUNC_END(cpu_arm740_proc_fin)
/*
* cpu_arm740_reset(loc)
@@ -46,14 +58,14 @@ ENTRY(cpu_arm740_proc_fin)
* Notes : This sets up everything for a reset
*/
.pushsection .idmap.text, "ax"
-ENTRY(cpu_arm740_reset)
+SYM_TYPED_FUNC_START(cpu_arm740_reset)
mov ip, #0
mcr p15, 0, ip, c7, c0, 0 @ invalidate cache
mrc p15, 0, ip, c1, c0, 0 @ get ctrl register
bic ip, ip, #0x0000000c @ ............wc..
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
ret r0
-ENDPROC(cpu_arm740_reset)
+SYM_FUNC_END(cpu_arm740_reset)
.popsection
.type __arm740_setup, #function
@@ -6,6 +6,7 @@
*/
#include <linux/linkage.h>
#include <linux/init.h>
+#include <linux/cfi_types.h>
#include <linux/pgtable.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
@@ -23,18 +24,29 @@
* cpu_arm7tdmi_switch_mm()
*
* These are not required.
- */
-ENTRY(cpu_arm7tdmi_proc_init)
-ENTRY(cpu_arm7tdmi_do_idle)
-ENTRY(cpu_arm7tdmi_dcache_clean_area)
-ENTRY(cpu_arm7tdmi_switch_mm)
- ret lr
+*/
+SYM_TYPED_FUNC_START(cpu_arm7tdmi_proc_init)
+ ret lr
+SYM_FUNC_END(cpu_arm7tdmi_proc_init)
+
+SYM_TYPED_FUNC_START(cpu_arm7tdmi_do_idle)
+ ret lr
+SYM_FUNC_END(cpu_arm7tdmi_do_idle)
+
+SYM_TYPED_FUNC_START(cpu_arm7tdmi_dcache_clean_area)
+ ret lr
+SYM_FUNC_END(cpu_arm7tdmi_dcache_clean_area)
+
+SYM_TYPED_FUNC_START(cpu_arm7tdmi_switch_mm)
+ ret lr
+SYM_FUNC_END(cpu_arm7tdmi_switch_mm)
/*
* cpu_arm7tdmi_proc_fin()
- */
-ENTRY(cpu_arm7tdmi_proc_fin)
- ret lr
+*/
+SYM_TYPED_FUNC_START(cpu_arm7tdmi_proc_fin)
+ ret lr
+SYM_FUNC_END(cpu_arm7tdmi_proc_fin)
/*
* Function: cpu_arm7tdmi_reset(loc)
@@ -42,9 +54,9 @@ ENTRY(cpu_arm7tdmi_proc_fin)
* Purpose : Sets up everything for a reset and jump to the location for soft reset.
*/
.pushsection .idmap.text, "ax"
-ENTRY(cpu_arm7tdmi_reset)
+SYM_TYPED_FUNC_START(cpu_arm7tdmi_reset)
ret r0
-ENDPROC(cpu_arm7tdmi_reset)
+SYM_FUNC_END(cpu_arm7tdmi_reset)
.popsection
.type __arm7tdmi_setup, #function
@@ -49,18 +49,20 @@
/*
* cpu_arm920_proc_init()
*/
-ENTRY(cpu_arm920_proc_init)
+SYM_TYPED_FUNC_START(cpu_arm920_proc_init)
ret lr
+SYM_FUNC_END(cpu_arm920_proc_init)
/*
* cpu_arm920_proc_fin()
*/
-ENTRY(cpu_arm920_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm920_proc_fin)
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x000e @ ............wca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
+SYM_FUNC_END(cpu_arm920_proc_fin)
/*
* cpu_arm920_reset(loc)
@@ -73,7 +75,7 @@ ENTRY(cpu_arm920_proc_fin)
*/
.align 5
.pushsection .idmap.text, "ax"
-ENTRY(cpu_arm920_reset)
+SYM_TYPED_FUNC_START(cpu_arm920_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
@@ -85,17 +87,17 @@ ENTRY(cpu_arm920_reset)
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
ret r0
-ENDPROC(cpu_arm920_reset)
+SYM_FUNC_END(cpu_arm920_reset)
.popsection
/*
* cpu_arm920_do_idle()
*/
.align 5
-ENTRY(cpu_arm920_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm920_do_idle)
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
ret lr
-
+SYM_FUNC_END(cpu_arm920_do_idle)
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
@@ -312,12 +314,13 @@ SYM_FUNC_END(arm920_dma_unmap_area)
#endif /* !CONFIG_CPU_DCACHE_WRITETHROUGH */
-ENTRY(cpu_arm920_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_arm920_dcache_clean_area)
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
subs r1, r1, #CACHE_DLINESIZE
bhi 1b
ret lr
+SYM_FUNC_END(cpu_arm920_dcache_clean_area)
/* =============================== PageTable ============================== */
@@ -329,7 +332,7 @@ ENTRY(cpu_arm920_dcache_clean_area)
* pgd: new page tables
*/
.align 5
-ENTRY(cpu_arm920_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm920_switch_mm)
#ifdef CONFIG_MMU
mov ip, #0
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
@@ -353,6 +356,7 @@ ENTRY(cpu_arm920_switch_mm)
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
ret lr
+SYM_FUNC_END(cpu_arm920_switch_mm)
/*
* cpu_arm920_set_pte(ptep, pte, ext)
@@ -360,7 +364,7 @@ ENTRY(cpu_arm920_switch_mm)
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_arm920_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_arm920_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext
mov r0, r0
@@ -368,21 +372,22 @@ ENTRY(cpu_arm920_set_pte_ext)
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif
ret lr
+SYM_FUNC_END(cpu_arm920_set_pte_ext)
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm920_suspend_size
.equ cpu_arm920_suspend_size, 4 * 3
#ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_arm920_do_suspend)
+SYM_TYPED_FUNC_START(cpu_arm920_do_suspend)
stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID
mrc p15, 0, r5, c3, c0, 0 @ Domain ID
mrc p15, 0, r6, c1, c0, 0 @ Control register
stmia r0, {r4 - r6}
ldmfd sp!, {r4 - r6, pc}
-ENDPROC(cpu_arm920_do_suspend)
+SYM_FUNC_END(cpu_arm920_do_suspend)
-ENTRY(cpu_arm920_do_resume)
+SYM_TYPED_FUNC_START(cpu_arm920_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
@@ -392,7 +397,7 @@ ENTRY(cpu_arm920_do_resume)
mcr p15, 0, r1, c2, c0, 0 @ TTB address
mov r0, r6 @ control register
b cpu_resume_mmu
-ENDPROC(cpu_arm920_do_resume)
+SYM_FUNC_END(cpu_arm920_do_resume)
#endif
.type __arm920_setup, #function
@@ -51,18 +51,20 @@
/*
* cpu_arm922_proc_init()
*/
-ENTRY(cpu_arm922_proc_init)
+SYM_TYPED_FUNC_START(cpu_arm922_proc_init)
ret lr
+SYM_FUNC_END(cpu_arm922_proc_init)
/*
* cpu_arm922_proc_fin()
*/
-ENTRY(cpu_arm922_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm922_proc_fin)
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x000e @ ............wca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
+SYM_FUNC_END(cpu_arm922_proc_fin)
/*
* cpu_arm922_reset(loc)
@@ -75,7 +77,7 @@ ENTRY(cpu_arm922_proc_fin)
*/
.align 5
.pushsection .idmap.text, "ax"
-ENTRY(cpu_arm922_reset)
+SYM_TYPED_FUNC_START(cpu_arm922_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
@@ -87,17 +89,17 @@ ENTRY(cpu_arm922_reset)
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
ret r0
-ENDPROC(cpu_arm922_reset)
+SYM_FUNC_END(cpu_arm922_reset)
.popsection
/*
* cpu_arm922_do_idle()
*/
.align 5
-ENTRY(cpu_arm922_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm922_do_idle)
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
ret lr
-
+SYM_FUNC_END(cpu_arm922_do_idle)
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
@@ -313,7 +315,7 @@ SYM_FUNC_END(arm922_dma_unmap_area)
#endif /* !CONFIG_CPU_DCACHE_WRITETHROUGH */
-ENTRY(cpu_arm922_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_arm922_dcache_clean_area)
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -321,6 +323,7 @@ ENTRY(cpu_arm922_dcache_clean_area)
bhi 1b
#endif
ret lr
+SYM_FUNC_END(cpu_arm922_dcache_clean_area)
/* =============================== PageTable ============================== */
@@ -332,7 +335,7 @@ ENTRY(cpu_arm922_dcache_clean_area)
* pgd: new page tables
*/
.align 5
-ENTRY(cpu_arm922_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm922_switch_mm)
#ifdef CONFIG_MMU
mov ip, #0
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
@@ -356,6 +359,7 @@ ENTRY(cpu_arm922_switch_mm)
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
ret lr
+SYM_FUNC_END(cpu_arm922_switch_mm)
/*
* cpu_arm922_set_pte_ext(ptep, pte, ext)
@@ -363,7 +367,7 @@ ENTRY(cpu_arm922_switch_mm)
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_arm922_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_arm922_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext
mov r0, r0
@@ -371,6 +375,7 @@ ENTRY(cpu_arm922_set_pte_ext)
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif /* CONFIG_MMU */
ret lr
+SYM_FUNC_END(cpu_arm922_set_pte_ext)
.type __arm922_setup, #function
__arm922_setup:
@@ -72,18 +72,20 @@
/*
* cpu_arm925_proc_init()
*/
-ENTRY(cpu_arm925_proc_init)
+SYM_TYPED_FUNC_START(cpu_arm925_proc_init)
ret lr
+SYM_FUNC_END(cpu_arm925_proc_init)
/*
* cpu_arm925_proc_fin()
*/
-ENTRY(cpu_arm925_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm925_proc_fin)
