| Message ID | 20240628120130.24076-1-didi.debian@cknow.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: rockchip: Add dma-names to uart1 on quartz64-b | expand |
On 2024-06-28 14:00, Diederik de Haas wrote: > There have been several attempts to set the dma-names property on the > SoC level (in rk356x.dtsi), but that appears to cause problems when set > on channels without flow control. > > Quoting part of a previous attempt for clarification: > >> Nah, enabling it for bluetooth is fine because you have flow control. >> My issues have been on channels without flow control. Without DMA it >> simply drops messages or the channel hangs until you close and reopen >> it. With DMA, when an overflow locks up the channel it is usually >> unavailable until the board is rebooted. > > Setting it on the board level for the bluetooth connection was deemed > safe, so do so for the Quartz64 Model B. > > This fixes the following error/warning: > > of_dma_request_slave_channel: dma-names property of node > '/serial@fe650000' missing or empty > dw-apb-uart fe650000.serial: failed to request DMA > > Signed-off-by: Diederik de Haas <didi.debian@cknow.org> > Link: https://libera.irclog.whitequark.org/armlinux/2024-02-29 > Link: https://lore.kernel.org/linux-rockchip/18284546.sWSEgdgrri@diego/ Thanks for this patch, it's looking good to me. Reviewed-by: Dragan Simic <dsimic@manjaro.org> > --- > arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts > b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts > index b908ce006c26..13e599a85eb8 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts > +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts > @@ -652,6 +652,7 @@ &tsadc { > }; > > &uart1 { > + dma-names = "tx", "rx"; > pinctrl-names = "default"; > pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; > status = "okay";
On Fri, 28 Jun 2024 14:00:43 +0200, Diederik de Haas wrote: > There have been several attempts to set the dma-names property on the > SoC level (in rk356x.dtsi), but that appears to cause problems when set > on channels without flow control. > > Quoting part of a previous attempt for clarification: > > > Nah, enabling it for bluetooth is fine because you have flow control. > > My issues have been on channels without flow control. Without DMA it > > simply drops messages or the channel hangs until you close and reopen > > it. With DMA, when an overflow locks up the channel it is usually > > unavailable until the board is rebooted. > > [...] Applied, thanks! [1/1] arm64: dts: rockchip: Add dma-names to uart1 on quartz64-b commit: bf6f26deb0e84089700c1b864f643442e262e16b Best regards,
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts index b908ce006c26..13e599a85eb8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts @@ -652,6 +652,7 @@ &tsadc { }; &uart1 { + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; status = "okay";