| Message ID | 20240615170417.3134517-2-jonas@kwiboo.se (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | rockchip: Enable 4K@60Hz mode on RK3228, RK3328, RK3399 and RK356x | expand |
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 07dcc949b899..b01efd6d042c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -850,8 +850,8 @@ cru: clock-controller@ff440000 { <0>, <24000000>, <24000000>, <24000000>, <15000000>, <15000000>, - <100000000>, <100000000>, - <100000000>, <100000000>, + <300000000>, <100000000>, + <400000000>, <100000000>, <50000000>, <100000000>, <100000000>, <100000000>, <50000000>, <50000000>,
The VOP on RK3328 needs to run at a higher rate in order to produce a proper 3840x2160 signal. Change to use 300MHz for VIO clk and 400MHz for VOP clk, same rates used by vendor 4.4 kernel. Fixes: 52e02d377a72 ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)