diff mbox series

[v4,04/12] PCI: brcmstb: Use bridge reset if available

Message ID 20240716213131.6036-5-james.quinlan@broadcom.com (mailing list archive)
State New, archived
Headers show
Series PCI: brcnstb: Enable STB 7712 SOC | expand

Commit Message

Jim Quinlan July 16, 2024, 9:31 p.m. UTC
The 7712 SOC has a bridge reset which can be described in the device tree.
If it is present, use it. Otherwise, continue to use the legacy method to
reset the bridge.

Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

Comments

Manivannan Sadhasivam July 25, 2024, 4:37 a.m. UTC | #1
On Tue, Jul 16, 2024 at 05:31:19PM -0400, Jim Quinlan wrote:
> The 7712 SOC has a bridge reset which can be described in the device tree.
> If it is present, use it. Otherwise, continue to use the legacy method to
> reset the bridge.
> 
> Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
> Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
> ---
>  drivers/pci/controller/pcie-brcmstb.c | 22 +++++++++++++++++-----
>  1 file changed, 17 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index c257434edc08..92816d8d215a 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -265,6 +265,7 @@ struct brcm_pcie {
>  	enum pcie_type		type;
>  	struct reset_control	*rescal;
>  	struct reset_control	*perst_reset;
> +	struct reset_control	*bridge;

'bridge' is an opaque name. Use something like 'bridge_reset'.

>  	int			num_memc;
>  	u64			memc_size[PCIE_BRCM_MAX_MEMC];
>  	u32			hw_rev;
> @@ -732,12 +733,19 @@ static void __iomem *brcm7425_pcie_map_bus(struct pci_bus *bus,
>  
>  static void brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie, u32 val)
>  {
> -	u32 tmp, mask =  RGR1_SW_INIT_1_INIT_GENERIC_MASK;
> -	u32 shift = RGR1_SW_INIT_1_INIT_GENERIC_SHIFT;
> +	if (pcie->bridge) {
> +		if (val)
> +			reset_control_assert(pcie->bridge);
> +		else
> +			reset_control_deassert(pcie->bridge);

Well, these APIs will bail out if the reset_control pointer is NULL. So you can
just call them directly instead of if..else condition.

- Mani
diff mbox series

Patch

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index c257434edc08..92816d8d215a 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -265,6 +265,7 @@  struct brcm_pcie {
 	enum pcie_type		type;
 	struct reset_control	*rescal;
 	struct reset_control	*perst_reset;
+	struct reset_control	*bridge;
 	int			num_memc;
 	u64			memc_size[PCIE_BRCM_MAX_MEMC];
 	u32			hw_rev;
@@ -732,12 +733,19 @@  static void __iomem *brcm7425_pcie_map_bus(struct pci_bus *bus,
 
 static void brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie, u32 val)
 {
-	u32 tmp, mask =  RGR1_SW_INIT_1_INIT_GENERIC_MASK;
-	u32 shift = RGR1_SW_INIT_1_INIT_GENERIC_SHIFT;
+	if (pcie->bridge) {
+		if (val)
+			reset_control_assert(pcie->bridge);
+		else
+			reset_control_deassert(pcie->bridge);
+	} else {
+		u32 tmp, mask =  RGR1_SW_INIT_1_INIT_GENERIC_MASK;
+		u32 shift = RGR1_SW_INIT_1_INIT_GENERIC_SHIFT;
 
-	tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
-	tmp = (tmp & ~mask) | ((val << shift) & mask);
-	writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
+		tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
+		tmp = (tmp & ~mask) | ((val << shift) & mask);
+		writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
+	}
 }
 
 static void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32 val)
@@ -1621,6 +1629,10 @@  static int brcm_pcie_probe(struct platform_device *pdev)
 	if (IS_ERR(pcie->perst_reset))
 		return PTR_ERR(pcie->perst_reset);
 
+	pcie->bridge = devm_reset_control_get_optional_exclusive(&pdev->dev, "bridge");
+	if (IS_ERR(pcie->bridge))
+		return PTR_ERR(pcie->bridge);
+
 	ret = clk_prepare_enable(pcie->clk);
 	if (ret) {
 		dev_err(&pdev->dev, "could not enable clock\n");