| Message ID | 20240717135027.4116101-1-alexander.stein@ew.tq-group.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] arm64: dts: imx8-ss-dma: add #address-cells and #size-cells to LPI2C nodes | expand |
On Wed, Jul 17, 2024 at 03:50:25PM +0200, Alexander Stein wrote: > These properties are required by i2c-controller.yaml bindings. > Add them on SoC level, rather than on board level. > Reviewed-by: Frank Li <Frank.Li@nxp.com> > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> > --- > arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi > index f7a91d43a0ffe..3f521441faf7e 100644 > --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi > @@ -303,6 +303,8 @@ adma_pwm_lpcg: clock-controller@5a590000 { > > i2c0: i2c@5a800000 { > reg = <0x5a800000 0x4000>; > + #address-cells = <1>; > + #size-cells = <0>; > interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>, > <&i2c0_lpcg IMX_LPCG_CLK_4>; > @@ -315,6 +317,8 @@ i2c0: i2c@5a800000 { > > i2c1: i2c@5a810000 { > reg = <0x5a810000 0x4000>; > + #address-cells = <1>; > + #size-cells = <0>; > interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>, > <&i2c1_lpcg IMX_LPCG_CLK_4>; > @@ -327,6 +331,8 @@ i2c1: i2c@5a810000 { > > i2c2: i2c@5a820000 { > reg = <0x5a820000 0x4000>; > + #address-cells = <1>; > + #size-cells = <0>; > interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>, > <&i2c2_lpcg IMX_LPCG_CLK_4>; > @@ -339,6 +345,8 @@ i2c2: i2c@5a820000 { > > i2c3: i2c@5a830000 { > reg = <0x5a830000 0x4000>; > + #address-cells = <1>; > + #size-cells = <0>; > interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>, > <&i2c3_lpcg IMX_LPCG_CLK_4>; > -- > 2.34.1 >
On Wed, Jul 17, 2024 at 03:50:25PM +0200, Alexander Stein wrote: > These properties are required by i2c-controller.yaml bindings. > Add them on SoC level, rather than on board level. > > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Applied both, thanks!
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi index f7a91d43a0ffe..3f521441faf7e 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi @@ -303,6 +303,8 @@ adma_pwm_lpcg: clock-controller@5a590000 { i2c0: i2c@5a800000 { reg = <0x5a800000 0x4000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>, <&i2c0_lpcg IMX_LPCG_CLK_4>; @@ -315,6 +317,8 @@ i2c0: i2c@5a800000 { i2c1: i2c@5a810000 { reg = <0x5a810000 0x4000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>, <&i2c1_lpcg IMX_LPCG_CLK_4>; @@ -327,6 +331,8 @@ i2c1: i2c@5a810000 { i2c2: i2c@5a820000 { reg = <0x5a820000 0x4000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>, <&i2c2_lpcg IMX_LPCG_CLK_4>; @@ -339,6 +345,8 @@ i2c2: i2c@5a820000 { i2c3: i2c@5a830000 { reg = <0x5a830000 0x4000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>, <&i2c3_lpcg IMX_LPCG_CLK_4>;
These properties are required by i2c-controller.yaml bindings. Add them on SoC level, rather than on board level. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> --- arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)