@@ -22,7 +22,7 @@
/ {
/* Introduce a fixed regulator for the new ethernet controller */
- veth: fixedregulator@0 {
+ veth: regulator-veth {
compatible = "regulator-fixed";
regulator-name = "veth";
regulator-min-microvolt = <3300000>;
@@ -45,7 +45,7 @@ memory@0 {
};
/* The voltage to the MMC card is hardwired at 3.3V */
- vmmc: fixedregulator@0 {
+ vmmc: regulator-vmmc {
compatible = "regulator-fixed";
regulator-name = "vmmc";
regulator-min-microvolt = <3300000>;
@@ -59,7 +59,7 @@ xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
clock-frequency = <24000000>;
};
- timclk: timclk@1M {
+ timclk: clock-1000000 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
@@ -68,7 +68,7 @@ timclk: timclk@1M {
};
/* FIXME: this actually hangs off the PLL clocks */
- pclk: pclk@0 {
+ pclk: clock-pclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
@@ -69,7 +69,7 @@ xtal24mhz: mclk: kmiclk: sspclk: uartclk: clock-24000000 {
clock-frequency = <24000000>;
};
- timclk: timclk@1M {
+ timclk: clock-1000000 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
@@ -78,7 +78,7 @@ timclk: timclk@1M {
};
/* FIXME: this actually hangs off the PLL clocks */
- pclk: pclk@0 {
+ pclk: clock-pclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
@@ -169,13 +169,13 @@ xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
clock-frequency = <24000000>;
};
- refclk32khz: refclk32khz {
+ refclk32khz: clock-32768 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
- timclk: timclk@1M {
+ timclk: clock-1000000 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
@@ -184,7 +184,7 @@ timclk: timclk@1M {
};
/* FIXME: this actually hangs off the PLL clocks */
- pclk: pclk@0 {
+ pclk: clock-pclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
@@ -68,13 +68,13 @@ xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
clock-frequency = <24000000>;
};
- refclk32khz: refclk32khz {
+ refclk32khz: clock-32768 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
};
- timclk: timclk@1M {
+ timclk: clock-1000000 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
@@ -83,7 +83,7 @@ timclk: timclk@1M {
};
/* FIXME: this actually hangs off the PLL clocks */
- pclk: pclk@0 {
+ pclk: clock-pclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
@@ -54,7 +54,7 @@ vco2: clock-controller@4 {
};
/* Also used for the Smart Card Interface SCI */
- impd1_uartclk: clock@1_4 {
+ impd1_uartclk: clock-uart {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <4>;
@@ -64,7 +64,7 @@ impd1_uartclk: clock@1_4 {
};
/* For the SSP the clock is divided by 64 */
- impd1_sspclk: clock@1_64 {
+ impd1_sspclk: clock-ssp {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <64>;
@@ -64,7 +64,7 @@ xtal24mhz: pclk: clock-24000000 {
};
/* The UART clock is 14.74 MHz divided by an ICS525 */
- uartclk: uartclk@14.74M {
+ uartclk: clock-14745600 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <14745600>;
@@ -73,7 +73,7 @@ uartclk: uartclk@14.74M {
core-module@10000000 {
/* 24 MHz chrystal on the core module */
- cm24mhz: cm24mhz@24M {
+ cm24mhz: clock-24000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -47,14 +47,14 @@ cpu@0 {
*/
/* The codec chrystal operates at 24.576 MHz */
- xtal_codec: xtal24.576@24.576M {
+ xtal_codec: clock-24576000 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24576000>;
};
/* The chrystal is divided by 2 by the codec for the AACI bit clock */
- aaci_bitclk: aaci_bitclk@12.288M {
+ aaci_bitclk: clock-12288000 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <2>;
@@ -63,21 +63,21 @@ aaci_bitclk: aaci_bitclk@12.288M {
};
/* This is a 25MHz chrystal on the base board */
- xtal25mhz: xtal25mhz@25M {
+ xtal25mhz: clock-25000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
};
/* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
- uartclk: uartclk@14.74M {
+ uartclk: clock-14745600 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <14745600>;
};
/* Actually sysclk I think */
- pclk: pclk@0 {
+ pclk: clock-pclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
