From patchwork Sat Jun 8 18:04:45 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Laurent Pinchart X-Patchwork-Id: 13691070 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id BDD6CC25B76 for ; Sat, 8 Jun 2024 18:05:28 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=kaWnS0dYfy3QXR0C1BHw236sRzZ5w1FQxHxXEdCCQT0=; b=TvLTApHGTNvEWZ mkerGU7bu8gJjkClkq4BvOMyxRwpqq7C6ggyCX2BKxGezO9GbQ2Sg1ny9n3nHlThgONG9Qz5Dtsgd /ySUzKj1TmS9/6Pv5Qj2ZXsqzkmPG3YMld+dBvSTS9XWDh/R15XOtHTH0Fm2ZcsuA3GTIU3yexp/C dpBNs5sLAKiIZP4sFEE6ZK7u1jyOLxtcjR4AxyS4zlcmbAtHQPVpFwZvGynITYZiq6ebDE70nJXJL Ie1pVe64MrJuCGgGMt9kEnyxRLGZ1MQNRShIZHA0WLqrxLlfyoEJ33EhV3C2dnHrILniaM2I+NaRm 6n5rjhRlDrrrtkuL2VWQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.97.1 #2 (Red Hat Linux)) id 1sG0RK-00000000Vb6-2dR2; Sat, 08 Jun 2024 18:05:18 +0000 Received: from perceval.ideasonboard.com ([213.167.242.64]) by bombadil.infradead.org with esmtps (Exim 4.97.1 #2 (Red Hat Linux)) id 1sG0RB-00000000VXu-3elJ for linux-arm-kernel@lists.infradead.org; Sat, 08 Jun 2024 18:05:11 +0000 Received: from pendragon.ideasonboard.com (81-175-209-231.bb.dnainternet.fi [81.175.209.231]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id D400F6F48; Sat, 8 Jun 2024 20:04:57 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1717869898; bh=cEVQyMagBGpt7za7hzOmxyQJQaUDVtdqW24kYlGr8EQ=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=HxWrCzKY3iXXeGHDYtybNiZqFxAUGHe/HgTh2SudpHetCY6HOkS0UCi9Zv0B8v3m5 UOVoDGcCHbxGHf+MVt9k1ycMN141G1KmqghAi3HbbputlX0ZnI7jYtoCKisRomFgz1 cQbeeH7zQRKDNKVhFn6xkbHWmq7Yzboc3F4HflEY= From: Laurent Pinchart To: linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev Cc: devicetree@vger.kernel.org, Rob Herring , Krzysztof Kozlowski , Shawn Guo , Li Yang , Marco Contenti , Nate Drude , FrancescoFerraro , Harshesh Valera , Ahmad Fatoum Subject: [PATCH v3 2/4] arm64: dts: freescale: Add support for the Variscite DART-MX8M-PLUS SoM Date: Sat, 8 Jun 2024 21:04:45 +0300 Message-ID: <20240608180447.31378-3-laurent.pinchart@ideasonboard.com> X-Mailer: git-send-email 2.44.2 In-Reply-To: <20240608180447.31378-1-laurent.pinchart@ideasonboard.com> References: <20240608180447.31378-1-laurent.pinchart@ideasonboard.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20240608_110510_093634_7E37653B X-CRM114-Status: GOOD ( 15.47 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org The DART-MX8M-PLUS is an i.MX8MP-based SoM from Variscite. Add a device tree file that models its core modules, based on the device tree from Variscite's BSP. Sound support has been stripped out, as the downstream and upstream DT bindings differ for the related devices, and the schematics of the SoM isn't publicly available to check how those devices are wired up. Signed-off-by: Laurent Pinchart --- Changes since v2: - Move ethernet PHY GPIOs to separate pinctrl group - Fix and document PMIC output voltages - Add no-sd and no-sdio properties to usdhc3 - Set SION for I2C1 GPIO recovery pinctrl group --- .../boot/dts/freescale/imx8mp-var-dart.dtsi | 340 ++++++++++++++++++ 1 file changed, 340 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-var-dart.dtsi diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-dart.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-var-dart.dtsi new file mode 100644 index 000000000000..3b5bdddc7d52 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-var-dart.dtsi @@ -0,0 +1,340 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2019 NXP + * Copyright 2020-2021 Variscite Ltd. + * Copyright 2023 Ideas on Board Oy + */ + +/dts-v1/; + +#include "imx8mp.dtsi" + +/ { + aliases { + ethernet0 = &eqos; + ethernet1 = &fec; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0xc0000000>, + <0x1 0x00000000 0 0xc0000000>; + }; + + reg_eqos_phy: regulator-eqos-phy { + compatible = "regulator-fixed"; + regulator-name = "eqos-phy"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; +}; + +&A53_0 { + cpu-supply = <®_arm>; +}; + +&A53_1 { + cpu-supply = <®_arm>; +}; + +&A53_2 { + cpu-supply = <®_arm>; +}; + +&A53_3 { + cpu-supply = <®_arm>; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eth_phy>; + + eee-broken-1000t; + reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <20000>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic@25 { + compatible = "nxp,pca9450c"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + regulators { + /* + * Powers VDD_SOC. Set the output voltage range to the + * typical values for the nominal and overdrive modes. + */ + BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + /* + * Powers VDD_ARM. Set the output voltage range to the + * typical values for the nominal, overdrive and super + * overdrive modes. + */ + reg_arm: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + /* + * Likely powers various 3.3V peripherals. Set the + * output voltage to 3.3V. + */ + BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* + * Powers at least NVCC_SAI1_SAI5 and the ethernet PHY. + * The boot loader sets it to 1.85V to fix an ethernet + * PHY reset issue. Set the output voltage range to the + * i.MX8MP operating range for 1.8V I/O. + */ + BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-boot-on; + regulator-always-on; + }; + + /* + * Likely powers NVCC_DRAM. The board uses LPDDR4, set + * the output voltage to 1.1V. + */ + BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* Powers NVCC_SAI1_SAI5. */ + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16 + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16 + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16 + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16 + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16 + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16 + >; + }; + + pinctrl_eth_phy: ethphygrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x10 + MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x10 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2 + >; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x400001c2 + MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x400001c2 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x1c0 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6 + MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6 + MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6 + MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0xd6 + MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_SYNC 0xd6 + MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI3_RX_BCLK 0xd6 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 + >; + }; +};