From patchwork Thu Jul 4 15:03:21 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Josua Mayer X-Patchwork-Id: 13723877 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 7980FC3271E for ; Thu, 4 Jul 2024 15:05:08 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:MIME-Version:Cc:To: In-Reply-To:References:Message-Id:Content-Transfer-Encoding:Content-Type: Subject:Date:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=4d05q49xYLdldzIAJAOLYnFweox24PXDvvTxGws5LHM=; b=iZbdoaPycJXW7DMRws8SvGvBKv S/fjJtVco5TnSwBccx4AZPCyita2NtlkNCXzzGivStuhqZyblX52D+/gz84UUePiFN8SzUbov9QjZ Z75RCVd6pt693L6nGTB382keWwzQOCG9HHpVcTA691Gdilu+Ae5xRIEprP3Hdpwp+aQJpw9qp8qMk YZ5bdcaNdJl3U4mD0qStYp+bpFYzBMeEh3N4uFRoYXXD5CEUNSHBXgl8RHbxVCWJpFm5OkCN6DPJ/ pZvfX5M24GuMzULlUzspiZV8scTh9DMeE8PMV5ywWLeCFXxdMqsj6wJgZCzrWvLSCvCse5MuTFVlQ 5SZLRUAw==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.97.1 #2 (Red Hat Linux)) id 1sPO0y-0000000DcCd-0jgg; Thu, 04 Jul 2024 15:04:52 +0000 Received: from mail-db5eur02on20701.outbound.protection.outlook.com ([2a01:111:f403:2608::701] helo=EUR02-DB5-obe.outbound.protection.outlook.com) by bombadil.infradead.org with esmtps (Exim 4.97.1 #2 (Red Hat Linux)) id 1sPO05-0000000DbpM-3Cy4 for linux-arm-kernel@lists.infradead.org; Thu, 04 Jul 2024 15:03:59 +0000 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=jKoGuu4GjVkyG/lQwliffiR7nX2MnR3NqsvqB42U1UeZYsf5i889z6XAySVdY8yqXDTXGwBJ3gyWmhEma2KZj/ixE54YD50y6ITUiOIghNpIhep9MyQcj9JjgqJRh2wi2FWnf/BIxOVbO8wOo7zADNBd4gpDl+8WMaTOYaL4O6jnsgMk7vT4hp84SAKEuaizPoDMbVDku8w1jfWKTqexYsnHcsAL8ZfrBM83c2Tbl1+r/cyHKBBioJ8EAnYh3i7KVZEflxA+G32TM9pxRtnec3npvZq1GuGpZcf6f1M667+wfKLczyrSwY+Q1XxTpruCF/Lv2EnJpsbXIGfD36cyfA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=4d05q49xYLdldzIAJAOLYnFweox24PXDvvTxGws5LHM=; b=djX0vI2+n9ZsTuX4sehraxB173AZk/1sFg+JykiRHgetx6Frdrge7WuWO2aJyqcA2WHni8zRFPmKjt1MxW8XhhfPrbU3r4MrH63foP7xSOBMSpXeh7nw85o6bPUbXsAsU/Urc8DkE54EEaxTLyV0bHEkt9atwV1iW+p9jiDC5dO1wDKMG9ExuPGmDzwrJJEmxSRsMW7qTFiXGqlwK46378BM4f9CjnlQWv6b2zBGIo2zzoBVZ0RnYQxxzd4TKsu8Pz8ZaqSddy+T1D3lL26flmOOmbhQWT9VSr2JmCzXaUgFAOY0+0Qsb273BTNBWu1H9+pEuztQirQ4I39waIRFDg== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=solid-run.com; dmarc=pass action=none header.from=solid-run.com; dkim=pass header.d=solid-run.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=solidrn.onmicrosoft.com; s=selector1-solidrn-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=4d05q49xYLdldzIAJAOLYnFweox24PXDvvTxGws5LHM=; b=Y5Zmh1Qk2cBAGg8CSDHUmK/Yy5hu9wp/ClnkcvyRaHF93QLg59ZKM27rJvFgN0fhLjbtRn2nfGLttOoPS5Oo/+AlubNlnsf1ITivgjqSGwf14jQOxnJe0/H4mw5hp8ffU/PICsqGF+4EeJayzPni2j6/U8rtTKGb1ZHejaI+uSs= Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=solid-run.com; Received: from AM9PR04MB7586.eurprd04.prod.outlook.com (2603:10a6:20b:2d5::17) by VI2PR04MB10714.eurprd04.prod.outlook.com (2603:10a6:800:26d::15) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.7741.29; Thu, 4 Jul 2024 15:03:46 +0000 Received: from AM9PR04MB7586.eurprd04.prod.outlook.com ([fe80::c04e:8a97:516c:5529]) by AM9PR04MB7586.eurprd04.prod.outlook.com ([fe80::c04e:8a97:516c:5529%5]) with mapi id 15.20.7741.017; Thu, 4 Jul 2024 15:03:46 +0000 From: Josua Mayer Date: Thu, 04 Jul 2024 17:03:21 +0200 Subject: [PATCH v7 3/5] arm64: dts: add description for solidrun cn9130 