| Message ID | 20240525-midas-wm1811-gpio-jack-v4-2-f488e03bd8c7@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ASoC: samsung: midas-audio: Add GPIO-based headset jack detection | expand |
On 25/05/2024 15:28, Artur Weber wrote: > Some Samsung devices that share the midas-audio driver use a GPIO-based > approach to headset jack detection, as opposed to using the built-in > jack detection provided by the wm8994 driver. This setup uses two GPIOs > (one for jack detection and another for key detection) and an ADC > channel for determining the jack type or button pressed. > > Add DT configuration values that allow for describing these setups. > > Signed-off-by: Artur Weber <aweber.kernel@gmail.com> > --- Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml index 6ed53dd0bb53..69ddfd4afdcd 100644 --- a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml @@ -64,6 +64,36 @@ properties: maxItems: 1 description: GPIO pin for line out selection + headset-detect-gpios: + maxItems: 1 + description: GPIO for detection of headset insertion + + headset-key-gpios: + maxItems: 1 + description: GPIO for detection of headset key press + + io-channels: + maxItems: 1 + description: IO channel to read micbias voltage for headset detection + + io-channel-names: + const: headset-detect + + samsung,headset-4pole-threshold-microvolt: + minItems: 2 + maxItems: 2 + description: + Array containing minimum and maximum IO channel value for 4-pole + (with microphone/button) headsets. If the IO channel value is + outside of this range, a 3-pole headset is assumed. + + samsung,headset-button-threshold-microvolt: + minItems: 3 + maxItems: 3 + description: | + Array of minimum (inclusive) IO channel values for headset button + detection, in order: "Media", "Volume Up" and "Volume Down". + required: - compatible - cpu
Some Samsung devices that share the midas-audio driver use a GPIO-based approach to headset jack detection, as opposed to using the built-in jack detection provided by the wm8994 driver. This setup uses two GPIOs (one for jack detection and another for key detection) and an ADC channel for determining the jack type or button pressed. Add DT configuration values that allow for describing these setups. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> --- Changes in v3: - Re-added pipe (|) to description of samsung,headset-button-threshold- microvolt to prevent syntax error (otherwise the "in order: ..." part is interpreted as a list) Changes in v2: - Added vendor prefix to threshold properties - Dropped pipe (|) character from description: field --- .../bindings/sound/samsung,midas-audio.yaml | 30 ++++++++++++++++++++++ 1 file changed, 30 insertions(+)