diff mbox series

[1/4] arm64: dts: ti: k3-j7200-main: Switch MAIN R5F cluster to Split-mode

Message ID 20240503062414.804209-2-b-padhi@ti.com (mailing list archive)
State New, archived
Headers show
Series Switch MAIN R5F clusters to Split-mode for TI SoCs | expand

Commit Message

Beleswar Prasad Padhi May 3, 2024, 6:24 a.m. UTC 
From: Suman Anna <s-anna@ti.com>

J7200 SoCs has a R5F cluster in each of the MAIN and MCU domains, and both
of these are configured for LockStep mode at the moment. Switch the MAIN
R5F cluster to Split mode by default to maximize the number of R5F cores.
The MCU R5F cluster continues to be in the preferred LockStep mode.

Note that this configuration is the default for remoteproc mode (kernel
driver boots the R5F processors). These will be overridden for early-booted
remoteprocs through the corresponding IPC-only support in the K3 R5F
remoteproc driver.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 9386bf3ef9f6..a369fa35612d 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -1486,7 +1486,7 @@  main_timer19: timer@2530000 {
 
 	main_r5fss0: r5fss@5c00000 {
 		compatible = "ti,j7200-r5fss";
-		ti,cluster-mode = <1>;
+		ti,cluster-mode = <0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,