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x000e @ ............wca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
+SYM_FUNC_END(cpu_arm925_proc_fin)
/*
* cpu_arm925_reset(loc)
@@ -96,14 +98,14 @@ ENTRY(cpu_arm925_proc_fin)
*/
.align 5
.pushsection .idmap.text, "ax"
-ENTRY(cpu_arm925_reset)
+SYM_TYPED_FUNC_START(cpu_arm925_reset)
/* Send software reset to MPU and DSP */
mov ip, #0xff000000
orr ip, ip, #0x00fe0000
orr ip, ip, #0x0000ce00
mov r4, #1
strh r4, [ip, #0x10]
-ENDPROC(cpu_arm925_reset)
+SYM_FUNC_END(cpu_arm925_reset)
.popsection
mov ip, #0
@@ -124,7 +126,7 @@ ENDPROC(cpu_arm925_reset)
* Called with IRQs disabled
*/
.align 10
-ENTRY(cpu_arm925_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm925_do_idle)
mov r0, #0
mrc p15, 0, r1, c1, c0, 0 @ Read control register
mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer
@@ -133,6 +135,7 @@ ENTRY(cpu_arm925_do_idle)
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
mcr p15, 0, r1, c1, c0, 0 @ Restore ICache enable
ret lr
+SYM_FUNC_END(cpu_arm925_do_idle)
/*
* flush_icache_all()
@@ -366,7 +369,7 @@ SYM_TYPED_FUNC_START(arm925_dma_unmap_area)
ret lr
SYM_FUNC_END(arm925_dma_unmap_area)
-ENTRY(cpu_arm925_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_arm925_dcache_clean_area)
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -375,6 +378,7 @@ ENTRY(cpu_arm925_dcache_clean_area)
#endif
mcr p15, 0, r0, c7, c10, 4 @ drain WB
ret lr
+SYM_FUNC_END(cpu_arm925_dcache_clean_area)
/* =============================== PageTable ============================== */
@@ -386,7 +390,7 @@ ENTRY(cpu_arm925_dcache_clean_area)
* pgd: new page tables
*/
.align 5
-ENTRY(cpu_arm925_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm925_switch_mm)
#ifdef CONFIG_MMU
mov ip, #0
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
@@ -404,6 +408,7 @@ ENTRY(cpu_arm925_switch_mm)
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
ret lr
+SYM_FUNC_END(cpu_arm925_switch_mm)
/*
* cpu_arm925_set_pte_ext(ptep, pte, ext)
@@ -411,7 +416,7 @@ ENTRY(cpu_arm925_switch_mm)
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_arm925_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_arm925_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext
mov r0, r0
@@ -421,6 +426,7 @@ ENTRY(cpu_arm925_set_pte_ext)
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif /* CONFIG_MMU */
ret lr
+SYM_FUNC_END(cpu_arm925_set_pte_ext)
.type __arm925_setup, #function
__arm925_setup:
@@ -41,18 +41,20 @@
/*
* cpu_arm926_proc_init()
*/
-ENTRY(cpu_arm926_proc_init)
+SYM_TYPED_FUNC_START(cpu_arm926_proc_init)
ret lr
+SYM_FUNC_END(cpu_arm926_proc_init)
/*
* cpu_arm926_proc_fin()
*/
-ENTRY(cpu_arm926_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm926_proc_fin)
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x000e @ ............wca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
+SYM_FUNC_END(cpu_arm926_proc_fin)
/*
* cpu_arm926_reset(loc)
@@ -65,7 +67,7 @@ ENTRY(cpu_arm926_proc_fin)
*/
.align 5
.pushsection .idmap.text, "ax"
-ENTRY(cpu_arm926_reset)
+SYM_TYPED_FUNC_START(cpu_arm926_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
@@ -77,7 +79,7 @@ ENTRY(cpu_arm926_reset)
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
ret r0
-ENDPROC(cpu_arm926_reset)
+SYM_FUNC_END(cpu_arm926_reset)
.popsection
/*
@@ -86,7 +88,7 @@ ENDPROC(cpu_arm926_reset)
* Called with IRQs disabled
*/
.align 10
-ENTRY(cpu_arm926_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm926_do_idle)
mov r0, #0
mrc p15, 0, r1, c1, c0, 0 @ Read control register
mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer
@@ -99,6 +101,7 @@ ENTRY(cpu_arm926_do_idle)
mcr p15, 0, r1, c1, c0, 0 @ Restore ICache enable
msr cpsr_c, r3 @ Restore FIQ state
ret lr
+SYM_FUNC_END(cpu_arm926_do_idle)
/*
* flush_icache_all()
@@ -329,7 +332,7 @@ SYM_TYPED_FUNC_START(arm926_dma_unmap_area)
ret lr
SYM_FUNC_END(arm926_dma_unmap_area)
-ENTRY(cpu_arm926_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_arm926_dcache_clean_area)
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -338,6 +341,7 @@ ENTRY(cpu_arm926_dcache_clean_area)
#endif
mcr p15, 0, r0, c7, c10, 4 @ drain WB
ret lr
+SYM_FUNC_END(cpu_arm926_dcache_clean_area)
/* =============================== PageTable ============================== */
@@ -349,7 +353,8 @@ ENTRY(cpu_arm926_dcache_clean_area)
* pgd: new page tables
*/
.align 5
-ENTRY(cpu_arm926_switch_mm)
+
+SYM_TYPED_FUNC_START(cpu_arm926_switch_mm)
#ifdef CONFIG_MMU
mov ip, #0
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
@@ -365,6 +370,7 @@ ENTRY(cpu_arm926_switch_mm)
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
ret lr
+SYM_FUNC_END(cpu_arm926_switch_mm)
/*
* cpu_arm926_set_pte_ext(ptep, pte, ext)
@@ -372,7 +378,7 @@ ENTRY(cpu_arm926_switch_mm)
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_arm926_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_arm926_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext
mov r0, r0
@@ -382,21 +388,22 @@ ENTRY(cpu_arm926_set_pte_ext)
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif
ret lr
+SYM_FUNC_END(cpu_arm926_set_pte_ext)
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm926_suspend_size
.equ cpu_arm926_suspend_size, 4 * 3
#ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_arm926_do_suspend)
+SYM_TYPED_FUNC_START(cpu_arm926_do_suspend)
stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID
mrc p15, 0, r5, c3, c0, 0 @ Domain ID
mrc p15, 0, r6, c1, c0, 0 @ Control register
stmia r0, {r4 - r6}
ldmfd sp!, {r4 - r6, pc}
-ENDPROC(cpu_arm926_do_suspend)
+SYM_FUNC_END(cpu_arm926_do_suspend)
-ENTRY(cpu_arm926_do_resume)
+SYM_TYPED_FUNC_START(cpu_arm926_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
@@ -406,7 +413,7 @@ ENTRY(cpu_arm926_do_resume)
mcr p15, 0, r1, c2, c0, 0 @ TTB address
mov r0, r6 @ control register
b cpu_resume_mmu
-ENDPROC(cpu_arm926_do_resume)
+SYM_FUNC_END(cpu_arm926_do_resume)
#endif
.type __arm926_setup, #function
@@ -26,19 +26,24 @@
*
* These are not required.
*/
-ENTRY(cpu_arm940_proc_init)
-ENTRY(cpu_arm940_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm940_proc_init)
ret lr
+SYM_FUNC_END(cpu_arm940_proc_init)
+
+SYM_TYPED_FUNC_START(cpu_arm940_switch_mm)
+ ret lr
+SYM_FUNC_END(cpu_arm940_switch_mm)
/*
* cpu_arm940_proc_fin()
*/
-ENTRY(cpu_arm940_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm940_proc_fin)
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x00001000 @ i-cache
bic r0, r0, #0x00000004 @ d-cache
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
+SYM_FUNC_END(cpu_arm940_proc_fin)
/*
* cpu_arm940_reset(loc)
@@ -46,7 +51,7 @@ ENTRY(cpu_arm940_proc_fin)
* Notes : This sets up everything for a reset
*/
.pushsection .idmap.text, "ax"
-ENTRY(cpu_arm940_reset)
+SYM_TYPED_FUNC_START(cpu_arm940_reset)
mov ip, #0
mcr p15, 0, ip, c7, c5, 0 @ flush I cache
mcr p15, 0, ip, c7, c6, 0 @ flush D cache
@@ -56,16 +61,17 @@ ENTRY(cpu_arm940_reset)
bic ip, ip, #0x00001000 @ i-cache
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
ret r0
-ENDPROC(cpu_arm940_reset)
+SYM_FUNC_END(cpu_arm940_reset)
.popsection
/*
* cpu_arm940_do_idle()
*/
.align 5
-ENTRY(cpu_arm940_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm940_do_idle)
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
ret lr
+SYM_FUNC_END(cpu_arm940_do_idle)
/*
* flush_icache_all()
@@ -202,7 +208,7 @@ arm940_dma_inv_range:
* - end - virtual end address
*/
arm940_dma_clean_range:
-ENTRY(cpu_arm940_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_arm940_dcache_clean_area)
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
@@ -215,6 +221,7 @@ ENTRY(cpu_arm940_dcache_clean_area)
#endif
mcr p15, 0, ip, c7, c10, 4 @ drain WB
ret lr
+SYM_FUNC_END(cpu_arm940_dcache_clean_area)
/*
* dma_flush_range(start, end)
@@ -33,19 +33,24 @@
*
* These are not required.
