From patchwork Sun Jun 2 15:49:40 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Josua Mayer X-Patchwork-Id: 13682954 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 8604FC25B7E for ; Sun, 2 Jun 2024 15:50:27 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:Cc:To:In-Reply-To: References:Message-Id:Subject:Date:From:Reply-To:Content-ID: Content-Description:Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc :Resent-Message-ID:List-Owner; bh=BJjzKJ6SeyuYYo63tKNX2ieVCrQH4hNPDzsr/M0B1j0=; b=ki8HDGazleG9zq9f4sTurWLNt2 aQvUd0fKOc1AJ5c5Ujw3pVHN357DTtJDeCj/dLzZ5PA/Eh+UcH1x/wfFX0Z6MnQyuPBjjtpqcp3/i BzJHd9zi9Mg2rq/NDkWDh+YAUg45XAQP3S9YfGHJcUSJxk6eSQf0LD2EogQVRHf8jFpzbXo7gIzpk gjeNu2hFHyAIavEWuavoA/ZAzvQ5c5a7rLHovYuuS62qMUKHcSTIQi/GHwWyiALml3c9bg0vyNszt CuNKNpZN3dv1WdF7Z7XP9KFiKI9939GWnXIyzhAquYpshfLPEH7nFer5+ICdmg8pV4v1e0+CZ5vMr 5Jgpqzhg==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.97.1 #2 (Red Hat Linux)) id 1sDnTJ-0000000EWd4-4BC2; Sun, 02 Jun 2024 15:50:14 +0000 Received: from mail-he1eur04on2072f.outbound.protection.outlook.com ([2a01:111:f403:260f::72f] helo=EUR04-HE1-obe.outbound.protection.outlook.com) by bombadil.infradead.org with esmtps (Exim 4.97.1 #2 (Red Hat Linux)) id 1sDnT7-0000000EWPI-0KVy; Sun, 02 Jun 2024 15:50:04 +0000 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=f/ZS3F0DDRWeiLnxrbSDqdqveIvLGpqPIBZg2gc6g/3hmrP3v6SDAsJFF7YYFy/+fgTLMS+llNAJl6oI2vR9H3nihlraFAttK6BnjmqVd9+Xdk0OF7OkR5mvzreXPrbpcPd/3U08ezXeJrOHW6AdqQ0TkMDa1OvhGV12zrv3b+37+EHulVfQMo409yCB3xz0XVIcFsZd7bZkBBDnwl3LFmgQXrLnzckCUkEK1fI+j5FDw3HoabgQwgESw2N/x1ubAafIv2gqhOx9zINQyH4eHrTKH9ptKOwdv8LoIqapzF6RRbfok2m7AvgHshgSgtyfF6UAXFHKHf8mrNmtH5DZqQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=4d05q49xYLdldzIAJAOLYnFweox24PXDvvTxGws5LHM=; b=OjeDa7Ew3RWZFJJBfr9ekjoKZ6ND9obuYPQllAsM3biul9g8CIjn9BY/SRWOYB4yDFgVjam9iQ5IVjMPd9gmGB2Yf1ENVj2nZCJd4IRujHuppXNrzFFnqIxscbqHZMONOBk/ZdJ+0uoVlhhGduaDgMms+6HHlRjx8RRNCYBJMV6QXZVXWVdPOaEYmGw5nZ7xcNXLkejCnE1Cq+UkaebnrxxXAQ+FOUfBFq0j/BtqdDn95HVmy8AbRB/cv6is0XeNX4i4QgWxpEkh+2OIPjgm7RoPE7I1IfixcrjD7p6rgVbhfxkxm1XG/OD/bMOEeC7vgi2m8v+Sr+TnptrWpHFBmw== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=solid-run.com; dmarc=pass action=none header.from=solid-run.com; dkim=pass header.d=solid-run.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=solidrn.onmicrosoft.com; s=selector1-solidrn-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=4d05q49xYLdldzIAJAOLYnFweox24PXDvvTxGws5LHM=; b=FUSW74W9Yr4gu8n9CytmkC/hXLR35JEd3v6WgInncYhxoifr9wXSp/cYCrirRBa25r/cCvMMX8b+SKKJ/s3J7VcuyZVMEdtNwknKYXxmOyXuRsFePmxuSy7p+vPlQwjQxotNPnsVuujrlx3DX4f8k+ae9KNXXONXDV8SXbVJjIw= Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=solid-run.com; Received: from AM9PR04MB7586.eurprd04.prod.outlook.com (2603:10a6:20b:2d5::17) by AS8PR04MB7512.eurprd04.prod.outlook.com (2603:10a6:20b:29e::10) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.7611.27; Sun, 2 Jun 2024 15:49:43 +0000 Received: from AM9PR04MB7586.eurprd04.prod.outlook.com ([fe80::c04e:8a97:516c:5529]) by AM9PR04MB7586.eurprd04.prod.outlook.com ([fe80::c04e:8a97:516c:5529%7]) with mapi id 15.20.7633.021; Sun, 2 Jun 2024 15:49:43 +0000 From: Josua Mayer Date: Sun, 02 Jun 2024 17:49:40 +0200 Subject: [PATCH v6 5/7] arm64: dts: add description for solidrun cn9130 som and clearfog boards Message-Id: <20240602-cn9130-som-v6-5-89393e86d4c7@solid-run.com> References: <20240602-cn9130-som-v6-0-89393e86d4c7@solid-run.com> In-Reply-To: <20240602-cn9130-som-v6-0-89393e86d4c7@solid-run.com> To: Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Rob Herring , Krzysztof Kozlowski , Jonathan Cameron , Lars-Peter Clausen , Daniel Baluta , Vinod Koul , Kishon Vijay Abraham I , Konstantin Porotchkin , Richard Cochran Cc: Yazan Shhady , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org, linux-phy@lists.infradead.org, netdev@vger.kernel.org, Josua Mayer X-Mailer: b4 0.12.4 X-ClientProxiedBy: FR5P281CA0045.DEUP281.PROD.OUTLOOK.COM (2603:10a6:d10:f3::12) To AM9PR04MB7586.eurprd04.prod.outlook.com (2603:10a6:20b:2d5::17) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: AM9PR04MB7586:EE_|AS8PR04MB7512:EE_ X-MS-Office365-Filtering-Correlation-Id: afcd37e9-adde-4ee4-c973-08dc831b9ea9 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0;ARA:13230031|52116005|376005|1800799015|7416005|366007|921011|38350700005; X-Microsoft-Antispam-Message-Info: =?utf-8?q?/BIMBwp5tJbjCk8tR4tDKV0XZq00t7n?= =?utf-8?q?yhLVfb8RBgh3VXBTMl/PCDUo+tDB5vVPmNDh7uQOzdagM74d08IJwjprBE1uCI0gV?= =?utf-8?q?uFkMcrOPvQfCcS53N1iKj/PfHtjCRnrF48anPyBKzSw43+ZbMskYqiv8ovfD1pdtl?= =?utf-8?q?ZVfGOPBm1ahFxr8+iv+2Amai92P3BTa1hqTOZOTocYgGuO6N0RCgYFPNt4oDYR4Ih?= =?utf-8?q?aSvp1JXNUk9+O4vSwByl1mJqT0IAXInqwcQ3aQT0DaoYPJTmTsi1UGCEa4f0RNK35?= =?utf-8?q?w4OLeNQGWvoeECjw+7sLzHbBYoIeM9I5aAN2lVBSy7H5ouVal7S9E/KjyNBrhJ8pz?= =?utf-8?q?ZZyThdJs+sRNhdqK+iwL/qL2wxE1rM7SFKrNU8+GO22DirQi1u9qgp/RWeQrbbFhW?= =?utf-8?q?O6I5wVNHxtLkjRinVAjmy0CiY3LIfJD4Q+xuQb+Wpj9kPxMXGzihLaVumM1HHwbhj?= =?utf-8?q?MpI7Z4jfVNqZBX+6LOY30MEjqivP9sqnOjAC/nL7KV9QuF8PEIV48q/5Xf1nBdjTM?= =?utf-8?q?ikvpfajj1UGokcLO9J5+hC2aWXj2hct/JQ3lwLoDKw0oGDmiy+OF4aPkELaW0PRmX?= =?utf-8?q?KwpWsxA/OQLS4WEHiCUgYUjP4BQV9D6rZ9ku9iER5t6/wVVgRV0Y6yQOIJgooy6+b?= =?utf-8?q?U1XMTiRM6B74M7ZOOuOmaoNLKl9zTJ08Goq5NhLNGi07ODzGIv2ndHPFxrLWdgjWB?= =?utf-8?q?rWjp6acCpZBoBOzSAjYZRBukLaAC2DPnTI/XyYTzg6ra61uyJ8meUbwYe4bKPQAU5?= =?utf-8?q?ffX1pYbh8w1jLgmWM281a/AZSgKADCtVMtqBycQwdoMDNm0oUcjiUoKVcFLygoOpW?= =?utf-8?q?mVbaoPy99D2PCuwt5GggvkoJIkeUaOrNCvZiZMdXTDFwWdGgUoyXu7RIoUJ1xzos2?= =?utf-8?q?BEEjxCc3CENxWVVL/CFQfWjQjkAW5wdgnJzUTO/pxTIBopa9EGK1JtMrarlJMeUEQ?= =?utf-8?q?4AHO/5uMh4jVFoz3tYSkjdIWNff+R0DmcdsUIUWp9OQjWDAVUogeVDGd2IZhY8wR6?= =?utf-8?q?JgD91DYK3VF0+7zWk5OdNa/OQcfalwSByjkM/3jkIbGL4YT7mpkToGdLFaW+KEtkC?= =?utf-8?q?RW3GmnkKP6M3M7l67Ok+g13r5VkoyltI9yLlUxSE0/KfA65aJ/ERdEw4yaF9eJEMM?= =?utf-8?q?b4c/vexTS26fKB4sx/6eS1QMNvp3VVhA0RUKztptWl7mWrRbsh0Y8S2RFtLh8Uga6?= =?utf-8?q?j5zchUuJ/278QYjKiqR2MghVfKKz6AZqA8daMBxpUzUCA0nf8fnhcNckFcIc5O4zq?= =?utf-8?q?nDfXYov0oxQD8FmOJ8mmPDtPmwfo1dVa2oSMjG5XygpJlpMvOLmJyp8c=3D?= X-Forefront-Antispam-Report: CIP:255.255.255.255;CTRY:;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:AM9PR04MB7586.eurprd04.prod.outlook.com;PTR:;CAT:NONE;SFS:(13230031)(52116005)(376005)(1800799015)(7416005)(366007)(921011)(38350700005);DIR:OUT;SFP:1102; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: =?utf-8?q?rrWQHZ8jwhSKL7j2KqoKDkePiwTK?= =?utf-8?q?q4m73vka4M1bSxPPz43ZejOZ0cOeuGhpbDfVKGsDY4sVT9tpCj2HIpSXUgkqDu4Up?= =?utf-8?q?lLY8d9jnIOC9KF1B17tbFdPeGq/fRafeOUcasalp9HTGEtPGvatYTIDvRPGA+fmLU?= =?utf-8?q?vyPd645A18P2PloezjdXgb8W9/1tk1siXPkVn2HPANBmhN62fEvttZQ4kE+X1GYSc?