diff mbox series

[v2,1/7] arm64: dts: imx95: add edma[1..3] nodes

Message ID 20240701200728.1887467-1-Frank.Li@nxp.com (mailing list archive)
State New, archived
Headers show
Series [v2,1/7] arm64: dts: imx95: add edma[1..3] nodes | expand

Commit Message

Frank Li July 1, 2024, 8:07 p.m. UTC 
Add eDMA1, eDMA2 and eDMA3 support for iMX95.
Add dmas and dma-names for each peripheral, which use eDMA.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change from v1 to v2
- none
---
 arch/arm64/boot/dts/freescale/imx95.dtsi | 235 +++++++++++++++++++++++
 1 file changed, 235 insertions(+)

Comments

Shawn Guo Aug. 5, 2024, 8:08 a.m. UTC | #1 
On Mon, Jul 01, 2024 at 04:07:22PM -0400, Frank Li wrote:
> Add eDMA1, eDMA2 and eDMA3 support for iMX95.
> Add dmas and dma-names for each peripheral, which use eDMA.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

Applied all, thanks!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
index 1bbf9a0468f69..12f7ac52c2589 100644
--- a/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -3,6 +3,7 @@ 
  * Copyright 2024 NXP
  */
 
+#include <dt-bindings/dma/fsl-edma.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -405,6 +406,152 @@  aips2: bus@42000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 
+			edma2: dma-controller@42000000 {
+				compatible = "fsl,imx95-edma5";
+				reg = <0x42000000 0x210000>;
+				#dma-cells = <3>;
+				dma-channels = <64>;
+				interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "dma";
+			};
+
+			edma3: dma-controller@42210000 {
+				compatible = "fsl,imx95-edma5";
+				reg = <0x42210000 0x210000>;
+				#dma-cells = <3>;
+				dma-channels = <64>;
+				interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "dma";
+			};
+
 			mu7: mailbox@42430000 {
 				compatible = "fsl,imx95-mu";
 				reg = <0x42430000 0x10000>;
@@ -464,6 +611,8 @@  lpi2c3: i2c@42530000 {
 				clock-names = "per", "ipg";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				dmas = <&edma2 8 0 0>, <&edma2 9 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -476,6 +625,8 @@  lpi2c4: i2c@42540000 {
 				clock-names = "per", "ipg";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				dmas = <&edma2 10 0 0>, <&edma2 11 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -488,6 +639,8 @@  lpspi3: spi@42550000 {
 				clocks = <&scmi_clk IMX95_CLK_LPSPI3>,
 					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
 				clock-names = "per", "ipg";
+				dmas = <&edma2 12 0 0>, <&edma2 13 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -500,6 +653,8 @@  lpspi4: spi@42560000 {
 				clocks = <&scmi_clk IMX95_CLK_LPSPI4>,
 					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
 				clock-names = "per", "ipg";
+				dmas = <&edma2 14 0 0>, <&edma2 15 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -510,6 +665,8 @@  lpuart3: serial@42570000 {
 				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&scmi_clk IMX95_CLK_LPUART3>;
 				clock-names = "ipg";
+				dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -520,6 +677,8 @@  lpuart4: serial@42580000 {
 				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&scmi_clk IMX95_CLK_LPUART4>;
 				clock-names = "ipg";
+				dmas = <&edma2 20 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -530,6 +689,8 @@  lpuart5: serial@42590000 {
 				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&scmi_clk IMX95_CLK_LPUART5>;
 				clock-names = "ipg";
+				dmas = <&edma2 22 0 FSL_EDMA_RX>, <&edma2 21 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -540,6 +701,8 @@  lpuart6: serial@425a0000 {
 				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&scmi_clk IMX95_CLK_LPUART6>;
 				clock-names = "ipg";
+				dmas = <&edma2 24 0 FSL_EDMA_RX>, <&edma2 23 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -550,6 +713,8 @@  lpuart7: serial@42690000 {
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&scmi_clk IMX95_CLK_LPUART7>;
 				clock-names = "ipg";
+				dmas = <&edma2 26 0 FSL_EDMA_RX>, <&edma2 25 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -560,6 +725,8 @@  lpuart8: serial@426a0000 {