*/
-ENTRY(cpu_arm946_proc_init)
-ENTRY(cpu_arm946_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm946_proc_init)
ret lr
+SYM_FUNC_END(cpu_arm946_proc_init)
+
+SYM_TYPED_FUNC_START(cpu_arm946_switch_mm)
+ ret lr
+SYM_FUNC_END(cpu_arm946_switch_mm)
/*
* cpu_arm946_proc_fin()
*/
-ENTRY(cpu_arm946_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm946_proc_fin)
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x00001000 @ i-cache
bic r0, r0, #0x00000004 @ d-cache
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
+SYM_FUNC_END(cpu_arm946_proc_fin)
/*
* cpu_arm946_reset(loc)
@@ -53,7 +58,7 @@ ENTRY(cpu_arm946_proc_fin)
* Notes : This sets up everything for a reset
*/
.pushsection .idmap.text, "ax"
-ENTRY(cpu_arm946_reset)
+SYM_TYPED_FUNC_START(cpu_arm946_reset)
mov ip, #0
mcr p15, 0, ip, c7, c5, 0 @ flush I cache
mcr p15, 0, ip, c7, c6, 0 @ flush D cache
@@ -63,16 +68,17 @@ ENTRY(cpu_arm946_reset)
bic ip, ip, #0x00001000 @ i-cache
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
ret r0
-ENDPROC(cpu_arm946_reset)
+SYM_FUNC_END(cpu_arm946_reset)
.popsection
/*
* cpu_arm946_do_idle()
*/
.align 5
-ENTRY(cpu_arm946_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm946_do_idle)
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
ret lr
+SYM_FUNC_END(cpu_arm946_do_idle)
/*
* flush_icache_all()
@@ -310,7 +316,7 @@ SYM_TYPED_FUNC_START(arm946_dma_unmap_area)
ret lr
SYM_FUNC_END(arm946_dma_unmap_area)
-ENTRY(cpu_arm946_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_arm946_dcache_clean_area)
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -319,6 +325,7 @@ ENTRY(cpu_arm946_dcache_clean_area)
#endif
mcr p15, 0, r0, c7, c10, 4 @ drain WB
ret lr
+SYM_FUNC_END(cpu_arm946_dcache_clean_area)
.type __arm946_setup, #function
__arm946_setup:
@@ -6,6 +6,7 @@
*/
#include <linux/linkage.h>
#include <linux/init.h>
+#include <linux/cfi_types.h>
#include <linux/pgtable.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
@@ -24,17 +25,28 @@
*
* These are not required.
*/
-ENTRY(cpu_arm9tdmi_proc_init)
-ENTRY(cpu_arm9tdmi_do_idle)
-ENTRY(cpu_arm9tdmi_dcache_clean_area)
-ENTRY(cpu_arm9tdmi_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm9tdmi_proc_init)
ret lr
+SYM_FUNC_END(cpu_arm9tdmi_proc_init)
+
+SYM_TYPED_FUNC_START(cpu_arm9tdmi_do_idle)
+ ret lr
+SYM_FUNC_END(cpu_arm9tdmi_do_idle)
+
+SYM_TYPED_FUNC_START(cpu_arm9tdmi_dcache_clean_area)
+ ret lr
+SYM_FUNC_END(cpu_arm9tdmi_dcache_clean_area)
+
+SYM_TYPED_FUNC_START(cpu_arm9tdmi_switch_mm)
+ ret lr
+SYM_FUNC_END(cpu_arm9tdmi_switch_mm)
/*
* cpu_arm9tdmi_proc_fin()
*/
-ENTRY(cpu_arm9tdmi_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm9tdmi_proc_fin)
ret lr
+SYM_FUNC_END(cpu_arm9tdmi_proc_fin)
/*
* Function: cpu_arm9tdmi_reset(loc)
@@ -42,9 +54,9 @@ ENTRY(cpu_arm9tdmi_proc_fin)
* Purpose : Sets up everything for a reset and jump to the location for soft reset.
*/
.pushsection .idmap.text, "ax"
-ENTRY(cpu_arm9tdmi_reset)
+SYM_TYPED_FUNC_START(cpu_arm9tdmi_reset)
ret r0
-ENDPROC(cpu_arm9tdmi_reset)
+SYM_FUNC_END(cpu_arm9tdmi_reset)
.popsection
.type __arm9tdmi_setup, #function
@@ -11,6 +11,7 @@
*/
#include <linux/linkage.h>
#include <linux/init.h>
+#include <linux/cfi_types.h>
#include <linux/pgtable.h>
#include <asm/assembler.h>
#include <asm/hwcap.h>
@@ -26,13 +27,14 @@
/*
* cpu_fa526_proc_init()
*/
-ENTRY(cpu_fa526_proc_init)
+SYM_TYPED_FUNC_START(cpu_fa526_proc_init)
ret lr
+SYM_FUNC_END(cpu_fa526_proc_init)
/*
* cpu_fa526_proc_fin()
*/
-ENTRY(cpu_fa526_proc_fin)
+SYM_TYPED_FUNC_START(cpu_fa526_proc_fin)
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x000e @ ............wca.
@@ -40,6 +42,7 @@ ENTRY(cpu_fa526_proc_fin)
nop
nop
ret lr
+SYM_FUNC_END(cpu_fa526_proc_fin)
/*
* cpu_fa526_reset(loc)
@@ -52,7 +55,7 @@ ENTRY(cpu_fa526_proc_fin)
*/
.align 4
.pushsection .idmap.text, "ax"
-ENTRY(cpu_fa526_reset)
+SYM_TYPED_FUNC_START(cpu_fa526_reset)
/* TODO: Use CP8 if possible... */
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
@@ -68,24 +71,25 @@ ENTRY(cpu_fa526_reset)
nop
nop
ret r0
-ENDPROC(cpu_fa526_reset)
+SYM_FUNC_END(cpu_fa526_reset)
.popsection
/*
* cpu_fa526_do_idle()
*/
.align 4
-ENTRY(cpu_fa526_do_idle)
+SYM_TYPED_FUNC_START(cpu_fa526_do_idle)
ret lr
+SYM_FUNC_END(cpu_fa526_do_idle)
-
-ENTRY(cpu_fa526_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_fa526_dcache_clean_area)
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
subs r1, r1, #CACHE_DLINESIZE
bhi 1b
mcr p15, 0, r0, c7, c10, 4 @ drain WB
ret lr
+SYM_FUNC_END(cpu_fa526_dcache_clean_area)
/* =============================== PageTable ============================== */
@@ -97,7 +101,7 @@ ENTRY(cpu_fa526_dcache_clean_area)
* pgd: new page tables
*/
.align 4
-ENTRY(cpu_fa526_switch_mm)
+SYM_TYPED_FUNC_START(cpu_fa526_switch_mm)
#ifdef CONFIG_MMU
mov ip, #0
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
@@ -113,6 +117,7 @@ ENTRY(cpu_fa526_switch_mm)
mcr p15, 0, ip, c8, c7, 0 @ invalidate UTLB
#endif
ret lr
+SYM_FUNC_END(cpu_fa526_switch_mm)
/*
* cpu_fa526_set_pte_ext(ptep, pte, ext)
@@ -120,7 +125,7 @@ ENTRY(cpu_fa526_switch_mm)
* Set a PTE and flush it out
*/
.align 4
-ENTRY(cpu_fa526_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_fa526_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext
mov r0, r0
@@ -129,6 +134,7 @@ ENTRY(cpu_fa526_set_pte_ext)
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif
ret lr
+SYM_FUNC_END(cpu_fa526_set_pte_ext)
.type __fa526_setup, #function
__fa526_setup:
@@ -44,7 +44,7 @@ __cache_params:
/*
* cpu_feroceon_proc_init()
*/
-ENTRY(cpu_feroceon_proc_init)
+SYM_TYPED_FUNC_START(cpu_feroceon_proc_init)
mrc p15, 0, r0, c0, c0, 1 @ read cache type register
ldr r1, __cache_params
mov r2, #(16 << 5)
@@ -62,11 +62,12 @@ ENTRY(cpu_feroceon_proc_init)
str_l r1, VFP_arch_feroceon, r2
#endif
ret lr
+SYM_FUNC_END(cpu_feroceon_proc_init)
/*
* cpu_feroceon_proc_fin()
*/
-ENTRY(cpu_feroceon_proc_fin)
+SYM_TYPED_FUNC_START(cpu_feroceon_proc_fin)
#if defined(CONFIG_CACHE_FEROCEON_L2) && \
!defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
mov r0, #0
@@ -79,6 +80,7 @@ ENTRY(cpu_feroceon_proc_fin)
bic r0, r0, #0x000e @ ............wca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
+SYM_FUNC_END(cpu_feroceon_proc_fin)
/*
* cpu_feroceon_reset(loc)
@@ -91,7 +93,7 @@ ENTRY(cpu_feroceon_proc_fin)
*/
.align 5
.pushsection .idmap.text, "ax"
-ENTRY(cpu_feroceon_reset)
+SYM_TYPED_FUNC_START(cpu_feroceon_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
@@ -103,7 +105,7 @@ ENTRY(cpu_feroceon_reset)
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
ret r0
-ENDPROC(cpu_feroceon_reset)
+SYM_FUNC_END(cpu_feroceon_reset)
.popsection
/*
@@ -112,11 +114,12 @@ ENDPROC(cpu_feroceon_reset)
* Called with IRQs disabled
*/
.align 5
-ENTRY(cpu_feroceon_do_idle)
+SYM_TYPED_FUNC_START(cpu_feroceon_do_idle)
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
ret lr
+SYM_FUNC_END(cpu_feroceon_do_idle)
/*
* flush_icache_all()
@@ -413,7 +416,7 @@ SYM_TYPED_FUNC_START(feroceon_dma_unmap_area)
SYM_FUNC_END(feroceon_dma_unmap_area)
.align 5
-ENTRY(cpu_feroceon_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_feroceon_dcache_clean_area)
#if defined(CONFIG_CACHE_FEROCEON_L2) && \
!defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
mov r2, r0
@@ -432,6 +435,7 @@ ENTRY(cpu_feroceon_dcache_clean_area)
#endif
mcr p15, 0, r0, c7, c10, 4 @ drain WB
ret lr
+SYM_FUNC_END(cpu_feroceon_dcache_clean_area)