@@ -85,7 +85,7 @@ pclk: pclk@0 {
core-module@10000000 {
/* 24 MHz chrystal on the core module */
- cm24mhz: cm24mhz@24M {
+ cm24mhz: clock-24000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -131,7 +131,7 @@ kmiclk: kmiclk@1M {
};
/* The timer clock is the 24 MHz oscillator divided to 1MHz */
- timclk: timclk@1M {
+ timclk: clock-1000000 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
@@ -48,31 +48,31 @@ / {
#address-cells = <1>;
#size-cells = <1>;
- oscclk0: clk-osc0 {
+ oscclk0: clock-50000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
};
- oscclk1: clk-osc1 {
+ oscclk1: clock-24576000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
- oscclk2: clk-osc2 {
+ oscclk2: clock-25000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
- cfgclk: clk-cfg {
+ cfgclk: clock-5000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <5000000>;
};
- spicfgclk: clk-spicfg {
+ spicfgclk: clock-75000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <75000000>;
@@ -86,7 +86,7 @@ sysclk: spiclcd: spicon: i2cclcd: i2caud: clock-sys {
clock-mult = <1>;
};
- audmclk: clk-audm {
+ audmclk: clk-12388000 {
compatible = "fixed-factor-clock";
clocks = <&oscclk1>;
#clock-cells = <0>;
@@ -94,7 +94,7 @@ audmclk: clk-audm {
clock-mult = <1>;
};
- audsclk: clk-auds {
+ audsclk: clk-3072000 {
compatible = "fixed-factor-clock";
clocks = <&oscclk1>;
#clock-cells = <0>;
@@ -24,7 +24,7 @@ memory@0 {
reg = <0x0 0x08000000>;
};
- xtal24mhz: xtal24mhz@24M {
+ xtal24mhz: clock-24000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -142,14 +142,14 @@ led@8,7 {
};
/* OSC1 on AB, OSC4 on PB */
- osc1: cm_aux_osc@24M {
+ osc1: clock-osc {
#clock-cells = <0>;
compatible = "arm,versatile-cm-auxosc";
clocks = <&xtal24mhz>;
};
/* The timer clock is the 24 MHz oscillator divided to 1MHz */
- timclk: timclk@1M {
+ timclk: clock-1000000 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
@@ -157,7 +157,7 @@ timclk: timclk@1M {
clocks = <&xtal24mhz>;
};
- pclk: pclk@24M {
+ pclk: clock-24000000 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -20,7 +20,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
- v2m_fixed_3v3: fixed-regulator-0 {
+ v2m_fixed_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
@@ -28,21 +28,21 @@ v2m_fixed_3v3: fixed-regulator-0 {
regulator-always-on;
};
- v2m_clk24mhz: clk24mhz {
+ v2m_clk24mhz: clock-24000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "v2m:clk24mhz";
};
- v2m_refclk1mhz: refclk1mhz {
+ v2m_refclk1mhz: clock-1000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <1000000>;
clock-output-names = "v2m:refclk1mhz";
};
- v2m_refclk32khz: refclk32khz {
+ v2m_refclk32khz: clock-32768 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
@@ -351,7 +351,7 @@ clcd_pads_mb: endpoint {
};
};
- v2m_fixed_3v3: fixed-regulator-0 {
+ v2m_fixed_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
@@ -359,21 +359,21 @@ v2m_fixed_3v3: fixed-regulator-0 {
regulator-always-on;
};
- v2m_clk24mhz: clk24mhz {
+ v2m_clk24mhz: clock-24000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "v2m:clk24mhz";
};
- v2m_refclk1mhz: refclk1mhz {
+ v2m_refclk1mhz: clock-1000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <1000000>;
clock-output-names = "v2m:refclk1mhz";
};
- v2m_refclk32khz: refclk32khz {
+ v2m_refclk32khz: clock-32768 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
@@ -436,7 +436,7 @@ mcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
- oscclk0 {
+ clock-controller-0 {
/* MCC static memory clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
@@ -445,7 +445,7 @@ oscclk0 {
clock-output-names = "v2m:oscclk0";
};
- v2m_oscclk1: oscclk1 {
+ v2m_oscclk1: clock-controller-1 {
/* CLCD clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
@@ -454,7 +454,7 @@ v2m_oscclk1: oscclk1 {
clock-output-names = "v2m:oscclk1";
};
- v2m_oscclk2: oscclk2 {
+ v2m_oscclk2: clock-controller-2 {
/* IO FPGA peripheral clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
@@ -463,7 +463,7 @@ v2m_oscclk2: oscclk2 {
clock-output-names = "v2m:oscclk2";
};
