diff mbox series

[1/2] ARM: Refresh bcm2835_defconfig

Message ID 20240707-raspi-config-v1-1-3e122f2122e9@gmx.net (mailing list archive)
State New, archived
Headers show
Series ARM: Refresh Raspberry Pi defconfig and enable SMP support | expand

Commit Message

J. Neuschäfer July 7, 2024, 9:48 p.m. UTC
Regenerate bcm2835_defconfig with "make savedefconfig" in order to pick
up Kconfig changes that happened since the last refresh.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---
 arch/arm/configs/bcm2835_defconfig | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)


--
2.43.0

Comments

Florian Fainelli Oct. 10, 2024, 10:48 p.m. UTC | #1
On 7/7/24 14:48, Jonathan Neuschäfer wrote:
> Regenerate bcm2835_defconfig with "make savedefconfig" in order to pick
> up Kconfig changes that happened since the last refresh.
> 
> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>

Stefan, any objections to taking this change in isolation?

> ---
>   arch/arm/configs/bcm2835_defconfig | 11 +----------
>   1 file changed, 1 insertion(+), 10 deletions(-)
> 
> diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
> index b5f0bd8dd53699..da49dcfd359050 100644
> --- a/arch/arm/configs/bcm2835_defconfig
> +++ b/arch/arm/configs/bcm2835_defconfig
> @@ -9,7 +9,6 @@ CONFIG_LOG_BUF_SHIFT=18
>   CONFIG_CFS_BANDWIDTH=y
>   CONFIG_RT_GROUP_SCHED=y
>   CONFIG_CGROUP_FREEZER=y
> -CONFIG_CPUSETS=y
>   CONFIG_CGROUP_DEVICE=y
>   CONFIG_CGROUP_CPUACCT=y
>   CONFIG_CGROUP_PERF=y
> @@ -21,14 +20,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
>   CONFIG_EXPERT=y
>   CONFIG_KALLSYMS_ALL=y
>   CONFIG_PROFILING=y
> -CONFIG_CC_STACKPROTECTOR_REGULAR=y
> -CONFIG_CRASH_DUMP=y
> +CONFIG_KEXEC=y
>   CONFIG_ARCH_MULTI_V6=y
>   CONFIG_ARCH_BCM=y
>   CONFIG_ARCH_BCM2835=y
> -CONFIG_AEABI=y
> -CONFIG_SECCOMP=y
> -CONFIG_KEXEC=y
>   CONFIG_CPU_FREQ=y
>   CONFIG_CPU_FREQ_STAT=y
>   CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
> @@ -103,13 +98,11 @@ CONFIG_REGULATOR=y
>   CONFIG_REGULATOR_FIXED_VOLTAGE=y
>   CONFIG_REGULATOR_GPIO=y
>   CONFIG_MEDIA_SUPPORT=y
> -CONFIG_MEDIA_CAMERA_SUPPORT=y
>   CONFIG_DRM=y
>   CONFIG_DRM_V3D=y
>   CONFIG_DRM_VC4=y
>   CONFIG_DRM_SIMPLEDRM=y
>   CONFIG_FB=y
> -CONFIG_FRAMEBUFFER_CONSOLE=y
>   CONFIG_SOUND=y
>   CONFIG_SND=y
>   CONFIG_SND_SOC=y
> @@ -178,8 +171,6 @@ CONFIG_PRINTK_TIME=y
>   CONFIG_BOOT_PRINTK_DELAY=y
>   CONFIG_DYNAMIC_DEBUG=y
>   CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
> -# CONFIG_ENABLE_MUST_CHECK is not set
> -CONFIG_LOCKUP_DETECTOR=y
>   CONFIG_DEBUG_FS=y
>   CONFIG_KGDB=y
>   CONFIG_KGDB_KDB=y
> 
> --
> 2.43.0
>
Stefan Wahren Oct. 10, 2024, 11:03 p.m. UTC | #2
Hi Florian,

Am 11.10.24 um 00:48 schrieb Florian Fainelli:
> On 7/7/24 14:48, Jonathan Neuschäfer wrote:
>> Regenerate bcm2835_defconfig with "make savedefconfig" in order to pick
>> up Kconfig changes that happened since the last refresh.
>>
>> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
>
> Stefan, any objections to taking this change in isolation?
sure this would apply, but isn't this outdated yet?

Btw please look at

https://lore.kernel.org/linux-arm-kernel/20240910-fix-riscv-rt_group_sched-v3-4-486e75e5ae6d@gmail.com/
diff mbox series

Patch

diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index b5f0bd8dd53699..da49dcfd359050 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -9,7 +9,6 @@  CONFIG_LOG_BUF_SHIFT=18
 CONFIG_CFS_BANDWIDTH=y
 CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_FREEZER=y
-CONFIG_CPUSETS=y
 CONFIG_CGROUP_DEVICE=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_CGROUP_PERF=y
@@ -21,14 +20,10 @@  CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
-CONFIG_CC_STACKPROTECTOR_REGULAR=y
-CONFIG_CRASH_DUMP=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_BCM=y
 CONFIG_ARCH_BCM2835=y
-CONFIG_AEABI=y
-CONFIG_SECCOMP=y
-CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
@@ -103,13 +98,11 @@  CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_DRM=y
 CONFIG_DRM_V3D=y
 CONFIG_DRM_VC4=y
 CONFIG_DRM_SIMPLEDRM=y
 CONFIG_FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
@@ -178,8 +171,6 @@  CONFIG_PRINTK_TIME=y
 CONFIG_BOOT_PRINTK_DELAY=y
 CONFIG_DYNAMIC_DEBUG=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_LOCKUP_DETECTOR=y
 CONFIG_DEBUG_FS=y
 CONFIG_KGDB=y
 CONFIG_KGDB_KDB=y