| Message ID | 20240429112843.67628-4-wsa+renesas@sang-engineering.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | spi: use 'time_left' instead of 'timeout' with wait_for_*() functions | expand |
> Subject: [PATCH 3/8] spi: imx: use 'time_left' variable with > wait_for_completion_timeout() > > There is a confusing pattern in the kernel to use a variable named 'timeout' to > store the result of wait_for_completion_timeout() causing patterns like: > > timeout = wait_for_completion_timeout(...) > if (!timeout) return -ETIMEDOUT; > > with all kinds of permutations. Use 'time_left' as a variable to make the code > self explaining. > > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> > --- > drivers/spi/spi-imx.c | 20 ++++++++++---------- > 1 file changed, 10 insertions(+), 10 deletions(-) > > diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index > c3e5cee18bea..f4006c82f867 100644 > --- a/drivers/spi/spi-imx.c > +++ b/drivers/spi/spi-imx.c > @@ -1405,7 +1405,7 @@ static int spi_imx_dma_transfer(struct > spi_imx_data *spi_imx, { > struct dma_async_tx_descriptor *desc_tx, *desc_rx; > unsigned long transfer_timeout; > - unsigned long timeout; > + unsigned long time_left; > struct spi_controller *controller = spi_imx->controller; > struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg; > struct scatterlist *last_sg = sg_last(rx->sgl, rx->nents); @@ -1471,18 > +1471,18 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, > transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len); > > /* Wait SDMA to finish the data transfer.*/ > - timeout = wait_for_completion_timeout(&spi_imx- > >dma_tx_completion, > + time_left = wait_for_completion_timeout(&spi_imx- > >dma_tx_completion, > transfer_timeout); > - if (!timeout) { > + if (!time_left) { > dev_err(spi_imx->dev, "I/O Error in DMA TX\n"); > dmaengine_terminate_all(controller->dma_tx); > dmaengine_terminate_all(controller->dma_rx); > return -ETIMEDOUT; > } > > - timeout = wait_for_completion_timeout(&spi_imx- > >dma_rx_completion, > - transfer_timeout); > - if (!timeout) { > + time_left = wait_for_completion_timeout(&spi_imx- > >dma_rx_completion, > + transfer_timeout); > + if (!time_left) { > dev_err(&controller->dev, "I/O Error in DMA RX\n"); > spi_imx->devtype_data->reset(spi_imx); > dmaengine_terminate_all(controller->dma_rx); > @@ -1501,7 +1501,7 @@ static int spi_imx_pio_transfer(struct spi_device > *spi, { > struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi- > >controller); > unsigned long transfer_timeout; > - unsigned long timeout; > + unsigned long time_left; > > spi_imx->tx_buf = transfer->tx_buf; > spi_imx->rx_buf = transfer->rx_buf; > @@ -1517,9 +1517,9 @@ static int spi_imx_pio_transfer(struct spi_device > *spi, > > transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len); > > - timeout = wait_for_completion_timeout(&spi_imx->xfer_done, > - transfer_timeout); > - if (!timeout) { > + time_left = wait_for_completion_timeout(&spi_imx->xfer_done, > + transfer_timeout); > + if (!time_left) { > dev_err(&spi->dev, "I/O Error in PIO\n"); > spi_imx->devtype_data->reset(spi_imx); > return -ETIMEDOUT; > -- > 2.43.0 >
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index c3e5cee18bea..f4006c82f867 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -1405,7 +1405,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, { struct dma_async_tx_descriptor *desc_tx, *desc_rx; unsigned long transfer_timeout; - unsigned long timeout; + unsigned long time_left; struct spi_controller *controller = spi_imx->controller; struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg; struct scatterlist *last_sg = sg_last(rx->sgl, rx->nents); @@ -1471,18 +1471,18 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len); /* Wait SDMA to finish the data transfer.*/ - timeout = wait_for_completion_timeout(&spi_imx->dma_tx_completion, + time_left = wait_for_completion_timeout(&spi_imx->dma_tx_completion, transfer_timeout); - if (!timeout) { + if (!time_left) { dev_err(spi_imx->dev, "I/O Error in DMA TX\n"); dmaengine_terminate_all(controller->dma_tx); dmaengine_terminate_all(controller->dma_rx); return -ETIMEDOUT; } - timeout = wait_for_completion_timeout(&spi_imx->dma_rx_completion, - transfer_timeout); - if (!timeout) { + time_left = wait_for_completion_timeout(&spi_imx->dma_rx_completion, + transfer_timeout); + if (!time_left) { dev_err(&controller->dev, "I/O Error in DMA RX\n"); spi_imx->devtype_data->reset(spi_imx); dmaengine_terminate_all(controller->dma_rx); @@ -1501,7 +1501,7 @@ static int spi_imx_pio_transfer(struct spi_device *spi, { struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller); unsigned long transfer_timeout; - unsigned long timeout; + unsigned long time_left; spi_imx->tx_buf = transfer->tx_buf; spi_imx->rx_buf = transfer->rx_buf; @@ -1517,9 +1517,9 @@ static int spi_imx_pio_transfer(struct spi_device *spi, transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len); - timeout = wait_for_completion_timeout(&spi_imx->xfer_done, - transfer_timeout); - if (!timeout) { + time_left = wait_for_completion_timeout(&spi_imx->xfer_done, + transfer_timeout); + if (!time_left) { dev_err(&spi->dev, "I/O Error in PIO\n"); spi_imx->devtype_data->reset(spi_imx); return -ETIMEDOUT;
There is a confusing pattern in the kernel to use a variable named 'timeout' to store the result of wait_for_completion_timeout() causing patterns like: timeout = wait_for_completion_timeout(...) if (!timeout) return -ETIMEDOUT; with all kinds of permutations. Use 'time_left' as a variable to make the code self explaining. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> --- drivers/spi/spi-imx.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)