diff mbox series

[v8,2/2] arm64: dts: amlogic: Add Amlogic S4 PWM

Message ID 20240613-s4-pwm-v8-2-b5bd0a768282@amlogic.com (mailing list archive)
State New, archived
Headers show
Series Add support for Amlogic S4 PWM | expand

Commit Message

Kelvin Zhang via B4 Relay June 13, 2024, 11:46 a.m. UTC
From: Junyi Zhao <junyi.zhao@amlogic.com>

Add device nodes for PWM_AB, PWM_CD, PWM_EF, PWM_GH and PWM_IJ
along with GPIO PIN configs of each channel.

Signed-off-by: Junyi Zhao <junyi.zhao@amlogic.com>
Reviewed-by: George Stark <gnstark@salutedevices.com>
Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 199 ++++++++++++++++++++++++++++++
 1 file changed, 199 insertions(+)

Comments

Uwe Kleine-König June 27, 2024, 5:50 a.m. UTC | #1
Hello,

On Thu, Jun 13, 2024 at 07:46:36PM +0800, Kelvin Zhang via B4 Relay wrote:
> From: Junyi Zhao <junyi.zhao@amlogic.com>
> 
> Add device nodes for PWM_AB, PWM_CD, PWM_EF, PWM_GH and PWM_IJ
> along with GPIO PIN configs of each channel.
> 
> Signed-off-by: Junyi Zhao <junyi.zhao@amlogic.com>
> Reviewed-by: George Stark <gnstark@salutedevices.com>
> Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 199 ++++++++++++++++++++++++++++++
>  1 file changed, 199 insertions(+)

What is the merge plan for this patch? Technically it's independent from
driver support (i.e. patch #1 in this series). The obvious options are:

 - I pick it up together with patch #1 via pwm
 - You pick it up via arm-soc

Can I please get an Ack iff you prefer the first option?

Best regards
Uwe
Kelvin Zhang June 27, 2024, 6:38 a.m. UTC | #2
On 2024/6/27 13:50, Uwe Kleine-König wrote:
> Hello,
> 
> On Thu, Jun 13, 2024 at 07:46:36PM +0800, Kelvin Zhang via B4 Relay wrote:
>> From: Junyi Zhao<junyi.zhao@amlogic.com>
>>
>> Add device nodes for PWM_AB, PWM_CD, PWM_EF, PWM_GH and PWM_IJ
>> along with GPIO PIN configs of each channel.
>>
>> Signed-off-by: Junyi Zhao<junyi.zhao@amlogic.com>
>> Reviewed-by: George Stark<gnstark@salutedevices.com>
>> Signed-off-by: Kelvin Zhang<kelvin.zhang@amlogic.com>
>> ---
>>   arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 199 ++++++++++++++++++++++++++++++
>>   1 file changed, 199 insertions(+)
> What is the merge plan for this patch? Technically it's independent from
> driver support (i.e. patch #1 in this series). The obvious options are:
> 
>   - I pick it up together with patch #1 via pwm
>   - You pick it up via arm-soc
> 
> Can I please get an Ack iff you prefer the first option?
> 
I understand that the DTS part is independent of the driver.

Hi Neil,
Are there any improvements needed for this patch?
If not, will you pick it up?
Thanks very much!

> Best regards
> Uwe
Neil Armstrong June 27, 2024, 7:52 a.m. UTC | #3
Hi Uwe,

On 27/06/2024 07:50, Uwe Kleine-König wrote:
> Hello,
> 
> On Thu, Jun 13, 2024 at 07:46:36PM +0800, Kelvin Zhang via B4 Relay wrote:
>> From: Junyi Zhao <junyi.zhao@amlogic.com>
>>
>> Add device nodes for PWM_AB, PWM_CD, PWM_EF, PWM_GH and PWM_IJ
>> along with GPIO PIN configs of each channel.
>>
>> Signed-off-by: Junyi Zhao <junyi.zhao@amlogic.com>
>> Reviewed-by: George Stark <gnstark@salutedevices.com>
>> Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com>
>> ---
>>   arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 199 ++++++++++++++++++++++++++++++
>>   1 file changed, 199 insertions(+)
> 
> What is the merge plan for this patch? Technically it's independent from
> driver support (i.e. patch #1 in this series). The obvious options are:
> 
>   - I pick it up together with patch #1 via pwm
>   - You pick it up via arm-soc
> 
> Can I please get an Ack iff you prefer the first option?