- volt-vio {
+ regulator-vio {
/* Logic level voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
@@ -142,7 +142,7 @@ dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
- oscclk0 {
+ clock-controller-0 {
/* CPU PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
@@ -151,7 +151,7 @@ oscclk0 {
clock-output-names = "oscclk0";
};
- oscclk4 {
+ clock-controller-4 {
/* Multiplexed AXI master clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 4>;
@@ -160,7 +160,7 @@ oscclk4 {
clock-output-names = "oscclk4";
};
- hdlcd_clk: oscclk5 {
+ hdlcd_clk: clock-controller-5 {
/* HDLCD PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 5>;
@@ -169,7 +169,7 @@ hdlcd_clk: oscclk5 {
clock-output-names = "oscclk5";
};
- smbclk: oscclk6 {
+ smbclk: clock-controller-6 {
/* SMB clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 6>;
@@ -178,7 +178,7 @@ smbclk: oscclk6 {
clock-output-names = "oscclk6";
};
- sys_pll: oscclk7 {
+ sys_pll: clock-controller-7 {
/* SYS PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 7>;
@@ -187,7 +187,7 @@ sys_pll: oscclk7 {
clock-output-names = "oscclk7";
};
- oscclk8 {
+ clock-controller-8 {
/* DDR2 PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 8>;
@@ -196,7 +196,7 @@ oscclk8 {
clock-output-names = "oscclk8";
};
- volt-cores {
+ regulator-cores {
/* CPU core voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
@@ -253,7 +253,7 @@ dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
- oscclk0 {
+ clock-controller-0 {
/* A15 PLL 0 reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
@@ -262,7 +262,7 @@ oscclk0 {
clock-output-names = "oscclk0";
};
- oscclk1 {
+ clock-controller-1 {
/* A15 PLL 1 reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
@@ -271,7 +271,7 @@ oscclk1 {
clock-output-names = "oscclk1";
};
- oscclk2 {
+ clock-controller-2 {
/* A7 PLL 0 reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
@@ -280,7 +280,7 @@ oscclk2 {
clock-output-names = "oscclk2";
};
- oscclk3 {
+ clock-controller-3 {
/* A7 PLL 1 reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 3>;
@@ -289,7 +289,7 @@ oscclk3 {
clock-output-names = "oscclk3";
};
- oscclk4 {
+ clock-controller-4 {
/* External AXI master clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 4>;
@@ -298,7 +298,7 @@ oscclk4 {
clock-output-names = "oscclk4";
};
- hdlcd_clk: oscclk5 {
+ hdlcd_clk: clock-controller-5 {
/* HDLCD PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 5>;
@@ -307,7 +307,7 @@ hdlcd_clk: oscclk5 {
clock-output-names = "oscclk5";
};
- smbclk: oscclk6 {
+ smbclk: clock-controller-6 {
/* Static memory controller clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 6>;
@@ -316,7 +316,7 @@ smbclk: oscclk6 {
clock-output-names = "oscclk6";
};
- oscclk7 {
+ clock-controller-7 {
/* SYS PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 7>;
@@ -325,7 +325,7 @@ oscclk7 {
clock-output-names = "oscclk7";
};
- oscclk8 {
+ clock-controller-8 {
/* DDR2 PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 8>;
@@ -334,7 +334,7 @@ oscclk8 {
clock-output-names = "oscclk8";
};
- volt-a15 {
+ regulator-a15 {
/* A15 CPU core voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
@@ -345,7 +345,7 @@ volt-a15 {
label = "A15 Vcore";
};
- volt-a7 {
+ regulator-a7 {
/* A7 CPU core voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 1>;
@@ -145,7 +145,7 @@ dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
- cpu_clk: oscclk0 {
+ cpu_clk: clock-controller-0 {
/* CPU and internal AXI reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
@@ -154,7 +154,7 @@ cpu_clk: oscclk0 {
clock-output-names = "oscclk0";
};
- axi_clk: oscclk1 {
+ axi_clk: clock-controller-1 {
/* Multiplexed AXI master clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
@@ -163,7 +163,7 @@ axi_clk: oscclk1 {
clock-output-names = "oscclk1";
};
- oscclk2 {
+ clock-controller-2 {
/* DDR2 */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
@@ -172,7 +172,7 @@ oscclk2 {
clock-output-names = "oscclk2";
};
- hdlcd_clk: oscclk3 {
+ hdlcd_clk: clock-controller-3 {