som and clearfog boards Message-Id: <20240704-cn9130-som-v7-3-eea606ba5faa@solid-run.com> References: <20240704-cn9130-som-v7-0-eea606ba5faa@solid-run.com> In-Reply-To: <20240704-cn9130-som-v7-0-eea606ba5faa@solid-run.com> To: Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Richard Cochran Cc: Yazan Shhady , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, Josua Mayer X-Mailer: b4 0.12.4 X-ClientProxiedBy: FR0P281CA0081.DEUP281.PROD.OUTLOOK.COM (2603:10a6:d10:1e::7) To AM9PR04MB7586.eurprd04.prod.outlook.com (2603:10a6:20b:2d5::17) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: AM9PR04MB7586:EE_|VI2PR04MB10714:EE_ X-MS-Office365-Filtering-Correlation-Id: 6f0eee58-e0a8-432e-8c3e-08dc9c3a80ad X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0;ARA:13230040|376014|7416014|52116014|1800799024|366016|38350700014; X-Microsoft-Antispam-Message-Info: =?utf-8?q?jyCz3kVQp2SZWopaZAUPvmbclU4kwnF?= =?utf-8?q?Bq70H4g9+x65qszMSq+6GpKOjPtmIukXpRodZC3G3LHXSoli71x9w3Z3aFfW9Tkyv?= =?utf-8?q?TDyTPlpQv6gBVdI7BuTpbbvjT6oM6KKRVfUb5pjRLKL/TNMBWE48sPWx5fKffnoXX?= =?utf-8?q?Tb44mz35chaME6x5tmo+psut/sHfXVIO+Xq584XYCCEIxMEHR4yZZMxjw5oL49lkL?= =?utf-8?q?msJWFs1RGaWWfp9btIDY5M63WMWqu7nF6E/rQYqwjatkzQ9CkoAwj5HbyPhnTqQ/A?= =?utf-8?q?GzrfRIMRjIu6E50aPtQ0nFdiWnEqv6pWROCdR7IVX27g/XD1uTjCiujp5gJVAorcq?= =?utf-8?q?piRB3UNWKg3jqsNDRL37yOp/hx+BorwEN6fLt3nA7fpSXIr7d9/xMX6VxRkXpm3vd?= =?utf-8?q?gyJIvHtWxmT4RVNQWw8IhM2B3ujcfhccxGnQEWSk3FBtyUF0s1jUG1/hKJY8kIPyw?= =?utf-8?q?WYjZ3eunGonq2mADwcxXFxxUNNLtYeBi9zpMh8Bb1lFdVn3mJz/I95jb6qpLacRRG?= =?utf-8?q?lVC0A6ijYwk0m1S9xeLHcUdzqEHAKVWJCWPexCOQZWZ0L6Hu+2I+yRvxcauBOeTpC?= =?utf-8?q?lSlbCrJM2MjBy+iIDxJQ7M2fQAKGTZDJB/YOfGxXujIHH8E/NKiE9nRDrIpMuQSM7?= =?utf-8?q?Bp5HavVytPIOuT2kb5gsZtp0qTC3yea/l0/tkqPumklbjRpGnjEj+Z3isF9hXZ8xd?= =?utf-8?q?gojHoxS3R+1aF0b5TLhHjgRgTZch5mapSFGzWhCXGr++g32gQp9Hde1jj4UKrikHi?= =?utf-8?q?Bo1/7kU6L5m1owMvkBFfnMLnWiOW16Rsligo7gSd90Q1u1Jp+hyjvrYpngidC6EuE?= =?utf-8?q?0t3KIDJM4wru5HXUnikGRb7L+OMLZgSavwVh+s8hhXg81lRv9MflELM+MgOylo5up?= =?utf-8?q?P8YG+/io9srAm+QWResWBEnvtDVy6ZLjiOec6GdzR7WObVhodxLXfSLUNrjFgF4sT?= =?utf-8?q?RR/eZRamKlwnuf1+FBSQgLTBMzoKWZB+rBKmWzjDH3nldSfN/ZijX5izaNSKUDX1u?= =?utf-8?q?cqYio0J++EfhNJwUUNih0q6wTk/4KucvxpJSKAig20sNjWRrxxzhy1ZRpuf67BsZc?= =?utf-8?q?yNb7QQXX7Ad8T1DZvNYEWRDv0OC0Ha2DNlxOq6RoHt0CoDXFTqdxTyvBIymwogPSy?= =?utf-8?q?ARj2TMmeb07eDtlhAAR14fZC6yLVOhUCRlvGSMN6HbDgjrRiCsxHM7qPv/twpNxNH?= =?utf-8?q?bPIVG0rqjEVYYB2fQOLp88F0IWN9jY0GFlmzShSlc7ENZHi5xs4sb0cYaq/tOb5ty?= =?utf-8?q?nza7QDE0g52ptEkFAm4EwuLOgl92osgIJj1sjngmr6GmK+ualUklP47QufmcJQSkV?= =?utf-8?q?foLRdr0Rf9taDZiFEwool9Rlj5Qz1j7sLQ=3D=3D?= X-Forefront-Antispam-Report: CIP:255.255.255.255;CTRY:;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:AM9PR04MB7586.eurprd04.prod.outlook.com;PTR:;CAT:NONE;SFS:(13230040)(376014)(7416014)(52116014)(1800799024)(366016)(38350700014);DIR:OUT;SFP:1102; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: =?utf-8?q?vcDzQy31tlBoCJS6lheOG6NMsMdh?= =?utf-8?q?0OIg0CMQaOMDBol0giDZpkIoGaFu3bTTxI5KaZhuDG/sAnzd2LtZU6wZDPNtqoPlp?= =?utf-8?q?mlQG+pbECeu9pEYHkbACscjmDPnZakh8DFo2THALqFEooH7YmAqsaDQ8YP42mQ6ti?= =?utf-8?q?HIbllTnBUYBfh6x/JO91Gnft+BecMx9HMc4bMO2iFLXGLrb/a8gLAYDK8Xa5i2WkN?= =?utf-8?q?2ZOyaTtBrLXyWgE/JzWFOnFJ9VVgSvktfHbKyoTDDDf/JAsPc6yE0yeYE4vPZDng1?