 				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&scmi_clk IMX95_CLK_LPUART8>;
 				clock-names = "ipg";
+				dmas = <&edma2 28 0 FSL_EDMA_RX>, <&edma2 27 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -572,6 +739,8 @@  lpi2c5: i2c@426b0000 {
 				clock-names = "per", "ipg";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				dmas = <&edma2 71 0 0>, <&edma2 72 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -584,6 +753,8 @@  lpi2c6: i2c@426c0000 {
 				clock-names = "per", "ipg";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				dmas = <&edma2 73 0 0>, <&edma2 74 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -596,6 +767,8 @@  lpi2c7: i2c@426d0000 {
 				clock-names = "per", "ipg";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				dmas = <&edma2 75 0 0>, <&edma2 76 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -608,6 +781,8 @@  lpi2c8: i2c@426e0000 {
 				clock-names = "per", "ipg";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				dmas = <&edma2 77 0 0>, <&edma2 78 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -620,6 +795,8 @@  lpspi5: spi@426f0000 {
 				clocks = <&scmi_clk IMX95_CLK_LPSPI5>,
 					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
 				clock-names = "per", "ipg";
+				dmas = <&edma2 79 0 0>, <&edma2 80 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -632,6 +809,8 @@  lpspi6: spi@42700000 {
 				clocks = <&scmi_clk IMX95_CLK_LPSPI6>,
 					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
 				clock-names = "per", "ipg";
+				dmas = <&edma2 81 0 0>, <&edma2 82 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -644,6 +823,8 @@  lpspi7: spi@42710000 {
 				clocks = <&scmi_clk IMX95_CLK_LPSPI7>,
 					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
 				clock-names = "per", "ipg";
+				dmas = <&edma2 83 0 0>, <&edma2 84 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -656,6 +837,8 @@  lpspi8: spi@42720000 {
 				clocks = <&scmi_clk IMX95_CLK_LPSPI8>,
 					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
 				clock-names = "per", "ipg";
+				dmas = <&edma2 85 0 0>, <&edma2 86 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -796,6 +979,46 @@  aips1: bus@44000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 
+			edma1: dma-controller@44000000 {
+				compatible = "fsl,imx93-edma3";
+				reg = <0x44000000 0x200000>;
+				#dma-cells = <3>;
+				dma-channels = <31>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
+				clock-names = "dma";
+			};
+
 			mu1: mailbox@44220000 {
 				compatible = "fsl,imx95-mu";
 				reg = <0x44220000 0x10000>;
@@ -830,6 +1053,8 @@  lpi2c1: i2c@44340000 {
 				clock-names = "per", "ipg";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				dmas = <&edma1 12 0 0>, <&edma1 13 0 FSL_EDMA_RX> ;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -842,6 +1067,8 @@  lpi2c2: i2c@44350000 {
 				clock-names = "per", "ipg";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				dmas = <&edma1 14 0 0>, <&edma1 15 0 FSL_EDMA_RX> ;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -854,6 +1081,8 @@  lpspi1: spi@44360000 {
 				clocks = <&scmi_clk IMX95_CLK_LPSPI1>,
 					 <&scmi_clk IMX95_CLK_BUSAON>;
 				clock-names = "per", "ipg";
+				dmas = <&edma1 16 0 FSL_EDMA_RX>, <&edma1 17 0 0> ;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -866,6 +1095,8 @@  lpspi2: spi@44370000 {
 				clocks = <&scmi_clk IMX95_CLK_LPSPI2>,
 					 <&scmi_clk IMX95_CLK_BUSAON>;
 				clock-names = "per", "ipg";
+				dmas = <&edma1 18 0 FSL_EDMA_RX>, <&edma1 19 0 0> ;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -876,6 +1107,8 @@  lpuart1: serial@44380000 {
 				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&scmi_clk IMX95_CLK_LPUART1>;
 				clock-names = "ipg";
+				dmas = <&edma1 21 0 FSL_EDMA_RX>, <&edma1 20 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -886,6 +1119,8 @@  lpuart2: serial@44390000 {
 				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&scmi_clk IMX95_CLK_LPUART2>;
 				clock-names = "ipg";
+				dmas = <&edma1 23 0 FSL_EDMA_RX>, <&edma1 22 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};