/* HDLCD */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 3>;
@@ -181,7 +181,7 @@ hdlcd_clk: oscclk3 {
clock-output-names = "oscclk3";
};
- oscclk4 {
+ clock-controller-4 {
/* Test chip gate configuration */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 4>;
@@ -190,7 +190,7 @@ oscclk4 {
clock-output-names = "oscclk4";
};
- smbclk: oscclk5 {
+ smbclk: clock-controller-5 {
/* SMB clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 5>;
@@ -187,7 +187,7 @@ dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
- oscclk0: extsaxiclk {
+ oscclk0: clock-controller-0 {
/* ACLK clock to the AXI master port on the test chip */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
@@ -196,7 +196,7 @@ oscclk0: extsaxiclk {
clock-output-names = "extsaxiclk";
};
- oscclk1: clcdclk {
+ oscclk1: clock-controller-1 {
/* Reference clock for the CLCD */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
@@ -205,7 +205,7 @@ oscclk1: clcdclk {
clock-output-names = "clcdclk";
};
- smbclk: oscclk2: tcrefclk {
+ smbclk: oscclk2: clock-controller-2 {
/* Reference clock for the test chip internal PLLs */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
@@ -214,7 +214,7 @@ smbclk: oscclk2: tcrefclk {
clock-output-names = "tcrefclk";
};
- volt-vd10 {
+ regulator-vd10 {
/* Test Chip internal logic voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
@@ -223,7 +223,7 @@ volt-vd10 {
label = "VD10";
};
- volt-vd10-s2 {
+ regulator-vd10-s2 {
/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 1>;
@@ -232,7 +232,7 @@ volt-vd10-s2 {
label = "VD10_S2";
};
- volt-vd10-s3 {
+ regulator-vd10-s3 {
/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 2>;
@@ -241,7 +241,7 @@ volt-vd10-s3 {
label = "VD10_S3";
};
- volt-vcc1v8 {
+ regulator-vcc1v8 {
/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 3>;
@@ -250,7 +250,7 @@ volt-vcc1v8 {
label = "VCC1V8";
};
- volt-ddr2vtt {
+ regulator-ddr2vtt {
/* DDR2 SDRAM VTT termination voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 4>;
@@ -259,7 +259,7 @@ volt-ddr2vtt {
label = "DDR2VTT";
};
- volt-vcc3v3 {
+ regulator-vcc3v3 {
/* Local board supply for miscellaneous logic external to the Test Chip */
arm,vexpress-sysreg,func = <2 5>;
compatible = "arm,vexpress-volt";
@@ -21,7 +21,7 @@ smsc: ethernet@4010000 {
reg-io-width = <2>;
};
- vmmc_v3_3d: fixed_v3_3d {
+ vmmc_v3_3d: regulator-vmmc {
compatible = "regulator-fixed";
regulator-name = "vmmc_supply";
regulator-min-microvolt = <3300000>;
@@ -60,14 +60,14 @@ L2_0: l2-cache0 {
cache-sets = <1024>;
};
- refclk100mhz: refclk100mhz {
+ refclk100mhz: clock-100000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
clock-output-names = "apb_pclk";
};
- smbclk: refclk24mhzx2 {
+ smbclk: clock-48000000 {
/* Reference 24MHz clock x 2 */
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -83,7 +83,7 @@ timer {
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
};
- uartclk: uartclk {
+ uartclk: clock-50000000 {
/* UART clock - 50MHz */
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -99,21 +99,21 @@ watchdog@2a440000 {
timeout-sec = <30>;
};
- v2m_clk24mhz: clk24mhz {
+ v2m_clk24mhz: clock-24000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "v2m:clk24mhz";
};
- v2m_refclk1mhz: refclk1mhz {
+ v2m_refclk1mhz: clock-1000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <1000000>;
clock-output-names = "v2m:refclk1mhz";
};
- v2m_refclk32khz: refclk32khz {
+ v2m_refclk32khz: clock-32768 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
@@ -8,35 +8,35 @@
*/
/ {
/* SoC fixed clocks */
- soc_uartclk: refclk7372800hz {
+ soc_uartclk: clock-7372800 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <7372800>;
clock-output-names = "juno:uartclk";
};
- soc_usb48mhz: clk48mhz {
+ soc_usb48mhz: clock-48000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <48000000>;
clock-output-names = "clk48mhz";
};
- soc_smc50mhz: clk50mhz {
+ soc_smc50mhz: clock-50000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
clock-output-names = "smc_clk";
};
- soc_refclk100mhz: refclk100mhz {
