| Message ID | 20240627-scp-invalid-resource-l1tcm-v1-1-7d221e6c495a@collabora.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | remoteproc: mediatek: Don't attempt to remap l1tcm memory if missing | expand |
On Thu, Jun 27, 2024 at 05:20:55PM -0400, Nícolas F. R. A. Prado wrote: > The current code doesn't check whether platform_get_resource_byname() > succeeded to get the l1tcm memory, which is optional, before attempting > to map it. This results in the following error message when it is > missing: > > mtk-scp 10500000.scp: error -EINVAL: invalid resource (null) > > Add a check so that the remapping is only attempted if the memory region > exists. This also allows to simplify the logic handling failure to > remap, since a failure then is always a failure. > > Fixes: ca23ecfdbd44 ("remoteproc/mediatek: support L1TCM") > Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Il 27/06/24 23:20, Nícolas F. R. A. Prado ha scritto: > The current code doesn't check whether platform_get_resource_byname() > succeeded to get the l1tcm memory, which is optional, before attempting > to map it. This results in the following error message when it is > missing: > > mtk-scp 10500000.scp: error -EINVAL: invalid resource (null) > > Add a check so that the remapping is only attempted if the memory region > exists. This also allows to simplify the logic handling failure to > remap, since a failure then is always a failure. > > Fixes: ca23ecfdbd44 ("remoteproc/mediatek: support L1TCM") > Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
On Thu, Jun 27, 2024 at 05:20:55PM -0400, Nícolas F. R. A. Prado wrote: > The current code doesn't check whether platform_get_resource_byname() > succeeded to get the l1tcm memory, which is optional, before attempting > to map it. This results in the following error message when it is > missing: > > mtk-scp 10500000.scp: error -EINVAL: invalid resource (null) > > Add a check so that the remapping is only attempted if the memory region > exists. This also allows to simplify the logic handling failure to > remap, since a failure then is always a failure. > > Fixes: ca23ecfdbd44 ("remoteproc/mediatek: support L1TCM") > Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> > --- > drivers/remoteproc/mtk_scp.c | 12 +++++------- > 1 file changed, 5 insertions(+), 7 deletions(-) > > diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c > index b885a9a041e4..b17757900cd7 100644 > --- a/drivers/remoteproc/mtk_scp.c > +++ b/drivers/remoteproc/mtk_scp.c > @@ -1344,14 +1344,12 @@ static int scp_probe(struct platform_device *pdev) > > /* l1tcm is an optional memory region */ > res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "l1tcm"); > - scp_cluster->l1tcm_base = devm_ioremap_resource(dev, res); > - if (IS_ERR(scp_cluster->l1tcm_base)) { > - ret = PTR_ERR(scp_cluster->l1tcm_base); > - if (ret != -EINVAL) > - return dev_err_probe(dev, ret, "Failed to map l1tcm memory\n"); > + if (res) { > + scp_cluster->l1tcm_base = devm_ioremap_resource(dev, res); > + if (IS_ERR(scp_cluster->l1tcm_base)) > + return dev_err_probe(dev, PTR_ERR(scp_cluster->l1tcm_base), > + "Failed to map l1tcm memory\n"); > > - scp_cluster->l1tcm_base = NULL; > - } else { Much better - I have applied this patch. Regards, Mathieu > scp_cluster->l1tcm_size = resource_size(res); > scp_cluster->l1tcm_phys = res->start; > } > > --- > base-commit: 0fc4bfab2cd45f9acb86c4f04b5191e114e901ed > change-id: 20240627-scp-invalid-resource-l1tcm-9f7cf45c17e6 > > Best regards, > -- > Nícolas F. R. A. Prado <nfraprado@collabora.com> >
diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c index b885a9a041e4..b17757900cd7 100644 --- a/drivers/remoteproc/mtk_scp.c +++ b/drivers/remoteproc/mtk_scp.c @@ -1344,14 +1344,12 @@ static int scp_probe(struct platform_device *pdev) /* l1tcm is an optional memory region */ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "l1tcm"); - scp_cluster->l1tcm_base = devm_ioremap_resource(dev, res); - if (IS_ERR(scp_cluster->l1tcm_base)) { - ret = PTR_ERR(scp_cluster->l1tcm_base); - if (ret != -EINVAL) - return dev_err_probe(dev, ret, "Failed to map l1tcm memory\n"); + if (res) { + scp_cluster->l1tcm_base = devm_ioremap_resource(dev, res); + if (IS_ERR(scp_cluster->l1tcm_base)) + return dev_err_probe(dev, PTR_ERR(scp_cluster->l1tcm_base), + "Failed to map l1tcm memory\n"); - scp_cluster->l1tcm_base = NULL; - } else { scp_cluster->l1tcm_size = resource_size(res); scp_cluster->l1tcm_phys = res->start; }
The current code doesn't check whether platform_get_resource_byname() succeeded to get the l1tcm memory, which is optional, before attempting to map it. This results in the following error message when it is missing: mtk-scp 10500000.scp: error -EINVAL: invalid resource (null) Add a check so that the remapping is only attempted if the memory region exists. This also allows to simplify the logic handling failure to remap, since a failure then is always a failure. Fixes: ca23ecfdbd44 ("remoteproc/mediatek: support L1TCM") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> --- drivers/remoteproc/mtk_scp.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) --- base-commit: 0fc4bfab2cd45f9acb86c4f04b5191e114e901ed change-id: 20240627-scp-invalid-resource-l1tcm-9f7cf45c17e6 Best regards,