diff mbox series

[1/2] arm64: dts: microchip: sparx5_pcb134: move non-MMIO nodes out of axi

Message ID 20240604114949.165223-1-krzysztof.kozlowski@linaro.org (mailing list archive)
State New, archived
Headers show
Series [1/2] arm64: dts: microchip: sparx5_pcb134: move non-MMIO nodes out of axi | expand

Commit Message

Krzysztof Kozlowski June 4, 2024, 11:49 a.m. UTC 
simple-bus nodes, so the "axi" node, should not have non-MMIO children
as pointed out by simple-bus schema dtbs_check:

  sparx5_pcb134.dtb: axi@600000000: i2c-mux-0: {'compatible': ... should not be valid under {'type': 'object'}
    from schema $id: http://devicetree.org/schemas/simple-bus.yaml#

Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/all/CAL_Jsq+PtL3HTKkA_gwTjb_i1mFZ+wW+qwin34HMYmwW7oNDFw@mail.gmail.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../dts/microchip/sparx5_pcb134_board.dtsi    | 372 +++++++++---------
 1 file changed, 194 insertions(+), 178 deletions(-)

Comments

Conor Dooley June 4, 2024, 6:01 p.m. UTC | #1 
On Tue, Jun 04, 2024 at 01:49:48PM +0200, Krzysztof Kozlowski wrote:
> simple-bus nodes, so the "axi" node, should not have non-MMIO children
> as pointed out by simple-bus schema dtbs_check:
> 
>   sparx5_pcb134.dtb: axi@600000000: i2c-mux-0: {'compatible': ... should not be valid under {'type': 'object'}
>     from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
> 
> Reported-by: Rob Herring <robh@kernel.org>
> Closes: https://lore.kernel.org/all/CAL_Jsq+PtL3HTKkA_gwTjb_i1mFZ+wW+qwin34HMYmwW7oNDFw@mail.gmail.com/
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

These two are pure moves, according to my colourMoved settings, so I've
chucked them on microchip-dt64.

Thanks,
Conor.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
index 2c5574734c9e..e60acc74e822 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
@@ -13,6 +13,20 @@  gpio-restart {
 		priority = <200>;
 	};
 
+	i2c0_imux: i2c-mux-0 {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+
+	i2c0_emux: i2c-mux-1 {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		led-0 {
@@ -248,6 +262,186 @@  led-47 {
 			default-state = "off";
 		};
 	};
+
+	sfp_eth12: sfp-eth12 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
+		tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth13: sfp-eth13 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
+		tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth14: sfp-eth14 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp3>;
+		tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth15: sfp-eth15 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp4>;
+		tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth48: sfp-eth48 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp5>;
+		tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth49: sfp-eth49 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp6>;
+		tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth50: sfp-eth50 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp7>;
+		tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth51: sfp-eth51 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp8>;
+		tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth52: sfp-eth52 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp9>;
+		tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth53: sfp-eth53 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp10>;
+		tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth54: sfp-eth54 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp11>;
+		tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth55: sfp-eth55 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp12>;
+		tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth56: sfp-eth56 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp13>;
+		tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth57: sfp-eth57 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp14>;
+		tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth58: sfp-eth58 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp15>;
+		tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth59: sfp-eth59 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp16>;
+		tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth60: sfp-eth60 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp17>;
+		tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth61: sfp-eth61 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp18>;
+		tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth62: sfp-eth62 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp19>;
+		tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth63: sfp-eth63 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp20>;
+		tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &sgpio0 {
@@ -385,21 +579,6 @@  i2cmux_11: i2cmux-11-pins {
 	};
 };
 
-&axi {
-	i2c0_imux: i2c-mux-0 {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-parent = <&i2c0>;
-	};
-	i2c0_emux: i2c-mux-1 {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-parent = <&i2c0>;
-	};
-};
-
 &i2c0_imux {
 	pinctrl-names =
 		"i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4",
@@ -535,169 +714,6 @@  phy64: ethernet-phy@64 {
 	};
 };
 
-&axi {
-	sfp_eth12: sfp-eth12 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp1>;
-		tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth13: sfp-eth13 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp2>;
-		tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth14: sfp-eth14 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp3>;
-		tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth15: sfp-eth15 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp4>;
-		tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth48: sfp-eth48 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp5>;
-		tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth49: sfp-eth49 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp6>;
-		tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth50: sfp-eth50 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp7>;
-		tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth51: sfp-eth51 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp8>;
-		tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth52: sfp-eth52 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp9>;
-		tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth53: sfp-eth53 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp10>;
-		tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth54: sfp-eth54 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp11>;
-		tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth55: sfp-eth55 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp12>;
-		tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth56: sfp-eth56 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp13>;
-		tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth57: sfp-eth57 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp14>;
-		tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth58: sfp-eth58 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp15>;
-		tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth59: sfp-eth59 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp16>;
-		tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth60: sfp-eth60 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp17>;
-		tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth61: sfp-eth61 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp18>;
-		tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth62: sfp-eth62 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp19>;
-		tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth63: sfp-eth63 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp20>;
-		tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
-	};
-};
-
 &switch {
 	ethernet-ports {
 		#address-cells = <1>;