+ soc_refclk100mhz: clock-100000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
clock-output-names = "apb_pclk";
};
- soc_faxiclk: refclk400mhz {
+ soc_faxiclk: clock-400000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <400000000>;
@@ -8,35 +8,35 @@
*/
/ {
- mb_clk24mhz: clk24mhz {
+ mb_clk24mhz: clock-24000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "juno_mb:clk24mhz";
};
- mb_clk25mhz: clk25mhz {
+ mb_clk25mhz: clock-25000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
clock-output-names = "juno_mb:clk25mhz";
};
- v2m_refclk1mhz: refclk1mhz {
+ v2m_refclk1mhz: clock-1000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <1000000>;
clock-output-names = "juno_mb:refclk1mhz";
};
- v2m_refclk32khz: refclk32khz {
+ v2m_refclk32khz: clock-32768 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "juno_mb:refclk32khz";
};
- mb_fixed_3v3: mcc-sb-3v3 {
+ mb_fixed_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "MCC_SB_3V3";
regulator-min-microvolt = <3300000>;
@@ -8,28 +8,28 @@
* VEMotherBoard.lisa
*/
/ {
- v2m_clk24mhz: clk24mhz {
+ v2m_clk24mhz: clock-24000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "v2m:clk24mhz";
};
- v2m_refclk1mhz: refclk1mhz {
+ v2m_refclk1mhz: clock-1000000 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <1000000>;
clock-output-names = "v2m:refclk1mhz";
};
- v2m_refclk32khz: refclk32khz {
+ v2m_refclk32khz: clock-32768 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "v2m:refclk32khz";
};
- v2m_fixed_3v3: v2m-3v3 {
+ v2m_fixed_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
@@ -41,7 +41,7 @@ mcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
- v2m_oscclk1: oscclk1 {
+ v2m_oscclk1: clock-controller {
/* CLCD clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
@@ -111,7 +111,7 @@ dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
- smbclk: smclk {
+ smbclk: clock-controller {
/* SMC clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 4>;
@@ -120,7 +120,7 @@ smbclk: smclk {
clock-output-names = "smclk";
};
- volt-vio {
+ regulator-vio {
/* VIO to expansion board above */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
@@ -130,7 +130,7 @@ volt-vio {
regulator-always-on;
};
- volt-12v {
+ regulator-12v {
/* 12V from power connector J6 */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 1>;
With the recent defining of preferred naming for fixed clock and regulator nodes, convert the Arm Ltd. boards to use the preferred names. In the cases which had a unit-address, warnings about missing "reg" property are fixed. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> --- .../boot/dts/arm/arm-realview-eb-bbrevd.dtsi | 2 +- arch/arm/boot/dts/arm/arm-realview-eb.dtsi | 6 ++--- arch/arm/boot/dts/arm/arm-realview-pb1176.dts | 4 ++-- arch/arm/boot/dts/arm/arm-realview-pb11mp.dts | 6 ++--- arch/arm/boot/dts/arm/arm-realview-pbx.dtsi | 6 ++--- arch/arm/boot/dts/arm/integratorap-im-pd1.dts | 4 ++-- arch/arm/boot/dts/arm/integratorap.dts | 4 ++-- arch/arm/boot/dts/arm/integratorcp.dts | 14 ++++++------ arch/arm/boot/dts/arm/mps2.dtsi | 14 ++++++------ arch/arm/boot/dts/arm/versatile-ab.dts | 8 +++---- arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi | 8 +++---- arch/arm/boot/dts/arm/vexpress-v2m.dtsi | 16 +++++++------- .../boot/dts/arm/vexpress-v2p-ca15-tc1.dts | 14 ++++++------ .../arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts | 22 +++++++++---------- arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts | 12 +++++----- arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts | 18 +++++++-------- arch/arm64/boot/dts/arm/corstone1000-fvp.dts | 2 +- arch/arm64/boot/dts/arm/corstone1000.dtsi | 6 ++--- arch/arm64/boot/dts/arm/foundation-v8.dtsi | 6 ++--- arch/arm64/boot/dts/arm/juno-clocks.dtsi | 10 ++++----- arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 10 ++++----- .../boot/dts/arm/rtsm_ve-motherboard.dtsi | 10 ++++----- .../boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts | 6 ++--- 23 files changed, 104 insertions(+), 104 deletions(-)