/* =============================== PageTable ============================== */
@@ -443,7 +447,7 @@ ENTRY(cpu_feroceon_dcache_clean_area)
* pgd: new page tables
*/
.align 5
-ENTRY(cpu_feroceon_switch_mm)
+SYM_TYPED_FUNC_START(cpu_feroceon_switch_mm)
#ifdef CONFIG_MMU
/*
* Note: we wish to call __flush_whole_cache but we need to preserve
@@ -464,6 +468,7 @@ ENTRY(cpu_feroceon_switch_mm)
#else
ret lr
#endif
+SYM_FUNC_END(cpu_feroceon_switch_mm)
/*
* cpu_feroceon_set_pte_ext(ptep, pte, ext)
@@ -471,7 +476,7 @@ ENTRY(cpu_feroceon_switch_mm)
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_feroceon_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_feroceon_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext wc_disable=0
mov r0, r0
@@ -483,21 +488,22 @@ ENTRY(cpu_feroceon_set_pte_ext)
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif
ret lr
+SYM_FUNC_END(cpu_feroceon_set_pte_ext)
/* Suspend/resume support: taken from arch/arm/mm/proc-arm926.S */
.globl cpu_feroceon_suspend_size
.equ cpu_feroceon_suspend_size, 4 * 3
#ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_feroceon_do_suspend)
+SYM_TYPED_FUNC_START(cpu_feroceon_do_suspend)
stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID
mrc p15, 0, r5, c3, c0, 0 @ Domain ID
mrc p15, 0, r6, c1, c0, 0 @ Control register
stmia r0, {r4 - r6}
ldmfd sp!, {r4 - r6, pc}
-ENDPROC(cpu_feroceon_do_suspend)
+SYM_FUNC_END(cpu_feroceon_do_suspend)
-ENTRY(cpu_feroceon_do_resume)
+SYM_TYPED_FUNC_START(cpu_feroceon_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
@@ -507,7 +513,7 @@ ENTRY(cpu_feroceon_do_resume)
mcr p15, 0, r1, c2, c0, 0 @ TTB address
mov r0, r6 @ control register
b cpu_resume_mmu
-ENDPROC(cpu_feroceon_do_resume)
+SYM_FUNC_END(cpu_feroceon_do_resume)
#endif
.type __feroceon_setup, #function
@@ -32,18 +32,20 @@
/*
* cpu_mohawk_proc_init()
*/
-ENTRY(cpu_mohawk_proc_init)
+SYM_TYPED_FUNC_START(cpu_mohawk_proc_init)
ret lr
+SYM_FUNC_END(cpu_mohawk_proc_init)
/*
* cpu_mohawk_proc_fin()
*/
-ENTRY(cpu_mohawk_proc_fin)
+SYM_TYPED_FUNC_START(cpu_mohawk_proc_fin)
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1800 @ ...iz...........
bic r0, r0, #0x0006 @ .............ca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
+SYM_FUNC_END(cpu_mohawk_proc_fin)
/*
* cpu_mohawk_reset(loc)
@@ -58,7 +60,7 @@ ENTRY(cpu_mohawk_proc_fin)
*/
.align 5
.pushsection .idmap.text, "ax"
-ENTRY(cpu_mohawk_reset)
+SYM_TYPED_FUNC_START(cpu_mohawk_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
@@ -68,7 +70,7 @@ ENTRY(cpu_mohawk_reset)
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
ret r0
-ENDPROC(cpu_mohawk_reset)
+SYM_FUNC_END(cpu_mohawk_reset)
.popsection
/*
@@ -77,11 +79,12 @@ ENDPROC(cpu_mohawk_reset)
* Called with IRQs disabled
*/
.align 5
-ENTRY(cpu_mohawk_do_idle)
+SYM_TYPED_FUNC_START(cpu_mohawk_do_idle)
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt
ret lr
+SYM_FUNC_END(cpu_mohawk_do_idle)
/*
* flush_icache_all()
@@ -294,13 +297,14 @@ SYM_TYPED_FUNC_START(mohawk_dma_unmap_area)
ret lr
SYM_FUNC_END(mohawk_dma_unmap_area)
-ENTRY(cpu_mohawk_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_mohawk_dcache_clean_area)
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
subs r1, r1, #CACHE_DLINESIZE
bhi 1b
mcr p15, 0, r0, c7, c10, 4 @ drain WB
ret lr
+SYM_FUNC_END(cpu_mohawk_dcache_clean_area)
/*
* cpu_mohawk_switch_mm(pgd)
@@ -310,7 +314,7 @@ ENTRY(cpu_mohawk_dcache_clean_area)
* pgd: new page tables
*/
.align 5
-ENTRY(cpu_mohawk_switch_mm)
+SYM_TYPED_FUNC_START(cpu_mohawk_switch_mm)
mov ip, #0
mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
@@ -319,6 +323,7 @@ ENTRY(cpu_mohawk_switch_mm)
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
ret lr
+SYM_FUNC_END(cpu_mohawk_switch_mm)
/*
* cpu_mohawk_set_pte_ext(ptep, pte, ext)
@@ -326,7 +331,7 @@ ENTRY(cpu_mohawk_switch_mm)
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_mohawk_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_mohawk_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext
mov r0, r0
@@ -334,11 +339,12 @@ ENTRY(cpu_mohawk_set_pte_ext)
mcr p15, 0, r0, c7, c10, 4 @ drain WB
ret lr
#endif
+SYM_FUNC_END(cpu_mohawk_set_pte_ext)
.globl cpu_mohawk_suspend_size
.equ cpu_mohawk_suspend_size, 4 * 6
#ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_mohawk_do_suspend)
+SYM_TYPED_FUNC_START(cpu_mohawk_do_suspend)
stmfd sp!, {r4 - r9, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
mrc p15, 0, r5, c15, c1, 0 @ CP access reg
@@ -349,9 +355,9 @@ ENTRY(cpu_mohawk_do_suspend)
bic r4, r4, #2 @ clear frequency change bit
stmia r0, {r4 - r9} @ store cp regs
ldmia sp!, {r4 - r9, pc}
-ENDPROC(cpu_mohawk_do_suspend)
+SYM_FUNC_END(cpu_mohawk_do_suspend)
-ENTRY(cpu_mohawk_do_resume)
+SYM_TYPED_FUNC_START(cpu_mohawk_do_resume)
ldmia r0, {r4 - r9} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
@@ -367,7 +373,7 @@ ENTRY(cpu_mohawk_do_resume)
mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg
mov r0, r9 @ control register
b cpu_resume_mmu
-ENDPROC(cpu_mohawk_do_resume)
+SYM_FUNC_END(cpu_mohawk_do_resume)
#endif
.type __mohawk_setup, #function
@@ -12,6 +12,7 @@
*/
#include <linux/linkage.h>
#include <linux/init.h>
+#include <linux/cfi_types.h>
#include <linux/pgtable.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
@@ -32,15 +33,16 @@
/*
* cpu_sa110_proc_init()
*/
-ENTRY(cpu_sa110_proc_init)
+SYM_TYPED_FUNC_START(cpu_sa110_proc_init)
mov r0, #0
mcr p15, 0, r0, c15, c1, 2 @ Enable clock switching
ret lr
+SYM_FUNC_END(cpu_sa110_proc_init)
/*
* cpu_sa110_proc_fin()
*/
-ENTRY(cpu_sa110_proc_fin)
+SYM_TYPED_FUNC_START(cpu_sa110_proc_fin)
mov r0, #0
mcr p15, 0, r0, c15, c2, 2 @ Disable clock switching
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
@@ -48,6 +50,7 @@ ENTRY(cpu_sa110_proc_fin)
bic r0, r0, #0x000e @ ............wca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
+SYM_FUNC_END(cpu_sa110_proc_fin)
/*
* cpu_sa110_reset(loc)
@@ -60,7 +63,7 @@ ENTRY(cpu_sa110_proc_fin)
*/
.align 5
.pushsection .idmap.text, "ax"
-ENTRY(cpu_sa110_reset)
+SYM_TYPED_FUNC_START(cpu_sa110_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
@@ -72,7 +75,7 @@ ENTRY(cpu_sa110_reset)
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
ret r0
-ENDPROC(cpu_sa110_reset)
+SYM_FUNC_END(cpu_sa110_reset)
.popsection
/*
@@ -88,7 +91,7 @@ ENDPROC(cpu_sa110_reset)
*/
.align 5
-ENTRY(cpu_sa110_do_idle)
+SYM_TYPED_FUNC_START(cpu_sa110_do_idle)
mcr p15, 0, ip, c15, c2, 2 @ disable clock switching
ldr r1, =UNCACHEABLE_ADDR @ load from uncacheable loc
ldr r1, [r1, #0] @ force switch to MCLK
@@ -101,6 +104,7 @@ ENTRY(cpu_sa110_do_idle)
mov r0, r0 @ safety
mcr p15, 0, r0, c15, c1, 2 @ enable clock switching
ret lr
+SYM_FUNC_END(cpu_sa110_do_idle)
/* ================================= CACHE ================================ */
@@ -113,12 +117,13 @@ ENTRY(cpu_sa110_do_idle)
* addr: cache-unaligned virtual address
*/
.align 5
-ENTRY(cpu_sa110_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_sa110_dcache_clean_area)
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #DCACHELINESIZE
subs r1, r1, #DCACHELINESIZE
bhi 1b
ret lr
+SYM_FUNC_END(cpu_sa110_dcache_clean_area)
/* =============================== PageTable ============================== */
@@ -130,7 +135,7 @@ ENTRY(cpu_sa110_dcache_clean_area)
* pgd: new page tables
*/
.align 5
-ENTRY(cpu_sa110_switch_mm)
+SYM_TYPED_FUNC_START(cpu_sa110_switch_mm)
#ifdef CONFIG_MMU
str lr, [sp, #-4]!