= =?utf-8?q?RgpvzGZK7Ev7gGV+MjwBebN9Jkn7RLinpXjPj9m1tyz42pKhdZ4PPjzN72xjkg5aG?= =?utf-8?q?Fgay/h8Rv7G1V4vn+T56cASy1h5gp/S9uIC0/wgsL394Dyc0T8sIUkBJPpY3Z1p+R?= =?utf-8?q?aNiXatZVyNmWZhoQbHhzjD6bVbtpqgzyWJm0xYw4xXUyw82sgjXrFQ6dGWfb8pCUU?= =?utf-8?q?arlcwuo/uET8PtENBvVG2PvXCmsgLTh0yQ0hEfSWIBsumeRNrjZm8seXjZoa9XpWA?= =?utf-8?q?XRwj4EFGdLMW3ygclfBgcvMExvLqqfS08pu3slwXdsrp4qpaZTkX0ZeEbmpk/t6oG?= =?utf-8?q?NUrhBCNMBju0LYSDlnJfRUVbG0PHxciBH8QQ8TMVs9rcwSobaj1i4C8wUAEJI7pYu?= =?utf-8?q?qkBa02YvYR8Ce9FPobHmw6ZA4kFJrtTG4iiQXdyLbBbZBNGiJrnfNu3TtZwaTVndC?= =?utf-8?q?yfFP/Bk8XzFL9TkKunZ9qlj5Zu0K9DYf/5l2TRIXZ5P1gHckWIgb+yL/sF4kEJZdO?= =?utf-8?q?4f6C18DbnvMrGhWaJgMpmEZPJXZ3h8gmnqsxZLbWqQeV06tX9Kij4tFjvQSXOZ5VU?= =?utf-8?q?9thBWOmAnE6FfAXvNBYXcUlIEv++AMjApTVwJd4APwNuFO2HgJqbEmWWZ/f/hIljQ?= =?utf-8?q?JQNydCJ6uQnrSTDJHcRaJlZ3HfI7KR1BCH/8l2eUgcniceuXFxylZ/1xbl1wnJaFg?= =?utf-8?q?wBQjEi31M7LFkeA5yioUkKNa4w55oCzg5t4xG3i1xGzj0MA4uTSg9nhEFDTkr7mNX?= =?utf-8?q?WeqZgbfbLng2cW3JkGeEbRndMW72qLo2f0v9LsbIV0VIqxO89/LN6T81pQBXwhD6d?= =?utf-8?q?www8ubtY6CBOg0w2ZyzQajx9Fo4F4LTArxjtE2q6ee6TiDyKCvMQVnb0G+6zDLEGe?= =?utf-8?q?sZHJ0DT/OxTRFaswiTO4us1cUE7C+IpeHBveoN6fxW8NTYPwYQulOWE0HsKWJKuFy?= =?utf-8?q?RDF1ZId5SyJNW2RdbRQ7xhLBpn5qUhc1zKARKj7YfbOHKLnP/ROttO60t1lhfi3W3?= =?utf-8?q?ZWCgM57XhZ/B0yR84k+8px6SswsG4/N/alUu7Be82ieJVTwNOk+xjFU9ve4tlmAvh?= =?utf-8?q?vRnh8xzgrkhDtRGW/QfGbDjXZVn2g4dc3ToEOnI9KOXeIaqAhfKbSDf/vTo7ziJpc?= =?utf-8?q?qoXVe70DkNR3rl14+OZ8d7ReevgAKp9bli7Rw8T9pjs8miAZLVHbJxWUVbSBwEoBc?= =?utf-8?q?xuiF7tmOVNNAj6xcJrdGkhIFd81tZCNVg5pL1Wkae5Nwtn99UZMYJFvhGN42Ov2dI?= =?utf-8?q?yUMRDTFnjhs24wzJ6NFN//J609BNLcauNemTG+wXJ3/FVajPu584fa4N4fz6p3BIx?= =?utf-8?q?uvKk/J8ISDfA?= X-OriginatorOrg: solid-run.com X-MS-Exchange-CrossTenant-Network-Message-Id: afcd37e9-adde-4ee4-c973-08dc831b9ea9 X-MS-Exchange-CrossTenant-AuthSource: AM9PR04MB7586.eurprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 02 Jun 2024 15:49:42.9678 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: a4a8aaf3-fd27-4e27-add2-604707ce5b82 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: rIoMiL/f2wpc1U1MWmhwHa7+eW8zuoyltW/3GDXDS+aA59PY83RZGzwmUHV8HTwI8SWdMKrZvjPsIu+McL/p0Q== X-MS-Exchange-Transport-CrossTenantHeadersStamped: AS8PR04MB7512 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20240602_085001_500632_B075522A X-CRM114-Status: GOOD ( 13.50 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Add description for the SolidRun CN9130 SoM, and Clearfog Base / Pro reference boards. The SoM has been designed as a pin-compatible replacement for the older Armada 388 based SoM. Therefore it supports the same boards and a similar feature set. Most notable upgrades: - 4x Cortex-A72 - 10Gbps SFP - Both eMMC and SD supported at the same time The developer first supporting this product at SolidRun decided to use different filenames for the DTBs: Armada 388 uses the full "clearfog" string while cn9130 uses the abbreviation "cf". This name is already hard-coded in pre-installed vendor u-boot and can not be changed easily. NOTICE IN CASE ANYBODY WANTS TO SELF-UPGRADE: CN9130 SoM has a different footprint from Armada 388 SoM. Components on the carrier board below the SoM may collide causing damage, such as on Clearfog Base. Signed-off-by: Josua Mayer Reviewed-by: Andrew Lunn --- arch/arm64/boot/dts/marvell/Makefile | 2 + arch/arm64/boot/dts/marvell/cn9130-cf-base.dts | 178 ++++++++++++ arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts | 375 +++++++++++++++++++++++++ arch/arm64/boot/dts/marvell/cn9130-cf.dtsi | 197 +++++++++++++ arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi | 160 +++++++++++ 5 files changed, 912 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 99b8cb3c49e1..019f2251d696 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -28,3 +28,5 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb dtb-$(CONFIG_ARCH_MVEBU) += ac5x-rd-carrier-cn9131.dtb dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-base.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-pro.dtb diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf-base.dts b/arch/arm64/boot/dts/marvell/cn9130-cf-base.dts new file mode 100644 index 000000000000..788a5c302b17 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-cf-base.dts @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2024 Josua Mayer + * + * DTS for SolidRun CN9130 Clearfog Base. + * + */ + +/dts-v1/; + +#include +#include + +#include "cn9130.dtsi" +#include "cn9130-sr-som.dtsi" +#include "cn9130-cf.dtsi" + +/ { + model = "SolidRun CN9130 Clearfog Base"; + compatible = "solidrun,cn9130-clearfog-base", + "solidrun,cn9130-sr-som", "marvell,cn9130"; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&rear_button_pins>; + pinctrl-names = "default"; + + button-0 { + /* The rear SW3 button */ + label = "Rear Button"; + gpios = <&cp0_gpio1 31 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = ; + }; + }; + + rfkill-m2-gnss { + compatible = "rfkill-gpio"; + label = "m.2 GNSS"; + radio-type = "gps"; + /* rfkill-gpio inverts internally */ + shutdown-gpios = <&expander0 9 GPIO_ACTIVE_HIGH>; + }; + + /* M.2 is B-keyed, so w-disable is for WWAN */ + rfkill-m2-wwan { + compatible = "rfkill-gpio"; + label = "m.2 WWAN"; + radio-type = "wwan"; + /* rfkill-gpio inverts internally */ + shutdown-gpios = <&expander0 8 GPIO_ACTIVE_HIGH>; + }; +}; + +/* SRDS #3 - SGMII 1GE */ +&cp0_eth1 { + phy = <&phy1>; + phys = <&cp0_comphy3 1>; + phy-mode = "sgmii"; + status = "okay"; +}; + +&cp0_eth2_phy { + /* + * Configure LEDs default behaviour: + * - LED[0]: link/activity: On/blink (green) + * - LED[1]: link is 100/1000Mbps: On (yellow) + * - LED[2]: high impedance (floating) + */ + marvell,reg-init = <3 16 0xf000 0x0a61>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_WAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_WAN; + default-state = "keep"; + }; + }; +}; + +&cp0_gpio1 { + sim-select-hog { + gpio-hog; + gpios = <27 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "sim-select"; + }; +}; + +&cp0_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + /* + * Configure LEDs default behaviour: + * - LED[0]: link/activity: On/blink (green) + * - LED[1]: link is 100/1000Mbps: On (yellow) + * - LED[2]: high impedance (floating) + * + * Configure LEDs electrical polarity + * - on-state: low + * - off-state: high (not hi-z, to avoid residual glow) + */ + marvell,reg-init = <3 16 0xf000 0x0a61>, + <3 17 0x003f 0x000a>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; +}; + +&cp0_pinctrl { + pinctrl-0 = <&sim_select_pins>; + pintrl-names = "default"; + + rear_button_pins: cp0-rear-button-pins { + marvell,pins = "mpp31"; + marvell,function = "gpio"; + }; + + sim_select_pins: cp0-sim-select-pins { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; +}; + +/* + * SRDS #4 - USB 3.0 host on M.2 connector + * USB-2.0 Host on Type-A connector + */ +&cp0_usb3_1 { + phys = <&cp0_comphy4 1>, <&cp0_utmi1>; + phy-names = "comphy", "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&expander0 { + m2-full-card-power-off-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_LOW>; + output-low; + line-name = "m2-full-card-power-off"; + }; + + m2-reset-hog { + gpio-hog; + gpios = <10 GPIO_ACTIVE_LOW>; + output-low; + line-name = "m2-reset"; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts b/arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts new file mode 100644 index 000000000000..a27fe0042867 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2024 Josua Mayer + * + * DTS for SolidRun CN9130 Clearfog Pro. + * + */ + +/dts-v1/; + +#include +#include + +#include "cn9130.dtsi" +#include "cn9130-sr-som.dtsi" +#include "cn9130-cf.dtsi" + +/ { + model = "SolidRun CN9130 Clearfog Pro"; + compatible = "solidrun,cn9130-clearfog-pro", + "solidrun,cn9130-sr-som", "marvell,cn9130"; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&rear_button_pins>; + pinctrl-names = "default"; + + button-0 { + /* The rear SW3 button */ + label = "Rear Button"; + gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = ; + }; + }; +}; + +/* SRDS #3 - SGMII 1GE to L2 switch */ +&cp0_eth1 { + phys = <&cp0_comphy3 1>; + phy-mode = "sgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&cp0_eth2_phy { + /* + * Configure LEDs default behaviour similar to switch ports: + * - LED[0]: link/activity: On/blink (green) + * - LED[1]: link is 100/1000Mbps: On (red) + * - LED[2]: high impedance (floating) + * + * Switch port defaults: + * - LED0: link/activity: On/blink (green) + * - LED1: link is 1000Mbps: On (red) + * + * Identical configuration is impossible with hardware offload. + */ + marvell,reg-init = <3 16 0xf000 0x0a61>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_WAN; + label = "LED2"; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_WAN; + label = "LED1"; + default-state = "keep"; + }; + }; +}; + +&cp0_mdio { + ethernet-switch@4 { + compatible = "marvell,mv88e6085"; + reg = <4>; + pinctrl-0 = <&dsa_clk_pins &dsa_pins>; + pinctrl-names = "default"; + reset-gpios = <&cp0_gpio1 27 GPIO_ACTIVE_LOW>; + interrupt-parent = <&cp0_gpio1>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + reg = <0>; + label = "lan5"; + phy = <&switch0phy0>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + label = "LED12"; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + label = "LED11"; + default-state = "keep"; + }; + }; + }; + + ethernet-port@1 { + reg = <1>; + label = "lan4"; + phy = <&switch0phy1>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + label = "LED10"; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + label = "LED9"; + default-state = "keep"; + }; + }; + }; + + ethernet-port@2 { + reg = <2>; + label = "lan3"; + phy = <&switch0phy2>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + label = "LED8"; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + label = "LED7"; + default-state = "keep"; + }; + }; + }; + + ethernet-port@3 { + reg = <3>; + label = "lan2"; + phy = <&switch0phy3>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + label = "LED6"; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + label = "LED5"; + default-state = "keep"; + }; + }; + }; + + ethernet-port@4 { + reg = <4>; + label = "lan1"; + phy = <&switch0phy4>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + label = "LED4"; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + label = "LED3"; + default-state = "keep"; + }; + }; + }; + + ethernet-port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&cp0_eth1>; + phy-mode = "sgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + ethernet-port@6 { + reg = <6>; + label = "lan6"; + phy-mode = "rgmii"; + + /* + * Because of mdio address conflict the + * external phy is not readable. + * Force a fixed link instead. + */ + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + switch0phy1: ethernet-phy@1 { + reg = <0x1>; + /* + * Indirectly configure default behaviour + * for port lan6 leds behind external phy. + * Internal PHYs are not using page 3, + * therefore writing to it is safe. + */ + marvell,reg-init = <3 16 0xf000 0x0a61>; + }; + + switch0phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + switch0phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + switch0phy4: ethernet-phy@4 { + reg = <0x4>; + }; + }; + + /* + * There is an external phy on the switch mdio bus. + * Because its mdio address collides with internal phys, + * it is not readable. + * + * mdio-external { + * compatible = "marvell,mv88e6xxx-mdio-external"; + * #address-cells = <1>; + * #size-cells = <0>; + * + * ethernet-phy@1 { + * reg = <0x1>; + * }; + * }; + */ + }; +}; + +/* SRDS #4 - miniPCIe (CON2) */ +&cp0_pcie1 { + num-lanes = <1>; + phys = <&cp0_comphy4 1>; + /* dw-pcie inverts internally */ + reset-gpios = <&expander0 2 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&cp0_pinctrl { + dsa_clk_pins: cp0-dsa-clk-pins { + marvell,pins = "mpp40"; + marvell,function = "synce1"; + }; + + dsa_pins: cp0-dsa-pins { + marvell,pins = "mpp27", "mpp29"; + marvell,function = "gpio"; + }; + + rear_button_pins: cp0-rear-button-pins { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + + cp0_spi1_cs1_pins: cp0-spi1-cs1-pins { + marvell,pins = "mpp12"; + marvell,function = "spi1"; + }; +}; + +&cp0_spi1 { + /* add pin for chip-select 1 on mikrobus */ + pinctrl-0 = <&cp0_spi1_pins &cp0_spi1_cs1_pins>; +}; + +/* USB-2.0 Host on Type-A connector */ +&cp0_usb3_1 { + phys = <&cp0_utmi1>; + phy-names = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&expander0 { + /* CON2 */ + pcie1-0-clkreq-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_LOW>; + input; + line-name = "pcie1.0-clkreq"; + }; + + /* CON2 */ + pcie1-0-w-disable-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_LOW>; + output-low; + line-name = "pcie1.0-w-disable"; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi new file mode 100644 index 000000000000..ad0ab34b6602 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2024 Josua Mayer + * + * DTS for common base of SolidRun CN9130 Clearfog Base and Pro. + * + */ + +/ { + aliases { + /* label nics same order as armada 388 clearfog */ + ethernet0 = &cp0_eth2; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth0; + i2c1 = &cp0_i2c1; + mmc1 = &cp0_sdhci0; + }; + + reg_usb3_vbus0: regulator-usb3-vbus0 { + compatible = "regulator-fixed"; + regulator-name = "vbus0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpios = <&expander0 6 GPIO_ACTIVE_LOW>; + }; + + sfp: sfp { + compatible = "sff,sfp"; + i2c-bus = <&cp0_i2c1>; + los-gpios = <&expander0 12 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&expander0 15 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&expander0 14 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&expander0 13 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <2000>; + }; +}; + +/* SRDS #2 - SFP+ 10GE */ +&cp0_eth0 { + managed = "in-band-status"; + phys = <&cp0_comphy2 0>; + phy-mode = "10gbase-r"; + sfp = <&sfp>; + status = "okay"; +}; + +&cp0_i2c0 { + expander0: gpio-expander@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-0 = <&expander0_pins>; + pinctrl-names = "default"; + interrupt-parent = <&cp0_gpio1>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + + /* CON3 */ + pcie2-0-clkreq-hog { + gpio-hog; + gpios = <0 GPIO_ACTIVE_LOW>; + input; + line-name = "pcie2.0-clkreq"; + }; + + /* CON3 */ + pcie2-0-w-disable-hog { + gpio-hog; + gpios = <3 GPIO_ACTIVE_LOW>; + output-low; + line-name = "pcie2.0-w-disable"; + }; + + usb3-ilimit-hog { + gpio-hog; + gpios = <5 GPIO_ACTIVE_LOW>; + input; + line-name = "usb3-current-limit"; + }; + + m2-devslp-hog { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "m.2 devslp"; + }; + }; + + /* The MCP3021 supports standard and fast modes */ + adc@4c { + compatible = "microchip,mcp3021"; + reg = <0x4c>; + }; + + carrier_eeprom: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <8>; + }; +}; + +&cp0_i2c1 { + /* + * Routed to SFP, M.2, mikrobus, and miniPCIe + * SFP limits this to 100kHz, and requires an AT24C01A/02/04 with + * address pins tied low, which takes addresses 0x50 and 0x51. + * Mikrobus doesn't specify beyond an I2C bus being present. + * PCIe uses ARP to assign addresses, or 0x63-0x64. + */ + clock-frequency = <100000>; + pinctrl-0 = <&cp0_i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +/* SRDS #5 - miniPCIe (CON3) */ +&cp0_pcie2 { + num-lanes = <1>; + phys = <&cp0_comphy5 2>; + /* dw-pcie inverts internally */ + reset-gpios = <&expander0 1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&cp0_pinctrl { + cp0_i2c1_pins: cp0-i2c1-pins { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + + cp0_mmc0_pins: cp0-mmc0-pins { + marvell,pins = "mpp43", "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + + mikro_spi_pins: cp0-spi1-cs1-pins { + marvell,pins = "mpp12"; + marvell,function = "spi1"; + }; + + mikro_uart_pins: cp0-uart-pins { + marvell,pins = "mpp2", "mpp3"; + marvell,function = "uart1"; + }; + + expander0_pins: cp0-expander0-pins { + marvell,pins = "mpp4"; + marvell,function = "gpio"; + }; +}; + +/* SRDS #0 - SATA on M.2 connector */ +&cp0_sata0 { + phys = <&cp0_comphy0 1>; + status = "okay"; + + /* only port 1 is available */ + /delete-node/ sata-port@0; +}; + +/* microSD */ +&cp0_sdhci0 { + pinctrl-0 = <&cp0_mmc0_pins>; + pinctrl-names = "default"; + bus-width = <4>; + no-1-8-v; + status = "okay"; +}; + +&cp0_spi1 { + /* CS1 for mikrobus */ + pinctrl-0 = <&cp0_spi1_pins &mikro_spi_pins>; +}; + +/* + * SRDS #1 - USB-3.0 Host on Type-A connector + * USB-2.0 Host on mPCI-e connector (CON3) + */ +&cp0_usb3_0 { + phys = <&cp0_comphy1 0>, <&cp0_utmi0>; + phy-names = "comphy", "utmi"; + vbus-supply = <®_usb3_vbus0>; + dr_mode = "host"; + status = "okay"; +}; + +&cp0_utmi { + status = "okay"; +}; + +/* mikrobus uart */ +&cp0_uart0 { + pinctrl-0 = <&mikro_uart_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi b/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi new file mode 100644 index 000000000000..4676e3488f54 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2024 Josua Mayer + * + */ + +#include + +/ { + model = "SolidRun CN9130 SoM"; + compatible = "solidrun,cn9130-sr-som", "marvell,cn9130"; + + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + i2c0 = &cp0_i2c0; + mmc0 = &ap_sdhci0; + rtc0 = &cp0_rtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + v_1_8: regulator-1-8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + /* requires assembly of R9307 */ + vhv: regulator-vhv-1-8 { + compatible = "regulator-fixed"; + regulator-name = "vhv-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + pinctrl-0 = <&cp0_reg_vhv_pins>; + pinctrl-names = "default"; + gpios = <&cp0_gpio2 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&ap_pinctrl { + ap_mmc0_pins: ap-mmc0-pins { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", "mpp4", "mpp5", + "mpp6", "mpp7", "mpp8", "mpp9", "mpp10", "mpp12"; + marvell,function = "sdio"; + /* + * mpp12 is emmc reset, function should be sdio (hw_rst), + * but pinctrl-mvebu does not support this. + * + * From pinctrl-mvebu.h: + * "The name will be used to switch to this setting in DT description, e.g. + * marvell,function = "uart2". subname is only for debugging purposes." + */ + }; +}; + +&ap_sdhci0 { + bus-width = <8>; + pinctrl-0 = <&ap_mmc0_pins>; + pinctrl-names = "default"; + vqmmc-supply = <&v_1_8>; + status = "okay"; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* for assembly with phy */ +&cp0_eth2 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_eth2_pins>; + phy-mode = "rgmii-id"; + phy = <&cp0_eth2_phy>; + status = "okay"; +}; + +&cp0_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + clock-frequency = <100000>; + status = "okay"; + + som_eeprom: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <8>; + }; +}; + +&cp0_mdio { + pinctrl-0 = <&cp0_mdio_pins>; + status = "okay"; + + /* assembly option */ + cp0_eth2_phy: ethernet-phy@0 { + reg = <0>; + }; +}; + +&cp0_spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi1_pins>; + /* max speed limited by a mux */ + spi-max-frequency = <1800000000>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + /* read command supports max. 50MHz */ + spi-max-frequency = <50000000>; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp0_eth2_pins: cp0-ge2-rgmii-pins { + marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47", + "mpp48", "mpp49", "mpp50", "mpp51", + "mpp52", "mpp53", "mpp54", "mpp55"; + /* docs call it "ge2", but cp110-pinctrl "ge1" */ + marvell,function = "ge1"; + }; + + cp0_i2c0_pins: cp0-i2c0-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + + cp0_mdio_pins: cp0-mdio-pins { + marvell,pins = "mpp40", "mpp41"; + marvell,function = "ge"; + }; + + cp0_spi1_pins: cp0-spi1-pins { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + + cp0_reg_vhv_pins: cp0-reg-vhv-pins { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + }; +}; + +/* AP default console */ +&uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; +};