| Message ID | 20240506113306.1283179-1-Delphine_CC_Chiu@wiwynn.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v1] ARM: dts: aspeed: yosemite4: add I3C config in DTS | expand |
On 06/05/2024 13:33, Delphine CC Chiu wrote: > Set I3C config in yosemite4 DTS. > > Test plan: > Tested with aspeed I3C patches and I3C hub driver. > > Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> > --- > .../aspeed/aspeed-bmc-facebook-yosemite4.dts | 86 +++++++++++++++++++ > 1 file changed, 86 insertions(+) > > diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > index 64075cc41d92..6a30c424d745 100644 > --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > @@ -595,6 +595,92 @@ i2c-mux@72 { > }; > }; > > +&i3c0 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i3c1_default>; > + i3c-pp-scl-hi-period-ns = <40>; > + i3c-pp-scl-lo-period-ns = <40>; > + i3c-od-scl-hi-period-ns = <380>; > + i3c-od-scl-lo-period-ns = <620>; > + sda-tx-hold-ns = <10>; > + > + mctp-controller; > + hub@0x70 { That's not a valid unit address. > + reg = <0x70 0x3c0 0x00700000>; > + cp0-ldo-en = "enabled"; > + cp1-ldo-en = "enabled"; > + cp0-ldo-volt = "1.2V"; > + cp1-ldo-volt = "1.2V"; > + tp0145-ldo-en = "enabled"; > + tp2367-ldo-en = "enabled"; > + tp0145-ldo-volt = "1.2V"; > + tp2367-ldo-volt = "1.2V"; > + tp0145-pullup = "2k"; > + tp2367-pullup = "2k"; Where are bindings for all this? Best regards, Krzysztof
Hi Delphine, kernel test robot noticed the following build errors: [auto build test ERROR on robh/for-next] [also build test ERROR on linus/master v6.9-rc7 next-20240507] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Delphine-CC-Chiu/ARM-dts-aspeed-yosemite4-add-I3C-config-in-DTS/20240506-193458 base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next patch link: https://lore.kernel.org/r/20240506113306.1283179-1-Delphine_CC_Chiu%40wiwynn.com patch subject: [PATCH v1] ARM: dts: aspeed: yosemite4: add I3C config in DTS config: arm-multi_v5_defconfig (https://download.01.org/0day-ci/archive/20240507/202405072003.qTcMKOm3-lkp@intel.com/config) compiler: arm-linux-gnueabi-gcc (GCC) 13.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240507/202405072003.qTcMKOm3-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202405072003.qTcMKOm3-lkp@intel.com/ All errors (new ones prefixed by >>): >> Error: arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:598.1-6 Label or path i3c0 not found >> Error: arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:641.1-6 Label or path i3c1 not found FATAL ERROR: Syntax error parsing input tree
> -----Original Message----- > From: Krzysztof Kozlowski <krzk@kernel.org> > Sent: Monday, May 6, 2024 11:38 PM > To: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@wiwynn.com>; > patrick@stwcx.xyz; joel@jms.id.au; openbmc@lists.ozlabs.org; Rob Herring > <robh@kernel.org>; Krzysztof Kozlowski <krzk+dt@kernel.org>; Conor Dooley > <conor+dt@kernel.org>; Andrew Jeffery <andrew@codeconstruct.com.au> > Cc: devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > linux-aspeed@lists.ozlabs.org; linux-kernel@vger.kernel.org > Subject: Re: [PATCH v1] ARM: dts: aspeed: yosemite4: add I3C config in DTS > > Security Reminder: Please be aware that this email is sent by an external > sender. > > On 06/05/2024 13:33, Delphine CC Chiu wrote: > > Set I3C config in yosemite4 DTS. > > > > Test plan: > > Tested with aspeed I3C patches and I3C hub driver. > > > > Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> > > --- > > .../aspeed/aspeed-bmc-facebook-yosemite4.dts | 86 > +++++++++++++++++++ > > 1 file changed, 86 insertions(+) > > > > diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > > index 64075cc41d92..6a30c424d745 100644 > > --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > > +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts > > @@ -595,6 +595,92 @@ i2c-mux@72 { > > }; > > }; > > > > +&i3c0 { > > + status = "okay"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_i3c1_default>; > > + i3c-pp-scl-hi-period-ns = <40>; > > + i3c-pp-scl-lo-period-ns = <40>; > > + i3c-od-scl-hi-period-ns = <380>; > > + i3c-od-scl-lo-period-ns = <620>; > > + sda-tx-hold-ns = <10>; > > + > > + mctp-controller; > > + hub@0x70 { > > That's not a valid unit address. > > Will update in the next patch. Thanks. > > + reg = <0x70 0x3c0 0x00700000>; > > + cp0-ldo-en = "enabled"; > > + cp1-ldo-en = "enabled"; > > + cp0-ldo-volt = "1.2V"; > > + cp1-ldo-volt = "1.2V"; > > + tp0145-ldo-en = "enabled"; > > + tp2367-ldo-en = "enabled"; > > + tp0145-ldo-volt = "1.2V"; > > + tp2367-ldo-volt = "1.2V"; > > + tp0145-pullup = "2k"; > > + tp2367-pullup = "2k"; > > Where are bindings for all this? > The bindings are from the following binding document. https://patchwork.kernel.org/project/linux-i3c/patch/20240217131412.4145506-1-steven.niu.uj@renesas.com/
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts index 64075cc41d92..6a30c424d745 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts @@ -595,6 +595,92 @@ i2c-mux@72 { }; }; +&i3c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i3c1_default>; + i3c-pp-scl-hi-period-ns = <40>; + i3c-pp-scl-lo-period-ns = <40>; + i3c-od-scl-hi-period-ns = <380>; + i3c-od-scl-lo-period-ns = <620>; + sda-tx-hold-ns = <10>; + + mctp-controller; + hub@0x70 { + reg = <0x70 0x3c0 0x00700000>; + cp0-ldo-en = "enabled"; + cp1-ldo-en = "enabled"; + cp0-ldo-volt = "1.2V"; + cp1-ldo-volt = "1.2V"; + tp0145-ldo-en = "enabled"; + tp2367-ldo-en = "enabled"; + tp0145-ldo-volt = "1.2V"; + tp2367-ldo-volt = "1.2V"; + tp0145-pullup = "2k"; + tp2367-pullup = "2k"; + + target-port@0 { + mode = "i3c"; + pullup = "enabled"; + }; + target-port@1 { + mode = "i3c"; + pullup = "enabled"; + }; + target-port@2 { + mode = "i3c"; + pullup = "enabled"; + }; + target-port@3 { + mode = "i3c"; + pullup = "enabled"; + }; + }; +}; + +&i3c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i3c2_default>; + i3c-pp-scl-hi-period-ns = <40>; + i3c-pp-scl-lo-period-ns = <40>; + i3c-od-scl-hi-period-ns = <380>; + i3c-od-scl-lo-period-ns = <620>; + sda-tx-hold-ns = <10>; + + mctp-controller; + hub@0x70 { + reg = <0x70 0x3c0 0x00700000>; + cp0-ldo-en = "enabled"; + cp1-ldo-en = "enabled"; + cp0-ldo-volt = "1.2V"; + cp1-ldo-volt = "1.2V"; + tp0145-ldo-en = "enabled"; + tp2367-ldo-en = "enabled"; + tp0145-ldo-volt = "1.2V"; + tp2367-ldo-volt = "1.2V"; + tp0145-pullup = "2k"; + tp2367-pullup = "2k"; + + target-port@0 { + mode = "i3c"; + pullup = "enabled"; + }; + target-port@1 { + mode = "i3c"; + pullup = "enabled"; + }; + target-port@2 { + mode = "i3c"; + pullup = "enabled"; + }; + target-port@3 { + mode = "i3c"; + pullup = "enabled"; + }; + }; +}; + &adc0 { ref_voltage = <2500>; status = "okay";
Set I3C config in yosemite4 DTS. Test plan: Tested with aspeed I3C patches and I3C hub driver. Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> --- .../aspeed/aspeed-bmc-facebook-yosemite4.dts | 86 +++++++++++++++++++ 1 file changed, 86 insertions(+)