I can take but I was waiting for the driver part to be merged.

Anyway, I'll take, something less on the list!

Neil
> 
> Best regards
> Uwe
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index 10896f9df682..b686eacb9662 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -312,6 +312,160 @@  mux {
 					};
 				};
 
+				pwm_a_pins1: pwm-a-pins1 {
+					mux {
+						groups = "pwm_a_d";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_pins2: pwm-a-pins2 {
+					mux {
+						groups = "pwm_a_x";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_b_pins1: pwm-b-pins1 {
+					mux {
+						groups = "pwm_b_d";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_b_pins2: pwm-b-pins2 {
+					mux {
+						groups = "pwm_b_x";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_c_pins1: pwm-c-pins1 {
+					mux {
+						groups = "pwm_c_d";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_c_pins2: pwm-c-pins2 {
+					mux {
+						groups = "pwm_c_x";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_d_pins1: pwm-d-pins1 {
+					mux {
+						groups = "pwm_d_d";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_d_pins2: pwm-d-pins2 {
+					mux {
+						groups = "pwm_d_h";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_e_pins1: pwm-e-pins1 {
+					mux {
+						groups = "pwm_e_x";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_e_pins2: pwm-e-pins2 {
+					mux {
+						groups = "pwm_e_z";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_f_pins1: pwm-f-pins1 {
+					mux {
+						groups = "pwm_f_x";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_f_pins2: pwm-f-pins2 {
+					mux {
+						groups = "pwm_f_z";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_g_pins1: pwm-g-pins1 {
+					mux {
+						groups = "pwm_g_d";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_g_pins2: pwm-g-pins2 {
+					mux {
+						groups = "pwm_g_z";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_h_pins: pwm-h-pins {
+					mux {
+						groups = "pwm_h";
+						function = "pwm_h";
+					};
+				};
+
+				pwm_i_pins1: pwm-i-pins1 {
+					mux {
+						groups = "pwm_i_d";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_i_pins2: pwm-i-pins2 {
+					mux {
+						groups = "pwm_i_h";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_j_pins: pwm-j-pins {
+					mux {
+						groups = "pwm_j";
+						function = "pwm_j";
+					};
+				};
+
+				pwm_a_hiz_pins: pwm-a-hiz-pins {
+					mux {
+						groups = "pwm_a_hiz";
+						function = "pwm_a_hiz";
+					};
+				};
+
+				pwm_b_hiz_pins: pwm-b-hiz-pins {
+					mux {
+						groups = "pwm_b_hiz";
+						function = "pwm_b_hiz";
+					};
+				};
+
+				pwm_c_hiz_pins: pwm-c-hiz-pins {
+					mux {
+						groups = "pwm_c_hiz";
+						function = "pwm_c_hiz";
+					};
+				};
+
+				pwm_g_hiz_pins: pwm-g-hiz-pins {
+					mux {
+						groups = "pwm_g_hiz";
+						function = "pwm_g_hiz";
+					};
+				};
+
 				spicc0_pins_x: spicc0-pins_x {
 					mux {
 						groups = "spi_a_mosi_x",
@@ -399,6 +553,51 @@  spicc0: spi@50000 {
 				status = "disabled";
 			};
 
+			pwm_ab: pwm@58000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x58000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_A>,
+					 <&clkc_periphs CLKID_PWM_B>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@5a000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5a000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_C>,
+					 <&clkc_periphs CLKID_PWM_D>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ef: pwm@5c000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5c000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_E>,
+					 <&clkc_periphs CLKID_PWM_F>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_gh: pwm@5e000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5e000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_G>,
+					 <&clkc_periphs CLKID_PWM_H>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ij: pwm@60000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x60000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_I>,
+					 <&clkc_periphs CLKID_PWM_J>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
 			i2c0: i2c@66000 {
 				compatible = "amlogic,meson-axg-i2c";
 				reg = <0x0 0x66000 0x0 0x20>;