bl v4wb_flush_kern_cache_all @ clears IP
@@ -140,6 +145,7 @@ ENTRY(cpu_sa110_switch_mm)
#else
ret lr
#endif
+SYM_FUNC_END(cpu_sa110_switch_mm)
/*
* cpu_sa110_set_pte_ext(ptep, pte, ext)
@@ -147,7 +153,7 @@ ENTRY(cpu_sa110_switch_mm)
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_sa110_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_sa110_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext wc_disable=0
mov r0, r0
@@ -155,6 +161,7 @@ ENTRY(cpu_sa110_set_pte_ext)
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif
ret lr
+SYM_FUNC_END(cpu_sa110_set_pte_ext)
.type __sa110_setup, #function
__sa110_setup:
@@ -17,6 +17,7 @@
*/
#include <linux/linkage.h>
#include <linux/init.h>
+#include <linux/cfi_types.h>
#include <linux/pgtable.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
@@ -36,11 +37,12 @@
/*
* cpu_sa1100_proc_init()
*/
-ENTRY(cpu_sa1100_proc_init)
+SYM_TYPED_FUNC_START(cpu_sa1100_proc_init)
mov r0, #0
mcr p15, 0, r0, c15, c1, 2 @ Enable clock switching
mcr p15, 0, r0, c9, c0, 5 @ Allow read-buffer operations from userland
ret lr
+SYM_FUNC_END(cpu_sa1100_proc_init)
/*
* cpu_sa1100_proc_fin()
@@ -49,13 +51,14 @@ ENTRY(cpu_sa1100_proc_init)
* - Disable interrupts
* - Clean and turn off caches.
*/
-ENTRY(cpu_sa1100_proc_fin)
+SYM_TYPED_FUNC_START(cpu_sa1100_proc_fin)
mcr p15, 0, ip, c15, c2, 2 @ Disable clock switching
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x000e @ ............wca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
+SYM_FUNC_END(cpu_sa1100_proc_fin)
/*
* cpu_sa1100_reset(loc)
@@ -68,7 +71,7 @@ ENTRY(cpu_sa1100_proc_fin)
*/
.align 5
.pushsection .idmap.text, "ax"
-ENTRY(cpu_sa1100_reset)
+SYM_TYPED_FUNC_START(cpu_sa1100_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
@@ -80,7 +83,7 @@ ENTRY(cpu_sa1100_reset)
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
ret r0
-ENDPROC(cpu_sa1100_reset)
+SYM_FUNC_END(cpu_sa1100_reset)
.popsection
/*
@@ -95,7 +98,7 @@ ENDPROC(cpu_sa1100_reset)
* 3 = switch to fast processor clock
*/
.align 5
-ENTRY(cpu_sa1100_do_idle)
+SYM_TYPED_FUNC_START(cpu_sa1100_do_idle)
mov r0, r0 @ 4 nop padding
mov r0, r0
mov r0, r0
@@ -111,6 +114,7 @@ ENTRY(cpu_sa1100_do_idle)
mov r0, r0 @ safety
mcr p15, 0, r0, c15, c1, 2 @ enable clock switching
ret lr
+SYM_FUNC_END(cpu_sa1100_do_idle)
/* ================================= CACHE ================================ */
@@ -123,12 +127,13 @@ ENTRY(cpu_sa1100_do_idle)
* addr: cache-unaligned virtual address
*/
.align 5
-ENTRY(cpu_sa1100_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_sa1100_dcache_clean_area)
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #DCACHELINESIZE
subs r1, r1, #DCACHELINESIZE
bhi 1b
ret lr
+SYM_FUNC_END(cpu_sa1100_dcache_clean_area)
/* =============================== PageTable ============================== */
@@ -140,7 +145,7 @@ ENTRY(cpu_sa1100_dcache_clean_area)
* pgd: new page tables
*/
.align 5
-ENTRY(cpu_sa1100_switch_mm)
+SYM_TYPED_FUNC_START(cpu_sa1100_switch_mm)
#ifdef CONFIG_MMU
str lr, [sp, #-4]!
bl v4wb_flush_kern_cache_all @ clears IP
@@ -151,6 +156,7 @@ ENTRY(cpu_sa1100_switch_mm)
#else
ret lr
#endif
+SYM_FUNC_END(cpu_sa1100_switch_mm)
/*
* cpu_sa1100_set_pte_ext(ptep, pte, ext)
@@ -158,7 +164,7 @@ ENTRY(cpu_sa1100_switch_mm)
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_sa1100_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_sa1100_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext wc_disable=0
mov r0, r0
@@ -166,20 +172,21 @@ ENTRY(cpu_sa1100_set_pte_ext)
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif
ret lr
+SYM_FUNC_END(cpu_sa1100_set_pte_ext)
.globl cpu_sa1100_suspend_size
.equ cpu_sa1100_suspend_size, 4 * 3
#ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_sa1100_do_suspend)
+SYM_TYPED_FUNC_START(cpu_sa1100_do_suspend)
stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c3, c0, 0 @ domain ID
mrc p15, 0, r5, c13, c0, 0 @ PID
mrc p15, 0, r6, c1, c0, 0 @ control reg
stmia r0, {r4 - r6} @ store cp regs
ldmfd sp!, {r4 - r6, pc}
-ENDPROC(cpu_sa1100_do_suspend)
+SYM_FUNC_END(cpu_sa1100_do_suspend)
-ENTRY(cpu_sa1100_do_resume)
+SYM_TYPED_FUNC_START(cpu_sa1100_do_resume)
ldmia r0, {r4 - r6} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ flush I+D TLBs
@@ -192,7 +199,7 @@ ENTRY(cpu_sa1100_do_resume)
mcr p15, 0, r5, c13, c0, 0 @ PID
mov r0, r6 @ control register
b cpu_resume_mmu
-ENDPROC(cpu_sa1100_do_resume)
+SYM_FUNC_END(cpu_sa1100_do_resume)
#endif
.type __sa1100_setup, #function
@@ -8,6 +8,7 @@
* This is the "shell" of the ARMv6 processor support.
*/
#include <linux/init.h>
+#include <linux/cfi_types.h>
#include <linux/linkage.h>
#include <linux/pgtable.h>
#include <asm/assembler.h>
@@ -34,15 +35,17 @@
.arch armv6
-ENTRY(cpu_v6_proc_init)
+SYM_TYPED_FUNC_START(cpu_v6_proc_init)
ret lr
+SYM_FUNC_END(cpu_v6_proc_init)
-ENTRY(cpu_v6_proc_fin)
+SYM_TYPED_FUNC_START(cpu_v6_proc_fin)
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x0006 @ .............ca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
+SYM_FUNC_END(cpu_v6_proc_fin)
/*
* cpu_v6_reset(loc)
@@ -55,14 +58,14 @@ ENTRY(cpu_v6_proc_fin)
*/
.align 5
.pushsection .idmap.text, "ax"
-ENTRY(cpu_v6_reset)
+SYM_TYPED_FUNC_START(cpu_v6_reset)
mrc p15, 0, r1, c1, c0, 0 @ ctrl register
bic r1, r1, #0x1 @ ...............m
mcr p15, 0, r1, c1, c0, 0 @ disable MMU
mov r1, #0
mcr p15, 0, r1, c7, c5, 4 @ ISB
ret r0
-ENDPROC(cpu_v6_reset)
+SYM_FUNC_END(cpu_v6_reset)
.popsection
/*
@@ -72,18 +75,20 @@ ENDPROC(cpu_v6_reset)
*
* IRQs are already disabled.
*/
-ENTRY(cpu_v6_do_idle)
+SYM_TYPED_FUNC_START(cpu_v6_do_idle)
mov r1, #0
mcr p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode
mcr p15, 0, r1, c7, c0, 4 @ wait for interrupt
ret lr
+SYM_FUNC_END(cpu_v6_do_idle)
-ENTRY(cpu_v6_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_v6_dcache_clean_area)
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #D_CACHE_LINE_SIZE
subs r1, r1, #D_CACHE_LINE_SIZE
bhi 1b
ret lr
+SYM_FUNC_END(cpu_v6_dcache_clean_area)
/*
* cpu_v6_switch_mm(pgd_phys, tsk)
@@ -95,7 +100,7 @@ ENTRY(cpu_v6_dcache_clean_area)
* It is assumed that:
* - we are not using split page tables
*/
-ENTRY(cpu_v6_switch_mm)
+SYM_TYPED_FUNC_START(cpu_v6_switch_mm)
#ifdef CONFIG_MMU
mov r2, #0
mmid r1, r1 @ get mm->context.id
@@ -113,6 +118,7 @@ ENTRY(cpu_v6_switch_mm)
mcr p15, 0, r1, c13, c0, 1 @ set context ID
#endif
ret lr
+SYM_FUNC_END(cpu_v6_switch_mm)
/*
* cpu_v6_set_pte_ext(ptep, pte, ext)
@@ -126,17 +132,18 @@ ENTRY(cpu_v6_switch_mm)
*/
armv6_mt_table cpu_v6
-ENTRY(cpu_v6_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_v6_set_pte_ext)
#ifdef CONFIG_MMU
armv6_set_pte_ext cpu_v6
#endif
ret lr
+SYM_FUNC_END(cpu_v6_set_pte_ext)
/* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
.globl cpu_v6_suspend_size
.equ cpu_v6_suspend_size, 4 * 6
#ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_v6_do_suspend)
+SYM_TYPED_FUNC_START(cpu_v6_do_suspend)
stmfd sp!, {r4 - r9, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
#ifdef CONFIG_MMU
@@ -148,9 +155,9 @@ ENTRY(cpu_v6_do_suspend)
mrc p15, 0, r9, c1, c0, 0 @ control register
stmia r0, {r4 - r9}
ldmfd sp!, {r4- r9, pc}
-ENDPROC(cpu_v6_do_suspend)
+SYM_FUNC_END(cpu_v6_do_suspend)
-ENTRY(cpu_v6_do_resume)
+SYM_TYPED_FUNC_START(cpu_v6_do_resume)
mov ip, #0
mcr p15, 0, ip, c7, c14, 0 @ clean+invalidate D cache
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
@@ -172,7 +179,7 @@ ENTRY(cpu_v6_do_resume)
mcr p15, 0, ip, c7, c5, 4 @ ISB
mov r0, r9 @ control register
b cpu_resume_mmu
-ENDPROC(cpu_v6_do_resume)
+SYM_FUNC_END(cpu_v6_do_resume)
#endif
string cpu_v6_name, "ARMv6-compatible processor"
@@ -40,7 +40,7 @@
* even on Cortex-A8 revisions not affected by 430973.
* If IBE is not set, the flush BTAC/BTB won't do anything.
*/
-ENTRY(cpu_v7_switch_mm)
+SYM_TYPED_FUNC_START(cpu_v7_switch_mm)
#ifdef CONFIG_MMU
mmid r1, r1 @ get mm->context.id
ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP)
@@ -59,7 +59,7 @@ ENTRY(cpu_v7_switch_mm)
isb
#endif
bx lr
-ENDPROC(cpu_v7_switch_mm)
+SYM_FUNC_END(cpu_v7_switch_mm)
/*
* cpu_v7_set_pte_ext(ptep, pte)
@@ -71,7 +71,7 @@ ENDPROC(cpu_v7_switch_mm)
* - pte - PTE value to store
* - ext - value for extended PTE bits
*/
-ENTRY(cpu_v7_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_v7_set_pte_ext)
#ifdef CONFIG_MMU
str r1, [r0] @ linux version
@@ -106,7 +106,7 @@ ENTRY(cpu_v7_set_pte_ext)
ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte
#endif
bx lr
-ENDPROC(cpu_v7_set_pte_ext)
+SYM_FUNC_END(cpu_v7_set_pte_ext)
/*
* Memory region attributes with SCTLR.TRE=1
@@ -42,7 +42,7 @@
* Set the translation table base pointer to be pgd_phys (physical address of
* the new TTB).
*/
-ENTRY(cpu_v7_switch_mm)
+SYM_TYPED_FUNC_START(cpu_v7_switch_mm)
#ifdef CONFIG_MMU
mmid r2, r2
asid r2, r2
@@ -51,7 +51,7 @@ ENTRY(cpu_v7_switch_mm)
isb
#endif
ret lr
-ENDPROC(cpu_v7_switch_mm)
+SYM_FUNC_END(cpu_v7_switch_mm)
#ifdef __ARMEB__
#define rl r3
@@ -68,7 +68,7 @@ ENDPROC(cpu_v7_switch_mm)
* - ptep - pointer to level 3 translation table entry
* - pte - PTE value to store (64-bit in r2 and r3)
*/
-ENTRY(cpu_v7_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_v7_set_pte_ext)
#ifdef CONFIG_MMU
tst rl, #L_PTE_VALID
beq 1f
@@ -87,7 +87,7 @@ ENTRY(cpu_v7_set_pte_ext)
ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte
#endif
ret lr
-ENDPROC(cpu_v7_set_pte_ext)
+SYM_FUNC_END(cpu_v7_set_pte_ext)
/*
* Memory region attributes for LPAE (defined in pgtable-3level.h):
@@ -7,6 +7,7 @@
* This is the "shell" of the ARMv7 processor support.
*/
#include <linux/arm-smccc.h>
+#include <linux/cfi_types.h>
#include <linux/init.h>
#include <linux/linkage.h>
#include <linux/pgtable.h>
@@ -26,17 +27,17 @@
.arch armv7-a
-ENTRY(cpu_v7_proc_init)
+SYM_TYPED_FUNC_START(cpu_v7_proc_init)
ret lr
-ENDPROC(cpu_v7_proc_init)
+SYM_FUNC_END(cpu_v7_proc_init)
-ENTRY(cpu_v7_proc_fin)
+SYM_TYPED_FUNC_START(cpu_v7_proc_fin)
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x0006 @ .............ca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
-ENDPROC(cpu_v7_proc_fin)
+SYM_FUNC_END(cpu_v7_proc_fin)
/*
* cpu_v7_reset(loc, hyp)
@@ -53,7 +54,7 @@ ENDPROC(cpu_v7_proc_fin)
*/
.align 5
.pushsection .idmap.text, "ax"
-ENTRY(cpu_v7_reset)
+SYM_TYPED_FUNC_START(cpu_v7_reset)
mrc p15, 0, r2, c1, c0, 0 @ ctrl register
bic r2, r2, #0x1 @ ...............m
THUMB( bic r2, r2, #1 << 30 ) @ SCTLR.TE (Thumb exceptions)
@@ -64,7 +65,7 @@ ENTRY(cpu_v7_reset)
bne __hyp_soft_restart
#endif
bx r0
-ENDPROC(cpu_v7_reset)
+SYM_FUNC_END(cpu_v7_reset)
.popsection
/*
@@ -74,13 +75,13 @@ ENDPROC(cpu_v7_reset)
*
* IRQs are already disabled.
*/
-ENTRY(cpu_v7_do_idle)
+SYM_TYPED_FUNC_START(cpu_v7_do_idle)
dsb @ WFI may enter a low-power mode
wfi
ret lr
-ENDPROC(cpu_v7_do_idle)
+SYM_FUNC_END(cpu_v7_do_idle)
-ENTRY(cpu_v7_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_v7_dcache_clean_area)
ALT_SMP(W(nop)) @ MP extensions imply L1 PTW
ALT_UP_B(1f)
ret lr
@@ -91,38 +92,39 @@ ENTRY(cpu_v7_dcache_clean_area)
bhi 2b
dsb ishst
ret lr
-ENDPROC(cpu_v7_dcache_clean_area)
+SYM_FUNC_END(cpu_v7_dcache_clean_area)
#ifdef CONFIG_ARM_PSCI
.arch_extension sec
-ENTRY(cpu_v7_smc_switch_mm)
+SYM_TYPED_FUNC_START(cpu_v7_smc_switch_mm)
stmfd sp!, {r0 - r3}
movw r0, #:lower16:ARM_SMCCC_ARCH_WORKAROUND_1
movt r0, #:upper16:ARM_SMCCC_ARCH_WORKAROUND_1
smc #0
ldmfd sp!, {r0 - r3}
b cpu_v7_switch_mm
-ENDPROC(cpu_v7_smc_switch_mm)
+SYM_FUNC_END(cpu_v7_smc_switch_mm)
.arch_extension virt
-ENTRY(cpu_v7_hvc_switch_mm)
+SYM_TYPED_FUNC_START(cpu_v7_hvc_switch_mm)
stmfd sp!, {r0 - r3}
movw r0, #:lower16:ARM_SMCCC_ARCH_WORKAROUND_1
movt r0, #:upper16:ARM_SMCCC_ARCH_WORKAROUND_1
hvc #0
ldmfd sp!, {r0 - r3}
b cpu_v7_switch_mm
-ENDPROC(cpu_v7_hvc_switch_mm)
+SYM_FUNC_END(cpu_v7_hvc_switch_mm)
#endif
-ENTRY(cpu_v7_iciallu_switch_mm)
+
+SYM_TYPED_FUNC_START(cpu_v7_iciallu_switch_mm)
mov r3, #0
mcr p15, 0, r3, c7, c5, 0 @ ICIALLU
b cpu_v7_switch_mm
-ENDPROC(cpu_v7_iciallu_switch_mm)
-ENTRY(cpu_v7_bpiall_switch_mm)
+SYM_FUNC_END(cpu_v7_iciallu_switch_mm)
+SYM_TYPED_FUNC_START(cpu_v7_bpiall_switch_mm)
mov r3, #0
mcr p15, 0, r3, c7, c5, 6 @ flush BTAC/BTB
b cpu_v7_switch_mm
-ENDPROC(cpu_v7_bpiall_switch_mm)
+SYM_FUNC_END(cpu_v7_bpiall_switch_mm)
string cpu_v7_name, "ARMv7 Processor"
.align
@@ -131,7 +133,7 @@ ENDPROC(cpu_v7_bpiall_switch_mm)
.globl cpu_v7_suspend_size
.equ cpu_v7_suspend_size, 4 * 9
#ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_v7_do_suspend)
+SYM_TYPED_FUNC_START(cpu_v7_do_suspend)
stmfd sp!, {r4 - r11, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
mrc p15, 0, r5, c13, c0, 3 @ User r/o thread ID
@@ -150,9 +152,9 @@ ENTRY(cpu_v7_do_suspend)
mrc p15, 0, r10, c1, c0, 2 @ Co-processor access control
stmia r0, {r5 - r11}
ldmfd sp!, {r4 - r11, pc}
-ENDPROC(cpu_v7_do_suspend)
+SYM_FUNC_END(cpu_v7_do_suspend)
-ENTRY(cpu_v7_do_resume)
+SYM_TYPED_FUNC_START(cpu_v7_do_resume)
mov ip, #0
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID
@@ -186,22 +188,22 @@ ENTRY(cpu_v7_do_resume)
dsb
mov r0, r8 @ control register
b cpu_resume_mmu
-ENDPROC(cpu_v7_do_resume)
+SYM_FUNC_END(cpu_v7_do_resume)
#endif
.globl cpu_ca9mp_suspend_size
.equ cpu_ca9mp_suspend_size, cpu_v7_suspend_size + 4 * 2
#ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_ca9mp_do_suspend)
+SYM_TYPED_FUNC_START(cpu_ca9mp_do_suspend)
stmfd sp!, {r4 - r5}
mrc p15, 0, r4, c15, c0, 1 @ Diagnostic register
mrc p15, 0, r5, c15, c0, 0 @ Power register
stmia r0!, {r4 - r5}
ldmfd sp!, {r4 - r5}
b cpu_v7_do_suspend
-ENDPROC(cpu_ca9mp_do_suspend)
+SYM_FUNC_END(cpu_ca9mp_do_suspend)
-ENTRY(cpu_ca9mp_do_resume)
+SYM_TYPED_FUNC_START(cpu_ca9mp_do_resume)
ldmia r0!, {r4 - r5}
mrc p15, 0, r10, c15, c0, 1 @ Read Diagnostic register
teq r4, r10 @ Already restored?
