@@ -163,6 +163,25 @@ sound-wm8962 {
};
};
+&flexspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexspi1>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexspi1_reset>;
+ reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <200000000>;
+ spi-tx-bus-width = <8>;
+ spi-rx-bus-width = <8>;
+ };
+};
+
&lpi2c4 {
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -336,6 +355,28 @@ &wdog3 {
};
&scmi_iomuxc {
+ pinctrl_flexspi1: flexspi1grp {
+ fsl,pins = <
+ IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B 0x3fe
+ IMX95_PAD_XSPI1_SCLK__FLEXSPI1_A_SCLK 0x3fe
+ IMX95_PAD_XSPI1_DQS__FLEXSPI1_A_DQS 0x3fe
+ IMX95_PAD_XSPI1_DATA0__FLEXSPI1_A_DATA_BIT0 0x3fe
+ IMX95_PAD_XSPI1_DATA1__FLEXSPI1_A_DATA_BIT1 0x3fe
+ IMX95_PAD_XSPI1_DATA2__FLEXSPI1_A_DATA_BIT2 0x3fe
+ IMX95_PAD_XSPI1_DATA3__FLEXSPI1_A_DATA_BIT3 0x3fe
+ IMX95_PAD_XSPI1_DATA4__FLEXSPI1_A_DATA_BIT4 0x3fe
+ IMX95_PAD_XSPI1_DATA5__FLEXSPI1_A_DATA_BIT5 0x3fe
+ IMX95_PAD_XSPI1_DATA6__FLEXSPI1_A_DATA_BIT6 0x3fe
+ IMX95_PAD_XSPI1_DATA7__FLEXSPI1_A_DATA_BIT7 0x3fe
+ >;
+ };
+
+ pinctrl_flexspi1_reset: flexspi1-reset-grp {
+ fsl,pins = <
+ IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11 0x3fe
+ >;
+ };
+
pinctrl_hp: hpgrp {
fsl,pins = <
IMX95_PAD_GPIO_IO11__GPIO2_IO_BIT11 0x31e
Add flexspi and child flash node. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- Change from v1 to v2 - move gpio pinctrl inder flash@0 - add reset-gpios --- .../boot/dts/freescale/imx95-19x19-evk.dts | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+)