| Message ID | 20240618200551.1740178-1-tharvey@gateworks.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: imx8mp-venice-gw702x: add support for PHY LED's | expand |
On Tue, Jun 18, 2024 at 01:05:52PM -0700, Tim Harvey wrote: > The GW702x SoM has an onboard DP83867 RGMII GbE PHY that drives two > LED's (LED1 and LED2, skipping LED0). Add the appropriate dt bindings to > allow these PHY LED's to be controlled via a netdev trigger. > > Signed-off-by: Tim Harvey <tharvey@gateworks.com> Applied, thanks!
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi index 560c68e4da6d..6c75a5ecf56b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/net/ti-dp83867.h> / { @@ -102,6 +103,25 @@ ethphy0: ethernet-phy@0 { ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; }; };
The GW702x SoM has an onboard DP83867 RGMII GbE PHY that drives two LED's (LED1 and LED2, skipping LED0). Add the appropriate dt bindings to allow these PHY LED's to be controlled via a netdev trigger. Signed-off-by: Tim Harvey <tharvey@gateworks.com> --- .../dts/freescale/imx8mp-venice-gw702x.dtsi | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+)