@@ -210,7 +212,7 @@ ENTRY(cpu_ca9mp_do_resume)
teq r5, r10 @ Already restored?
mcrne p15, 0, r5, c15, c0, 0 @ No, so restore it
b cpu_v7_do_resume
-ENDPROC(cpu_ca9mp_do_resume)
+SYM_FUNC_END(cpu_ca9mp_do_resume)
#endif
#ifdef CONFIG_CPU_PJ4B
@@ -220,18 +222,18 @@ ENDPROC(cpu_ca9mp_do_resume)
globl_equ cpu_pj4b_proc_fin, cpu_v7_proc_fin
globl_equ cpu_pj4b_reset, cpu_v7_reset
#ifdef CONFIG_PJ4B_ERRATA_4742
-ENTRY(cpu_pj4b_do_idle)
+SYM_TYPED_FUNC_START(cpu_pj4b_do_idle)
dsb @ WFI may enter a low-power mode
wfi
dsb @barrier
ret lr
-ENDPROC(cpu_pj4b_do_idle)
+SYM_FUNC_END(cpu_pj4b_do_idle)
#else
globl_equ cpu_pj4b_do_idle, cpu_v7_do_idle
#endif
globl_equ cpu_pj4b_dcache_clean_area, cpu_v7_dcache_clean_area
#ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_pj4b_do_suspend)
+SYM_TYPED_FUNC_START(cpu_pj4b_do_suspend)
stmfd sp!, {r6 - r10}
mrc p15, 1, r6, c15, c1, 0 @ save CP15 - extra features
mrc p15, 1, r7, c15, c2, 0 @ save CP15 - Aux Func Modes Ctrl 0
@@ -241,9 +243,9 @@ ENTRY(cpu_pj4b_do_suspend)
stmia r0!, {r6 - r10}
ldmfd sp!, {r6 - r10}
b cpu_v7_do_suspend
-ENDPROC(cpu_pj4b_do_suspend)
+SYM_FUNC_END(cpu_pj4b_do_suspend)
-ENTRY(cpu_pj4b_do_resume)
+SYM_TYPED_FUNC_START(cpu_pj4b_do_resume)
ldmia r0!, {r6 - r10}
mcr p15, 1, r6, c15, c1, 0 @ restore CP15 - extra features
mcr p15, 1, r7, c15, c2, 0 @ restore CP15 - Aux Func Modes Ctrl 0
@@ -251,7 +253,7 @@ ENTRY(cpu_pj4b_do_resume)
mcr p15, 1, r9, c15, c1, 1 @ restore CP15 - Aux Debug Modes Ctrl 1
mcr p15, 0, r10, c9, c14, 0 @ restore CP15 - PMC
b cpu_v7_do_resume
-ENDPROC(cpu_pj4b_do_resume)
+SYM_FUNC_END(cpu_pj4b_do_resume)
#endif
.globl cpu_pj4b_suspend_size
.equ cpu_pj4b_suspend_size, cpu_v7_suspend_size + 4 * 5
@@ -8,18 +8,19 @@
* This is the "shell" of the ARMv7-M processor support.
*/
#include <linux/linkage.h>
+#include <linux/cfi_types.h>
#include <asm/assembler.h>
#include <asm/page.h>
#include <asm/v7m.h>
#include "proc-macros.S"
-ENTRY(cpu_v7m_proc_init)
+SYM_TYPED_FUNC_START(cpu_v7m_proc_init)
ret lr
-ENDPROC(cpu_v7m_proc_init)
+SYM_FUNC_END(cpu_v7m_proc_init)
-ENTRY(cpu_v7m_proc_fin)
+SYM_TYPED_FUNC_START(cpu_v7m_proc_fin)
ret lr
-ENDPROC(cpu_v7m_proc_fin)
+SYM_FUNC_END(cpu_v7m_proc_fin)
/*
* cpu_v7m_reset(loc)
@@ -31,9 +32,9 @@ ENDPROC(cpu_v7m_proc_fin)
* - loc - location to jump to for soft reset
*/
.align 5
-ENTRY(cpu_v7m_reset)
+SYM_TYPED_FUNC_START(cpu_v7m_reset)
ret r0
-ENDPROC(cpu_v7m_reset)
+SYM_FUNC_END(cpu_v7m_reset)
/*
* cpu_v7m_do_idle()
@@ -42,36 +43,36 @@ ENDPROC(cpu_v7m_reset)
*
* IRQs are already disabled.
*/
-ENTRY(cpu_v7m_do_idle)
+SYM_TYPED_FUNC_START(cpu_v7m_do_idle)
wfi
ret lr
-ENDPROC(cpu_v7m_do_idle)
+SYM_FUNC_END(cpu_v7m_do_idle)
-ENTRY(cpu_v7m_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_v7m_dcache_clean_area)
ret lr
-ENDPROC(cpu_v7m_dcache_clean_area)
+SYM_FUNC_END(cpu_v7m_dcache_clean_area)
/*
* There is no MMU, so here is nothing to do.
*/
-ENTRY(cpu_v7m_switch_mm)
+SYM_TYPED_FUNC_START(cpu_v7m_switch_mm)
ret lr
-ENDPROC(cpu_v7m_switch_mm)
+SYM_FUNC_END(cpu_v7m_switch_mm)
.globl cpu_v7m_suspend_size
.equ cpu_v7m_suspend_size, 0
#ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_v7m_do_suspend)
+SYM_TYPED_FUNC_START(cpu_v7m_do_suspend)
ret lr
-ENDPROC(cpu_v7m_do_suspend)
+SYM_FUNC_END(cpu_v7m_do_suspend)
-ENTRY(cpu_v7m_do_resume)
+SYM_TYPED_FUNC_START(cpu_v7m_do_resume)
ret lr
-ENDPROC(cpu_v7m_do_resume)
+SYM_FUNC_END(cpu_v7m_do_resume)
#endif
-ENTRY(cpu_cm7_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_cm7_dcache_clean_area)
dcache_line_size r2, r3
movw r3, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_DCCMVAC
movt r3, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_DCCMVAC
@@ -82,16 +83,16 @@ ENTRY(cpu_cm7_dcache_clean_area)
bhi 1b
dsb
ret lr
-ENDPROC(cpu_cm7_dcache_clean_area)
+SYM_FUNC_END(cpu_cm7_dcache_clean_area)
-ENTRY(cpu_cm7_proc_fin)
+SYM_TYPED_FUNC_START(cpu_cm7_proc_fin)
movw r2, #:lower16:(BASEADDR_V7M_SCB + V7M_SCB_CCR)
movt r2, #:upper16:(BASEADDR_V7M_SCB + V7M_SCB_CCR)
ldr r0, [r2]
bic r0, r0, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC)
str r0, [r2]
ret lr
-ENDPROC(cpu_cm7_proc_fin)
+SYM_FUNC_END(cpu_cm7_proc_fin)
.section ".init.text", "ax"
@@ -80,18 +80,20 @@
*
* Nothing too exciting at the moment
*/
-ENTRY(cpu_xsc3_proc_init)
+SYM_TYPED_FUNC_START(cpu_xsc3_proc_init)
ret lr
+SYM_FUNC_END(cpu_xsc3_proc_init)
/*
* cpu_xsc3_proc_fin()
*/
-ENTRY(cpu_xsc3_proc_fin)
+SYM_TYPED_FUNC_START(cpu_xsc3_proc_fin)
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1800 @ ...IZ...........
