| Message ID | 20240709132906.3198927-14-dan.scally@ideasonboard.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add Arm Mali-C55 Image Signal Processor Driver | expand |
Hi Dan, Thank you for the patch. On Tue, Jul 09, 2024 at 02:29:01PM +0100, Daniel Scally wrote: > On ISP_START, fill the stats buffer by reading out the metering space > in the ISP's memory. This is done for the non-active config just as > the dma transfer of the registers is. To acheive that, move the s/acheive/achieve/ > checking of the current config outside of mali_c55_swap_next_config() > so we can use it for both functions. > > Acked-by: Nayden Kanchev <nayden.kanchev@arm.com> > Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> > Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> > Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> > --- > Changes in v6: > > - None > > Changes in v5: > > - New patch > > .../platform/arm/mali-c55/mali-c55-core.c | 34 ++++++++++++++----- > 1 file changed, 26 insertions(+), 8 deletions(-) > > diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c > index eedc8f450184..ed0db34767a4 100644 > --- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c > +++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c > @@ -567,15 +567,9 @@ static int mali_c55_check_hwcfg(struct mali_c55 *mali_c55) > return 0; > } > > -static void mali_c55_swap_next_config(struct mali_c55 *mali_c55) > +static void mali_c55_swap_next_config(struct mali_c55 *mali_c55, u32 next_config) > { > struct mali_c55_context *ctx = mali_c55_get_active_context(mali_c55); > - u32 curr_config, next_config; > - > - curr_config = mali_c55_read(mali_c55, MALI_C55_REG_PING_PONG_READ); > - curr_config = (curr_config & MALI_C55_REG_PING_PONG_READ_MASK) > - >> (ffs(MALI_C55_REG_PING_PONG_READ_MASK) - 1); > - next_config = curr_config ^ 1; > > mali_c55_update_bits(mali_c55, MALI_C55_REG_MCU_CONFIG, > MALI_C55_REG_MCU_CONFIG_WRITE_MASK, > @@ -588,6 +582,7 @@ static irqreturn_t mali_c55_isr(int irq, void *context) > { > struct device *dev = context; > struct mali_c55 *mali_c55 = dev_get_drvdata(dev); > + u32 curr_config, next_config; > u32 interrupt_status; > unsigned int i, j; > > @@ -612,7 +607,30 @@ static irqreturn_t mali_c55_isr(int irq, void *context) > for (j = i; j < MALI_C55_NUM_CAP_DEVS; j++) > mali_c55_set_next_buffer(&mali_c55->cap_devs[j]); > > - mali_c55_swap_next_config(mali_c55); > + /* > + * When the ISP starts a frame we have some work to do: > + * > + * 1. Copy over the config for the **next** frame > + * 2. Read out the metering stats for the **last** frame > + */ > + > + curr_config = mali_c55_read(mali_c55, > + MALI_C55_REG_PING_PONG_READ); > + curr_config &= MALI_C55_REG_PING_PONG_READ_MASK; > + curr_config >>= ffs(MALI_C55_REG_PING_PONG_READ_MASK) - 1; > + next_config = curr_config ^ 1; > + > + /* > + * The ordering of these two is currently important as > + * mali_c55_stats_fill_buffer() is asynchronous whereas > + * mali_c55_swap_next_config() is not. > + * > + * TODO: Should mali_c55_swap_next_config() be async? Isn't it in this version of the series, at least when using DMA ? As I wrote in the review of 07/18, I think the reconfiguration probably needs more careful consideration. > + */ > + mali_c55_stats_fill_buffer(mali_c55, > + next_config ? MALI_C55_CONFIG_PING : > + MALI_C55_CONFIG_PONG); > + mali_c55_swap_next_config(mali_c55, next_config); > > break; > case MALI_C55_IRQ_ISP_DONE:
diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c index eedc8f450184..ed0db34767a4 100644 --- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c +++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c @@ -567,15 +567,9 @@ static int mali_c55_check_hwcfg(struct mali_c55 *mali_c55) return 0; } -static void mali_c55_swap_next_config(struct mali_c55 *mali_c55) +static void mali_c55_swap_next_config(struct mali_c55 *mali_c55, u32 next_config) { struct mali_c55_context *ctx = mali_c55_get_active_context(mali_c55); - u32 curr_config, next_config; - - curr_config = mali_c55_read(mali_c55, MALI_C55_REG_PING_PONG_READ); - curr_config = (curr_config & MALI_C55_REG_PING_PONG_READ_MASK) - >> (ffs(MALI_C55_REG_PING_PONG_READ_MASK) - 1); - next_config = curr_config ^ 1; mali_c55_update_bits(mali_c55, MALI_C55_REG_MCU_CONFIG, MALI_C55_REG_MCU_CONFIG_WRITE_MASK, @@ -588,6 +582,7 @@ static irqreturn_t mali_c55_isr(int irq, void *context) { struct device *dev = context; struct mali_c55 *mali_c55 = dev_get_drvdata(dev); + u32 curr_config, next_config; u32 interrupt_status; unsigned int i, j; @@ -612,7 +607,30 @@ static irqreturn_t mali_c55_isr(int irq, void *context) for (j = i; j < MALI_C55_NUM_CAP_DEVS; j++) mali_c55_set_next_buffer(&mali_c55->cap_devs[j]); - mali_c55_swap_next_config(mali_c55); + /* + * When the ISP starts a frame we have some work to do: + * + * 1. Copy over the config for the **next** frame + * 2. Read out the metering stats for the **last** frame + */ + + curr_config = mali_c55_read(mali_c55, + MALI_C55_REG_PING_PONG_READ); + curr_config &= MALI_C55_REG_PING_PONG_READ_MASK; + curr_config >>= ffs(MALI_C55_REG_PING_PONG_READ_MASK) - 1; + next_config = curr_config ^ 1; + + /* + * The ordering of these two is currently important as + * mali_c55_stats_fill_buffer() is asynchronous whereas + * mali_c55_swap_next_config() is not. + * + * TODO: Should mali_c55_swap_next_config() be async? + */ + mali_c55_stats_fill_buffer(mali_c55, + next_config ? MALI_C55_CONFIG_PING : + MALI_C55_CONFIG_PONG); + mali_c55_swap_next_config(mali_c55, next_config); break; case MALI_C55_IRQ_ISP_DONE: