diff mbox series

[v2] arm64: dts: amlogic: enable some device nodes for S4

Message ID 20240709-s4_node-v2-1-b9a218603c31@amlogic.com (mailing list archive)
State New, archived
Headers show
Series [v2] arm64: dts: amlogic: enable some device nodes for S4 | expand

Commit Message

Xianwei Zhao via B4 Relay July 9, 2024, 9:32 a.m. UTC 
From: Xianwei Zhao <xianwei.zhao@amlogic.com>

Enable more device nodes for AQ222 base S4, including
SD, regulator and ethnernet node.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
Add more device nodes for S4.
---
Changes in v2:
- Delete status of regulator-vddcpu node, use default status OK.
- Link to v1: https://lore.kernel.org/r/20240705-s4_node-v1-1-646ca7ac4f09@amlogic.com
---
 .../boot/dts/amlogic/meson-s4-s805x2-aq222.dts     | 145 +++++++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-s4.dtsi          | 128 ++++++++++++++++++
 2 files changed, 273 insertions(+)


---
base-commit: 338c92a5d1956f1841f84b86923087676d1d0cea
change-id: 20240705-s4_node-8110e3286c0c

Best regards,

Comments

Neil Armstrong July 9, 2024, 3:28 p.m. UTC | #1 
Hi,

On Tue, 09 Jul 2024 17:32:03 +0800, Xianwei Zhao wrote:
> Enable more device nodes for AQ222 base S4, including
> SD, regulator and ethnernet node.
> 
> 

Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.11/arm64-dt)

[1/1] arm64: dts: amlogic: enable some device nodes for S4
      https://git.kernel.org/amlogic/c/d3cc1daf38aaa0dd6546dd915ce5d536c250f3eb

These changes has been applied on the intermediate git tree [1].

The v6.11/arm64-dt branch will then be sent via a formal Pull Request to the Linux SoC maintainers
for inclusion in their intermediate git branches in order to be sent to Linus during
the next merge window, or sooner if it's a set of fixes.

In the cases of fixes, those will be merged in the current release candidate
kernel and as soon they appear on the Linux master branch they will be
backported to the previous Stable and Long-Stable kernels [2].

The intermediate git branches are merged daily in the linux-next tree [3],
people are encouraged testing these pre-release kernels and report issues on the
relevant mailing-lists.

If problems are discovered on those changes, please submit a signed-off-by revert
patch followed by a corrective changeset.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
[3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
index 983caddc409c..6730c44642d2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
@@ -34,6 +34,111 @@  secmon_reserved: secmon@5000000 {
 			no-map;
 		};
 	};
+
+	sdio_32k: sdio-32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&sdio_32k>;
+		clock-names = "ext_clock";
+	};
+
+	main_12v: regulator-main-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	vddio_ao1v8: regulator-vddio-ao1v8 {
+	       compatible = "regulator-fixed";
+	       regulator-name = "VDDIO_AO1V8";
+	       regulator-min-microvolt = <1800000>;
+	       regulator-max-microvolt = <1800000>;
+	       vin-supply = <&vddao_3v3>;
+	       regulator-always-on;
+	};
+
+	/* SY8120B1ABC DC/DC Regulator. */
+	vddcpu: regulator-vddcpu {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <689000>;
+		regulator-max-microvolt = <1049000>;
+
+		vin-supply = <&main_12v>;
+
+		pwms = <&pwm_ij 1 1500 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+		/* Voltage Duty-Cycle */
+		voltage-table = <1049000 0>,
+				<1039000 3>,
+				<1029000 6>,
+				<1019000 9>,
+				<1009000 12>,
+				<999000 14>,
+				<989000 17>,
+				<979000 20>,
+				<969000 23>,
+				<959000 26>,
+				<949000 29>,
+				<939000 31>,
+				<929000 34>,
+				<919000 37>,
+				<909000 40>,
+				<899000 43>,
+				<889000 45>,
+				<879000 48>,
+				<869000 51>,
+				<859000 54>,
+				<849000 56>,
+				<839000 59>,
+				<829000 62>,
+				<819000 65>,
+				<809000 68>,
+				<799000 70>,
+				<789000 73>,
+				<779000 76>,
+				<769000 79>,
+				<759000 81>,
+				<749000 84>,
+				<739000 87>,
+				<729000 89>,
+				<719000 92>,
+				<709000 95>,
+				<699000 98>,
+				<689000 100>;
+	};
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins1>;
+	pinctrl-names = "default";
+};
+
+&pwm_ij {
+	status = "okay";
 };
 
 &uart_b {
@@ -46,6 +151,40 @@  &ir {
 	pinctrl-names = "default";
 };
 
+&sdio {
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	no-sd;
+	no-mmc;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_ao1v8>;
+};
+
+&sd {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
 &nand {
 	status = "okay";
 	#address-cells = <1>;
@@ -90,3 +229,9 @@  &spicc0 {
 	pinctrl-0 = <&spicc0_pins_x>;
 	cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>;
 };
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index b686eacb9662..c11c947fa18c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -10,6 +10,7 @@ 
 #include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
 #include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h>
 #include <dt-bindings/power/meson-s4-power.h>
+#include <dt-bindings/reset/amlogic,meson-s4-reset.h>
 
 / {
 	cpus {
@@ -466,6 +467,93 @@  mux {
 					};
 				};
 
+				sdcard_pins: sdcard-pins {
+					mux {
+						groups = "sdcard_d0_c",
+							 "sdcard_d1_c",
+							 "sdcard_d2_c",
+							 "sdcard_d3_c",
+							 "sdcard_clk_c",
+							 "sdcard_cmd_c";
+						function = "sdcard";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdcard_clk_gate_pins: sdcard-clk-gate-pins {
+					mux {
+						groups = "GPIOC_4";
+						function = "gpio_periphs";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				emmc_pins: emmc-pins {
+					mux-0 {
+						groups = "emmc_nand_d0",
+							 "emmc_nand_d1",
+							 "emmc_nand_d2",
+							 "emmc_nand_d3",
+							 "emmc_nand_d4",
+							 "emmc_nand_d5",
+							 "emmc_nand_d6",
+							 "emmc_nand_d7",
+							 "emmc_cmd";
+						function = "emmc";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+					mux-1 {
+						groups = "emmc_clk";
+						function = "emmc";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				emmc_ds_pins: emmc-ds-pins {
+					mux {
+						groups = "emmc_nand_ds";
+						function = "emmc";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				emmc_clk_gate_pins: emmc-clk-gate-pins {
+					mux {
+						groups = "GPIOB_8";
+						function = "gpio_periphs";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdio_pins: sdio-pins {
+					mux {
+						groups = "sdio_d0",
+							 "sdio_d1",
+							 "sdio_d2",
+							 "sdio_d3",
+							 "sdio_clk",
+							 "sdio_cmd";
+						function = "sdio";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdio_clk_gate_pins: sdio-clk-gate-pins {
+					mux {
+						groups = "GPIOX_4";
+						function = "gpio_periphs";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
 				spicc0_pins_x: spicc0-pins_x {
 					mux {
 						groups = "spi_a_mosi_x",
@@ -712,5 +800,45 @@  mdio0: mdio {
 				compatible = "snps,dwmac-mdio";
 			};
 		};
+
+		sdio: mmc@fe088000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xfe088000 0x0 0x800>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc_periphs CLKID_SDEMMC_A>,
+				 <&xtal>,
+				 <&clkc_pll CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_A>;
+			cap-sdio-irq;
+			keep-power-in-suspend;
+			status = "disabled";
+		};
+
+		sd: mmc@fe08a000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xfe08a000 0x0 0x800>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_periphs CLKID_SDEMMC_B>,
+				 <&clkc_periphs CLKID_SD_EMMC_B>,
+				 <&clkc_pll CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_B>;
+			status = "disabled";
+		};
+
+		emmc: mmc@fe08c000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xfe08c000 0x0 0x800>;
+			interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_periphs CLKID_NAND>,
+				 <&xtal>,
+				 <&clkc_pll CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_NAND_EMMC>;
+			no-sdio;
+			no-sd;
+			status = "disabled";
+		};
 	};
 };