| Message ID | 20240605153020.104717-3-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/3] arm64: dts: freescale: use defines for interrupts | expand |
> Subject: [PATCH 3/3] arm64: dts: imx8: use defines for interrupts > > Replace hard-coded interrupt flags with standard defines for readability. No > changes in resulting DTBs. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> > --- > arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 2 +- > arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi > b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi > index 90d1901df2b1..930e14fec423 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi > @@ -400,7 +400,7 @@ ptn5110: tcpc@50 { > pinctrl-0 = <&pinctrl_typec1>; > reg = <0x50>; > interrupt-parent = <&gpio2>; > - interrupts = <11 8>; > + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; > status = "okay"; > > typec1_con: connector { > diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts > b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts > index c024be33fbcc..6d002fc1b2be 100644 > --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts > +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts > @@ -193,7 +193,7 @@ light-sensor@44 { > compatible = "isil,isl29023"; > reg = <0x44>; > interrupt-parent = <&lsio_gpio4>; > - interrupts = <11 2>; > + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; > }; > > pressure-sensor@60 { > -- > 2.43.0 >
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index 90d1901df2b1..930e14fec423 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -400,7 +400,7 @@ ptn5110: tcpc@50 { pinctrl-0 = <&pinctrl_typec1>; reg = <0x50>; interrupt-parent = <&gpio2>; - interrupts = <11 8>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; status = "okay"; typec1_con: connector { diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts index c024be33fbcc..6d002fc1b2be 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -193,7 +193,7 @@ light-sensor@44 { compatible = "isil,isl29023"; reg = <0x44>; interrupt-parent = <&lsio_gpio4>; - interrupts = <11 2>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; }; pressure-sensor@60 {
Replace hard-coded interrupt flags with standard defines for readability. No changes in resulting DTBs. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)