= =?utf-8?q?prSkq870T/Rzh0WTDgeonjiVpG0PFHrc5iP0i/X2+9qyaTX3UoToUCRdl/anpLFLh?= =?utf-8?q?J3jb9SyZP9RU0/U3YwjRy5FWMe89CQCgKWoVQfxBnmkVMP8rHZD1XLVw3gn/v6fQr?= =?utf-8?q?P+otDtamqErO2185pF4dPvnBjkMtjtc8/akBF+n6LO9loBr0HGJQ8v13vEFCcZ3h3?= =?utf-8?q?GlIyivPARaJkG/6w51NHHyC1CiJAdYV21/abalm1AtN485gaCuB5H8lStFCxaCqia?= =?utf-8?q?7bcX1dWAxTlcxSAoCrz9JnXwQl6nD7aeCYRqwbNZNc7QuDfl9zEd2vcLqTUzwhYvk?= =?utf-8?q?OPv+IBrPRewYs4L1hUZonUFaCJ3TTWd7u7gsMy+X/x4UfE4K5vaFuvWIlOPMF2SH8?= =?utf-8?q?oDHdoImJSe6TanMi4CE/yi00bf4lXbR5kQV7jZ3rCcbjSKsNoa86jrqhUhUUyI1hn?= =?utf-8?q?3vhW10WE/Wyd6pyeuPryCwZzd+bbOkV7PetXDYXL76okqhHn1j+4/mZV6eFY2w8gZ?= =?utf-8?q?VxSGqNOcviPAmWKsCy4QjyeT3wASi0XAS9E6QhWlZ26vZNFDTFm26Ab8K1DXh1ouX?= =?utf-8?q?6XdbzTLLwnxptqVjEZF+6ahvzLc+yg4KxwgAKt5R5Cq/666DwGDwcEno/Nl2gUQA4?= =?utf-8?q?EcUWzuWSX3Ciq0Xlmyw6t//lRXO6dI3pjXnni8M4i4nNoZ6l21xUh1dmcTRUBLfV7?= =?utf-8?q?2pwkFBQARndnI5cZdMxUATnkX8Pird9N/sK5ji/ufMcoPK/G/IzLgn2yXmLezmoGb?= =?utf-8?q?yKw+5k/UdPqPb/KcS39jhMfdHl2yBYyMHiJKShKwg8NgkR5kxX/WCl4NyjEcuQIar?= =?utf-8?q?CEVoCWTgO4AnKi7wWma9VXJw0BoKwz2frVLOdQuf/0VL0Je0c16GXYchQzA7YvtNI?= =?utf-8?q?xcBGAtKgPI2j3Q1Rn0zjxdiKiMFqvRWlIzKkQEak6709S06hAJMWAwOWEnqk9vEY2?= =?utf-8?q?H+UuLupGubOWRDwaEgfOskSQDuQ1KmpB0E0VU+wvRzk9PJkbW4th8+jxYKL1WWhId?= =?utf-8?q?inuSKzs+jpWiPT3Ku2mM1leKTMQx/F487iAjjDCQ1Tjozg6DWyhmfyzhUAIo1dxnU?= =?utf-8?q?M6YIc94N9RPN9pcbXSgALT+K38RrHl2FFGWXiuuUO2ywaqu9rNL6PavV1Zfvw+IKA?= =?utf-8?q?Q6KA+gsSPhgxFJrZ6X7YWc+dMgFaLuyfgbT114h9o+/CNgMpANnIFCmD/MUDPWcsW?= =?utf-8?q?2u3u+I269EU+3ICpp3wg+9qTlD2OG9xrXIBKKfkD3aGBSFkEic5QcPaY8LHc7/xg7?= =?utf-8?q?wnvoz1wa+moW?= X-OriginatorOrg: solid-run.com X-MS-Exchange-CrossTenant-Network-Message-Id: 6f0eee58-e0a8-432e-8c3e-08dc9c3a80ad X-MS-Exchange-CrossTenant-AuthSource: AM9PR04MB7586.eurprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 04 Jul 2024 15:03:46.1536 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: a4a8aaf3-fd27-4e27-add2-604707ce5b82 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: IeSO10Ded9JTOYmDZrOUSbPVePrD6AdJKkwBYy3ZeQlpZ3zn4EQCu2XphqV/2HWpLVyTzF/AW1TtdSgMHh9X6A== X-MS-Exchange-Transport-CrossTenantHeadersStamped: VI2PR04MB10714 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20240704_080357_867784_88D01151 X-CRM114-Status: GOOD ( 14.45 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Add description for the SolidRun CN9130 SoM, and Clearfog Base / Pro reference boards. The SoM has been designed as a pin-compatible replacement for the older Armada 388 based SoM. Therefore it supports the same boards and a similar feature set. Most notable upgrades: - 4x Cortex-A72 - 10Gbps SFP - Both eMMC and SD supported at the same time The developer first supporting this product at SolidRun decided to use different filenames for the DTBs: Armada 388 uses the full "clearfog" string while cn9130 uses the abbreviation "cf". This name is already hard-coded in pre-installed vendor u-boot and can not be changed easily. NOTICE IN CASE ANYBODY WANTS TO SELF-UPGRADE: CN9130 SoM has a different footprint from Armada 388 SoM. Components on the carrier board below the SoM may collide causing damage, such as on Clearfog Base. Signed-off-by: Josua Mayer Reviewed-by: Andrew Lunn --- arch/arm64/boot/dts/marvell/Makefile | 2 + arch/arm64/boot/dts/marvell/cn9130-cf-base.dts | 178 ++++++++++++ arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts | 375 +++++++++++++++++++++++++ arch/arm64/boot/dts/marvell/cn9130-cf.dtsi | 197 +++++++++++++ arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi | 160 +++++++++++ 5 files changed, 912 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 99b8cb3c49e1..019f2251d696 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -28,3 +28,5 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb dtb-$(CONFIG_ARCH_MVEBU) += ac5x-rd-carrier-cn9131.dtb dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-base.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-pro.dtb diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf-base.dts b/arch/arm64/boot/dts/marvell/cn9130-cf-base.dts new file mode 100644 index 000000000000..788a5c302b17 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-cf-base.dts @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2024 Josua Mayer + * + * DTS for SolidRun CN9130 Clearfog Base. + * + */ + +/dts-v1/; + +#include +#include + +#include "cn9130.dtsi" +#include "cn9130-sr-som.dtsi" +#include "cn9130-cf.dtsi" + +/ { + model = "SolidRun CN9130 Clearfog Base"; + compatible = "solidrun,cn9130-clearfog-base", + "solidrun,cn9130-sr-som", "marvell,cn9130"; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&rear_button_pins>; + pinctrl-names = "default"; + + button-0 { + /* The rear SW3 button */ + label = "Rear Button"; + gpios = <&cp0_gpio1 31 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = ; + }; + }; + + rfkill-m2-gnss { + compatible = "rfkill-gpio"; + label = "m.2 GNSS"; + radio-type = "gps"; + /* rfkill-gpio inverts internally */ + shutdown-gpios = <&expander0 9 GPIO_ACTIVE_HIGH>; + }; + + /* M.2 is B-keyed, so w-disable is for WWAN */ + rfkill-m2-wwan { + compatible = "rfkill-gpio"; + label = "m.2 WWAN"; + radio-type = "wwan"; + /* rfkill-gpio inverts internally */ + shutdown-gpios = <&expander0 8 GPIO_ACTIVE_HIGH>; + }; +}; + +/* SRDS #3 - SGMII 1GE */ +&cp0_eth1 { + phy = <&phy1>; + phys = <&cp0_comphy3 1>; + phy-mode = "sgmii"; + status = "okay"; +}; + +&cp0_eth2_phy { + /* + * Configure LEDs default behaviour: + * - LED[0]: link/activity: On/blink (green) + * - LED[1]: link is 100/1000Mbps: On (yellow) + * - LED[2]: high impedance (floating) + */ + marvell,reg-init = <3 16 0xf000 0x0a61>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_WAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_WAN; + default-state = "keep"; + }; + }; +}; + +&cp0_gpio1 { + sim-select-hog { + gpio-hog; + gpios = <27 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "sim-select"; + }; +}; + +&cp0_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + /* + * Configure LEDs default behaviour: + * - LED[0]: link/activity: On/blink (green) + * - LED[1]: link is 100/1000Mbps: On (yellow) + * - LED[2]: high impedance (floating) + * + * Configure LEDs electrical polarity + * - on-state: low + * - off-state: high (not hi-z, to avoid residual glow) + */ + marvell,reg-init = <3 16 0xf000 0x0a61>, + <3 17 0x003f 0x000a>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; +}; + +&cp0_pinctrl { + pinctrl-0 = <&sim_select_pins>; + pintrl-names = "default"; + + rear_button_pins: cp0-rear-button-pins { + marvell,pins = "mpp31"; + marvell,function = "gpio"; + }; + + sim_select_pins: cp0-sim-select-pins { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; +}; + +/* + * SRDS #4 - USB 3.0 host on M.2 connector + * USB-2.0 Host on Type-A connector + */ +&cp0_usb3_1 { + phys = <&cp0_comphy4 1>, <&cp0_utmi1>; + phy-names = "comphy", "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&expander0 { + m2-full-card-power-off-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_LOW>; + output-low; + line-name = "m2-full-card-power-off"; + }; + + m2-reset-hog { + gpio-hog; + gpios = <10 GPIO_ACTIVE_LOW>; + output-low; + line-name = "m2-reset"; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts b/arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts new file mode 100644 index 000000000000..a27fe0042867 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2024 Josua Mayer + * + * DTS for SolidRun CN9130 Clearfog Pro. + * + */ + +/dts-v1/; + +#include +#include + +#include "cn9130.dtsi" +#include "cn9130-sr-som.dtsi" +#include "cn9130-cf.dtsi" + +/ { + model = "SolidRun CN9130 Clearfog Pro"; + compatible = "solidrun,cn9130-clearfog-pro", + "solidrun,cn9130-sr-som", "marvell,cn9130"; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&rear_button_pins>; + pinctrl-names = "default"; + + button-0 { + /* The rear SW3 button */ + label = "Rear Button"; + gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = ; + }; + }; +}; + +/* SRDS #3 - SGMII 1GE to L2 switch */ +&cp0_eth1 { + phys = <&cp0_comphy3 1>; + phy-mode = "sgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&cp0_eth2_phy { + /* + * Configure LEDs default behaviour similar to switch ports: + * - LED[0]: link/activity: On/blink (green) + * - LED[1]: link is 100/1000Mbps: On (red) + * - LED[2]: high impedance (floating) + * + * Switch port defaults: + * - LED0: link/activity: On/blink (green) + * - LED1: link is 1000Mbps: On (red) + * + * Identical configuration is impossible with hardware offload. + */ + marvell,reg-init = <3 16 0xf000 0x0a61>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_WAN; + label = "LED2"; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_WAN; + label = "LED1"; + default-state = "keep"; + }; + }; +}; + +&cp0_mdio { + ethernet-switch@4 { + compatible = "marvell,mv88e6085"; + reg = <4>; + pinctrl-0 = <&dsa_clk_pins &dsa_pins>; + pinctrl-names = "default"; + reset-gpios = <&cp0_gpio1 27 GPIO_ACTIVE_LOW>; + interrupt-parent = <&cp0_gpio1>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + reg = <0>; + label = "lan5"; + phy = <&switch0phy0>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + label = "LED12"; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + label = "LED11"; + default-state = "keep"; + }; + }; + }; + + ethernet-port@1 { + reg = <1>; + label = "lan4"; + phy = <&switch0phy1>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + label = "LED10"; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + label = "LED9"; + default-state = "keep"; + }; + }; + }; + + ethernet-port@2 { + reg = <2>; + label = "lan3"; + phy = <&switch0phy2>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + label = "LED8"; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + label = "LED7"; + default-state = "keep"; + }; + }; + }; + + ethernet-port@3 { + reg = <3>; + label = "lan2"; + phy = <&switch0phy3>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + label = "LED6"; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + label = "LED5"; + default-state = "keep"; + }; + }; + }; + + ethernet-port@4 { + reg = <4>; + label = "lan1"; + phy = <&switch0phy4>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + label = "LED4"; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + label = "LED3"; + default-state = "keep"; + }; + }; + }; + + ethernet-port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&cp0_eth1>; + phy-mode = "sgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + ethernet-port@6 { + reg = <6>; + label = "lan6"; + phy-mode = "rgmii"; + + /* + * Because of mdio address conflict the + * external phy is not readable. + * Force a fixed link instead. + */ + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + switch0phy1: ethernet-phy@1 { + reg = <0x1>; + /* + * Indirectly configure default behaviour + * for port lan6 leds behind external phy. + * Internal PHYs are not using page 3, + * therefore writing to it is safe. + */ + marvell,reg-init = <3 16 0xf000 0x0a61>; + }; + + switch0phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + switch0phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + switch0phy4: ethernet-phy@4 { + reg = <0x4>; + }; + }; + + /* + * There is an external phy on the switch mdio bus. + * Because its mdio address collides with internal phys, + * it is not readable. + * + * mdio-external { + * compatible = "marvell,mv88e6xxx-mdio-external"; + * #address-cells = <1>; + * #size-cells = <0>; + * + * ethernet-phy@1 { + * reg = <0x1>; + * }; + * }; + */ + }; +}; + +/* SRDS #4 - miniPCIe (CON2) */ +&cp0_pcie1 { + num-lanes = <1>; + phys = <&cp0_comphy4 1>; + /* dw-pcie inverts internally */ + reset-gpios = <&expander0 2 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&cp0_pinctrl { + dsa_clk_pins: cp0-dsa-clk-pins { + marvell,pins = "mpp40"; + marvell,function = "synce1"; + }; + + dsa_pins: cp0-dsa-pins { + marvell,pins = "mpp27", "mpp29"; + marvell,function = "gpio"; + }; + + rear_button_pins: cp0-rear-button-pins { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + + cp0_spi1_cs1_pins: cp0-spi1-cs1-pins { + marvell,pins = "mpp12"; + marvell,function = "spi1"; + }; +}; + +&cp0_spi1 { + /* add pin for chip-select 1 on mikrobus */ + pinctrl-0 = <&cp0_spi1_pins &cp0_spi1_cs1_pins>; +}; + +/* USB-2.0 Host on Type-A connector */ +&cp0_usb3_1 { + phys = <&cp0_utmi1>; + phy-names = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&expander0 { + /* CON2 */ + pcie1-0-clkreq-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_LOW>; + input; + line-name = "pcie1.0-clkreq"; + }; + + /* CON2 */ + pcie1-0-w-disable-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_LOW>; + output-low; + line-name = "pcie1.0-w-disable"; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi new file mode 100644 index 000000000000..ad0ab34b6602 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2024 Josua Mayer + * + * DTS for common base of SolidRun CN9130 Clearfog Base and Pro. + * + */ + +/ { + aliases { + /* label nics same order as armada 388 clearfog */ + ethernet0 = &cp0_eth2; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth0; + i2c1 = &cp0_i2c1; + mmc1 = &cp0_sdhci0; + }; + + reg_usb3_vbus0: regulator-usb3-vbus0 { + compatible = "regulator-fixed"; + regulator-name = "vbus0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpios = <&expander0 6 GPIO_ACTIVE_LOW>; + }; + + sfp: sfp { + compatible = "sff,sfp"; + i2c-bus = <&cp0_i2c1>; + los-gpios = <&expander0 12 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&expander0 15 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&expander0 14 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&expander0 13 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <2000>; + }; +}; + +/* SRDS #2 - SFP+ 10GE */ +&cp0_eth0 { + managed = "in-band-status"; + phys = <&cp0_comphy2 0>; + phy-mode = "10gbase-r"; + sfp = <&sfp>; + status = "okay"; +}; + +&cp0_i2c0 { + expander0: gpio-expander@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-0 = <&expander0_pins>; + pinctrl-names = "default"; + interrupt-parent = <&cp0_gpio1>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + + /* CON3 */ + pcie2-0-clkreq-hog { + gpio-hog; + gpios = <0 GPIO_ACTIVE_LOW>; + input; + line-name = "pcie2.0-clkreq"; + }; + + /* CON3 */ + pcie2-0-w-disable-hog { + gpio-hog; + gpios = <3 GPIO_ACTIVE_LOW>; + output-low; + line-name = "pcie2.0-w-disable"; + }; + + usb3-ilimit-hog { + gpio-hog; + gpios = <5 GPIO_ACTIVE_LOW>; + input; + line-name = "usb3-current-limit"; + }; + + m2-devslp-hog { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "m.2 devslp"; + }; + }; + + /* The MCP3021 supports standard and fast modes */ + adc@4c { + compatible = "microchip,mcp3021"; + reg = <0x4c>; + }; + + carrier_eeprom: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <8>; + }; +}; + +&cp0_i2c1 { + /* + * Routed to SFP, M.2, mikrobus, and miniPCIe + * SFP limits this to 100kHz, and requires an AT24C01A/02/04 with + * address pins tied low, which takes addresses 0x50 and 0x51. + * Mikrobus doesn't specify beyond an I2C bus being present. + * PCIe uses ARP to assign addresses, or 0x63-0x64. + */ + clock-frequency = <100000>; + pinctrl-0 = <&cp0_i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +/* SRDS #5 - miniPCIe (CON3) */ +&cp0_pcie2 { + num-lanes = <1>; + phys = <&cp0_comphy5 2>; + /* dw-pcie inverts internally */ + reset-gpios = <&expander0 1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&cp0_pinctrl { + cp0_i2c1_pins: cp0-i2c1-pins { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + + cp0_mmc0_pins: cp0-mmc0-pins { + marvell,pins = "mpp43", "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + + mikro_spi_pins: cp0-spi1-cs1-pins { + marvell,pins = "mpp12"; + marvell,function = "spi1"; + }; + + mikro_uart_pins: cp0-uart-pins { + marvell,pins = "mpp2", "mpp3"; + marvell,function = "uart1"; + }; + + expander0_pins: cp0-expander0-pins { + marvell,pins = "mpp4"; + marvell,function = "gpio"; + }; +}; + +/* SRDS #0 - SATA on M.2 connector */ +&cp0_sata0 { + phys = <&cp0_comphy0 1>; + status = "okay"; + + /* only port 1 is available */ + /delete-node/ sata-port@0; +}; + +/* microSD */ +&cp0_sdhci0 { + pinctrl-0 = <&cp0_mmc0_pins>; + pinctrl-names = "default"; + bus-width = <4>; + no-1-8-v; + status = "okay"; +}; + +&cp0_spi1 { + /* CS1 for mikrobus */ + pinctrl-0 = <&cp0_spi1_pins &mikro_spi_pins>; +}; + +/* + * SRDS #1 - USB-3.0 Host on Type-A connector + * USB-2.0 Host on mPCI-e connector (CON3) + */ +&cp0_usb3_0 { + phys = <&cp0_comphy1 0>, <&cp0_utmi0>; + phy-names = "comphy", "utmi"; + vbus-supply = <®_usb3_vbus0>; + dr_mode = "host"; + status = "okay"; +}; + +&cp0_utmi { + status = "okay"; +}; + +/* mikrobus uart */ +&cp0_uart0 { + pinctrl-0 = <&mikro_uart_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi b/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi new file mode 100644 index 000000000000..4676e3488f54 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2024 Josua Mayer + * + */ + +#include + +/ { + model = "SolidRun CN9130 SoM"; + compatible = "solidrun,cn9130-sr-som", "marvell,cn9130"; + + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + i2c0 = &cp0_i2c0; + mmc0 = &ap_sdhci0; + rtc0 = &cp0_rtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + v_1_8: regulator-1-8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + /* requires assembly of R9307 */ + vhv: regulator-vhv-1-8 { + compatible = "regulator-fixed"; + regulator-name = "vhv-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + pinctrl-0 = <&cp0_reg_vhv_pins>; + pinctrl-names = "default"; + gpios = <&cp0_gpio2 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&ap_pinctrl { + ap_mmc0_pins: ap-mmc0-pins { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", "mpp4", "mpp5", + "mpp6", "mpp7", "mpp8", "mpp9", "mpp10", "mpp12"; + marvell,function = "sdio"; + /* + * mpp12 is emmc reset, function should be sdio (hw_rst), + * but pinctrl-mvebu does not support this. + * + * From pinctrl-mvebu.h: + * "The name will be used to switch to this setting in DT description, e.g. + * marvell,function = "uart2". subname is only for debugging purposes." + */ + }; +}; + +&ap_sdhci0 { + bus-width = <8>; + pinctrl-0 = <&ap_mmc0_pins>; + pinctrl-names = "default"; + vqmmc-supply = <&v_1_8>; + status = "okay"; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* for assembly with phy */ +&cp0_eth2 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_eth2_pins>; + phy-mode = "rgmii-id"; + phy = <&cp0_eth2_phy>; + status = "okay"; +}; + +&cp0_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + clock-frequency = <100000>; + status = "okay"; + + som_eeprom: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <8>; + }; +}; + +&cp0_mdio { + pinctrl-0 = <&cp0_mdio_pins>; + status = "okay"; + + /* assembly option */ + cp0_eth2_phy: ethernet-phy@0 { + reg = <0>; + }; +}; + +&cp0_spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi1_pins>; + /* max speed limited by a mux */ + spi-max-frequency = <1800000000>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + /* read command supports max. 50MHz */ + spi-max-frequency = <50000000>; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp0_eth2_pins: cp0-ge2-rgmii-pins { + marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47", + "mpp48", "mpp49", "mpp50", "mpp51", + "mpp52", "mpp53", "mpp54", "mpp55"; + /* docs call it "ge2", but cp110-pinctrl "ge1" */ + marvell,function = "ge1"; + }; + + cp0_i2c0_pins: cp0-i2c0-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + + cp0_mdio_pins: cp0-mdio-pins { + marvell,pins = "mpp40", "mpp41"; + marvell,function = "ge"; + }; + + cp0_spi1_pins: cp0-spi1-pins { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + + cp0_reg_vhv_pins: cp0-reg-vhv-pins { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + }; +}; + +/* AP default console */ +&uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; +};