@@ -5,6 +5,8 @@
*/
/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
#include "rk3308.dtsi"
/ {
@@ -24,17 +26,21 @@ chosen {
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&green_led_gio>, <&heartbeat_led_gpio>;
+ pinctrl-0 = <&green_led>, <&heartbeat_led>;
green-led {
+ color = <LED_COLOR_ID_GREEN>;
default-state = "on";
+ function = LED_FUNCTION_POWER;
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
label = "rockpis:green:power";
linux,default-trigger = "default-on";
};
blue-led {
+ color = <LED_COLOR_ID_BLUE>;
default-state = "on";
+ function = LED_FUNCTION_HEARTBEAT;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
label = "rockpis:blue:user";
linux,default-trigger = "heartbeat";
@@ -216,11 +222,11 @@ &pinctrl {
pinctrl-0 = <&rtc_32k>;
leds {
- green_led_gio: green-led-gpio {
+ green_led: green-led {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
- heartbeat_led_gpio: heartbeat-led-gpio {
+ heartbeat_led: heartbeat-led {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
The nodename, <name>-gpio, of referenced pinctrl nodes for the two LEDs on the ROCK Pi S cause DT schema validation error: leds: green-led-gpio: {'rockchip,pins': [[0, 6, 0, 90]], 'phandle': [[98]]} is not of type 'array' from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml# leds: heartbeat-led-gpio: {'rockchip,pins': [[0, 5, 0, 90]], 'phandle': [[99]]} is not of type 'array' from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml# Rename the pinctrl nodes and symbols to pass DT schema validation, also extend LED nodes with information about color and function. Fixes: 2e04c25b1320 ("arm64: dts: rockchip: add ROCK Pi S DTS support") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)