| Message ID | 20240530231608.3557782-1-chris.packham@alliedtelesis.co.nz (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: marvell: Add 7-segment LED display on x530 | expand |
Chris Packham <chris.packham@alliedtelesis.co.nz> writes: > The Allied Telesis x530 products have a 7-segment LED display which is > used for node identification when the devices are stacked. Represent > this as a gpio-7-segment device. > > Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Applied on mvebu/dt Thanks, Gregory > --- > This was originally sent as part of the series that added the seg-led-gpio > driver but wasn't applied with those changes. At the time I said I'd submit > this separately but I forgot about it until now. > > arch/arm/boot/dts/marvell/armada-385-atl-x530.dts | 13 ++++++++++++- > 1 file changed, 12 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts b/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts > index 5a9ab8410b7b..2fb7304039be 100644 > --- a/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts > +++ b/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts > @@ -43,6 +43,17 @@ uart0: serial@12000 { > }; > }; > }; > + > + led-7seg { > + compatible = "gpio-7-segment"; > + segment-gpios = <&led_7seg_gpio 0 GPIO_ACTIVE_LOW>, > + <&led_7seg_gpio 1 GPIO_ACTIVE_LOW>, > + <&led_7seg_gpio 2 GPIO_ACTIVE_LOW>, > + <&led_7seg_gpio 3 GPIO_ACTIVE_LOW>, > + <&led_7seg_gpio 4 GPIO_ACTIVE_LOW>, > + <&led_7seg_gpio 5 GPIO_ACTIVE_LOW>, > + <&led_7seg_gpio 6 GPIO_ACTIVE_LOW>; > + }; > }; > > &pciec { > @@ -149,7 +160,7 @@ i2c@3 { > #size-cells = <0>; > reg = <3>; > > - gpio@20 { > + led_7seg_gpio: gpio@20 { > compatible = "nxp,pca9554"; > gpio-controller; > #gpio-cells = <2>; > -- > 2.45.1
diff --git a/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts b/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts index 5a9ab8410b7b..2fb7304039be 100644 --- a/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts +++ b/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts @@ -43,6 +43,17 @@ uart0: serial@12000 { }; }; }; + + led-7seg { + compatible = "gpio-7-segment"; + segment-gpios = <&led_7seg_gpio 0 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 1 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 2 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 3 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 4 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 5 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 6 GPIO_ACTIVE_LOW>; + }; }; &pciec { @@ -149,7 +160,7 @@ i2c@3 { #size-cells = <0>; reg = <3>; - gpio@20 { + led_7seg_gpio: gpio@20 { compatible = "nxp,pca9554"; gpio-controller; #gpio-cells = <2>;
The Allied Telesis x530 products have a 7-segment LED display which is used for node identification when the devices are stacked. Represent this as a gpio-7-segment device. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> --- This was originally sent as part of the series that added the seg-led-gpio driver but wasn't applied with those changes. At the time I said I'd submit this separately but I forgot about it until now. arch/arm/boot/dts/marvell/armada-385-atl-x530.dts | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)