bic r0, r0, #0x0006 @ .............CA.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
+SYM_FUNC_END(cpu_xsc3_proc_fin)
/*
* cpu_xsc3_reset(loc)
@@ -104,7 +106,7 @@ ENTRY(cpu_xsc3_proc_fin)
*/
.align 5
.pushsection .idmap.text, "ax"
-ENTRY(cpu_xsc3_reset)
+SYM_TYPED_FUNC_START(cpu_xsc3_reset)
mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
msr cpsr_c, r1 @ reset CPSR
mrc p15, 0, r1, c1, c0, 0 @ ctrl register
@@ -118,7 +120,7 @@ ENTRY(cpu_xsc3_reset)
@ already containing those two last instructions to survive.
mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs
ret r0
-ENDPROC(cpu_xsc3_reset)
+SYM_FUNC_END(cpu_xsc3_reset)
.popsection
/*
@@ -133,10 +135,11 @@ ENDPROC(cpu_xsc3_reset)
*/
.align 5
-ENTRY(cpu_xsc3_do_idle)
+SYM_TYPED_FUNC_START(cpu_xsc3_do_idle)
mov r0, #1
mcr p14, 0, r0, c7, c0, 0 @ go to idle
ret lr
+SYM_FUNC_END(cpu_xsc3_do_idle)
/* ================================= CACHE ================================ */
@@ -339,12 +342,13 @@ SYM_TYPED_FUNC_START(xsc3_dma_unmap_area)
ret lr
SYM_FUNC_END(xsc3_dma_unmap_area)
-ENTRY(cpu_xsc3_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_xsc3_dcache_clean_area)
1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line
add r0, r0, #CACHELINESIZE
subs r1, r1, #CACHELINESIZE
bhi 1b
ret lr
+SYM_FUNC_END(cpu_xsc3_dcache_clean_area)
/* =============================== PageTable ============================== */
@@ -356,7 +360,7 @@ ENTRY(cpu_xsc3_dcache_clean_area)
* pgd: new page tables
*/
.align 5
-ENTRY(cpu_xsc3_switch_mm)
+SYM_TYPED_FUNC_START(cpu_xsc3_switch_mm)
clean_d_cache r1, r2
mcr p15, 0, ip, c7, c5, 0 @ invalidate L1 I cache and BTB
mcr p15, 0, ip, c7, c10, 4 @ data write barrier
@@ -365,6 +369,7 @@ ENTRY(cpu_xsc3_switch_mm)
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs
cpwait_ret lr, ip
+SYM_FUNC_END(cpu_xsc3_switch_mm)
/*
* cpu_xsc3_set_pte_ext(ptep, pte, ext)
@@ -390,7 +395,7 @@ cpu_xsc3_mt_table:
.long 0x00 @ unused
.align 5
-ENTRY(cpu_xsc3_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_xsc3_set_pte_ext)
xscale_set_pte_ext_prologue
tst r1, #L_PTE_SHARED @ shared?
@@ -403,6 +408,7 @@ ENTRY(cpu_xsc3_set_pte_ext)
xscale_set_pte_ext_epilogue
ret lr
+SYM_FUNC_END(cpu_xsc3_set_pte_ext)
.ltorg
.align
@@ -410,7 +416,7 @@ ENTRY(cpu_xsc3_set_pte_ext)
.globl cpu_xsc3_suspend_size
.equ cpu_xsc3_suspend_size, 4 * 6
#ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_xsc3_do_suspend)
+SYM_TYPED_FUNC_START(cpu_xsc3_do_suspend)
stmfd sp!, {r4 - r9, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
mrc p15, 0, r5, c15, c1, 0 @ CP access reg
@@ -421,9 +427,9 @@ ENTRY(cpu_xsc3_do_suspend)
bic r4, r4, #2 @ clear frequency change bit
stmia r0, {r4 - r9} @ store cp regs
ldmia sp!, {r4 - r9, pc}
-ENDPROC(cpu_xsc3_do_suspend)
+SYM_FUNC_END(cpu_xsc3_do_suspend)
-ENTRY(cpu_xsc3_do_resume)
+SYM_TYPED_FUNC_START(cpu_xsc3_do_resume)
ldmia r0, {r4 - r9} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
@@ -439,7 +445,7 @@ ENTRY(cpu_xsc3_do_resume)
mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg
mov r0, r9 @ control register
b cpu_resume_mmu
-ENDPROC(cpu_xsc3_do_resume)
+SYM_FUNC_END(cpu_xsc3_do_resume)
#endif
.type __xsc3_setup, #function
@@ -112,22 +112,24 @@ clean_addr: .word CLEAN_ADDR
*
* Nothing too exciting at the moment
*/
-ENTRY(cpu_xscale_proc_init)
+SYM_TYPED_FUNC_START(cpu_xscale_proc_init)
@ enable write buffer coalescing. Some bootloader disable it
mrc p15, 0, r1, c1, c0, 1
bic r1, r1, #1
mcr p15, 0, r1, c1, c0, 1
ret lr
+SYM_FUNC_END(cpu_xscale_proc_init)
/*
* cpu_xscale_proc_fin()
*/
-ENTRY(cpu_xscale_proc_fin)
+SYM_TYPED_FUNC_START(cpu_xscale_proc_fin)
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1800 @ ...IZ...........
bic r0, r0, #0x0006 @ .............CA.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
+SYM_FUNC_END(cpu_xscale_proc_fin)
/*
* cpu_xscale_reset(loc)
@@ -142,7 +144,7 @@ ENTRY(cpu_xscale_proc_fin)
*/
.align 5
.pushsection .idmap.text, "ax"
-ENTRY(cpu_xscale_reset)
+SYM_TYPED_FUNC_START(cpu_xscale_reset)
mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
msr cpsr_c, r1 @ reset CPSR
mcr p15, 0, r1, c10, c4, 1 @ unlock I-TLB
@@ -160,7 +162,7 @@ ENTRY(cpu_xscale_reset)
@ already containing those two last instructions to survive.
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
ret r0
-ENDPROC(cpu_xscale_reset)
+SYM_FUNC_END(cpu_xscale_reset)
.popsection
/*
@@ -175,10 +177,11 @@ ENDPROC(cpu_xscale_reset)
*/
.align 5
-ENTRY(cpu_xscale_do_idle)
+SYM_TYPED_FUNC_START(cpu_xscale_do_idle)
mov r0, #1
mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE
ret lr
+SYM_FUNC_END(cpu_xscale_do_idle)
/* ================================= CACHE ================================ */
@@ -428,12 +431,13 @@ SYM_TYPED_FUNC_START(xscale_dma_unmap_area)
ret lr
SYM_FUNC_END(xscale_dma_unmap_area)
-ENTRY(cpu_xscale_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_xscale_dcache_clean_area)
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHELINESIZE
subs r1, r1, #CACHELINESIZE
bhi 1b
ret lr
+SYM_FUNC_END(cpu_xscale_dcache_clean_area)
/* =============================== PageTable ============================== */
@@ -445,13 +449,14 @@ ENTRY(cpu_xscale_dcache_clean_area)
* pgd: new page tables
*/
.align 5
-ENTRY(cpu_xscale_switch_mm)
+SYM_TYPED_FUNC_START(cpu_xscale_switch_mm)
clean_d_cache r1, r2
mcr p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB
mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
cpwait_ret lr, ip
+SYM_FUNC_END(cpu_xscale_switch_mm)
/*
* cpu_xscale_set_pte_ext(ptep, pte, ext)
@@ -479,7 +484,7 @@ cpu_xscale_mt_table:
.long 0x00 @ unused
.align 5
-ENTRY(cpu_xscale_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_xscale_set_pte_ext)
xscale_set_pte_ext_prologue
@
@@ -497,6 +502,7 @@ ENTRY(cpu_xscale_set_pte_ext)
xscale_set_pte_ext_epilogue
ret lr
+SYM_FUNC_END(cpu_xscale_set_pte_ext)
.ltorg
.align
@@ -504,7 +510,7 @@ ENTRY(cpu_xscale_set_pte_ext)
.globl cpu_xscale_suspend_size
.equ cpu_xscale_suspend_size, 4 * 6
#ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_xscale_do_suspend)
+SYM_TYPED_FUNC_START(cpu_xscale_do_suspend)
stmfd sp!, {r4 - r9, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
mrc p15, 0, r5, c15, c1, 0 @ CP access reg
@@ -515,9 +521,9 @@ ENTRY(cpu_xscale_do_suspend)
bic r4, r4, #2 @ clear frequency change bit
stmia r0, {r4 - r9} @ store cp regs
ldmfd sp!, {r4 - r9, pc}
-ENDPROC(cpu_xscale_do_suspend)
+SYM_FUNC_END(cpu_xscale_do_suspend)
-ENTRY(cpu_xscale_do_resume)
+SYM_TYPED_FUNC_START(cpu_xscale_do_resume)
ldmia r0, {r4 - r9} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
@@ -530,7 +536,7 @@ ENTRY(cpu_xscale_do_resume)
mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg
mov r0, r9 @ control register
b cpu_resume_mmu
-ENDPROC(cpu_xscale_do_resume)
+SYM_FUNC_END(cpu_xscale_do_resume)
#endif
.type __xscale_setup, #function