| Message ID | 20240803105702.9621-6-hpausten@protonmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | clk: clocking-wizard: add user clock monitor support | expand |
On 03/08/2024 12:58, Harry Austen wrote: > This Xilinx clocking wizard IP core outputs this interrupt signal to > indicate when one of the four optional user clock inputs is either > stopped, overruns, underruns or glitches. > > This functionality was only added from version 6.0 onwards, so restrict > it to particular compatible strings. > > Signed-off-by: Harry Austen <hpausten@protonmail.com> > --- > v1 -> v2: Fix binding errors by moving interrupts up front, restrict later > > .../bindings/clock/xlnx,clocking-wizard.yaml | 25 ++++++++++++++++++- > 1 file changed, 24 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml > index 9d5324dc1027a..9e5078cef2962 100644 > --- a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml > +++ b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml > @@ -39,6 +39,14 @@ properties: > - const: clk_in1 > - const: s_axi_aclk > > + interrupts: > + items: > + - description: user clock monitor interrupt > + > + interrupt-names: > + items: > + - const: monitor > + > Why multiple blank lines? Only one. > xlnx,speed-grade: > $ref: /schemas/types.yaml#/definitions/uint32 > @@ -62,17 +70,32 @@ required: > - xlnx,speed-grade > - xlnx,nr-outputs With above fixed: Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Sun Aug 4, 2024 at 10:04 AM BST, Krzysztof Kozlowski wrote: > On 03/08/2024 12:58, Harry Austen wrote: > > This Xilinx clocking wizard IP core outputs this interrupt signal to > > indicate when one of the four optional user clock inputs is either > > stopped, overruns, underruns or glitches. > > > > This functionality was only added from version 6.0 onwards, so restrict > > it to particular compatible strings. > > > > Signed-off-by: Harry Austen <hpausten@protonmail.com> > > --- > > v1 -> v2: Fix binding errors by moving interrupts up front, restrict later > > > > .../bindings/clock/xlnx,clocking-wizard.yaml | 25 ++++++++++++++++++- > > 1 file changed, 24 insertions(+), 1 deletion(-) > > > > diff --git a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml > > index 9d5324dc1027a..9e5078cef2962 100644 > > --- a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml > > +++ b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml > > @@ -39,6 +39,14 @@ properties: > > - const: clk_in1 > > - const: s_axi_aclk > > > > + interrupts: > > + items: > > + - description: user clock monitor interrupt > > + > > + interrupt-names: > > + items: > > + - const: monitor > > + > > > > Why multiple blank lines? Only one. There were two blank lines here previously. I assumed it may have been to separate out the vendor specific properties. Will remove in v3. > > > xlnx,speed-grade: > > $ref: /schemas/types.yaml#/definitions/uint32 > > @@ -62,17 +70,32 @@ required: > > - xlnx,speed-grade > > - xlnx,nr-outputs > > With above fixed: > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Thanks! > > Best regards, > Krzysztof
diff --git a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml index 9d5324dc1027a..9e5078cef2962 100644 --- a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml +++ b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml @@ -39,6 +39,14 @@ properties: - const: clk_in1 - const: s_axi_aclk + interrupts: + items: + - description: user clock monitor interrupt + + interrupt-names: + items: + - const: monitor + xlnx,speed-grade: $ref: /schemas/types.yaml#/definitions/uint32 @@ -62,17 +70,32 @@ required: - xlnx,speed-grade - xlnx,nr-outputs +allOf: + - if: + properties: + compatible: + enum: + - xlnx,clocking-wizard + - xlnx,clocking-wizard-v5.2 + then: + properties: + interrupts: false + interrupt-names: false + additionalProperties: false examples: - | + #include <dt-bindings/interrupt-controller/irq.h> clock-controller@b0000000 { - compatible = "xlnx,clocking-wizard"; + compatible = "xlnx,clocking-wizard-v6.0"; reg = <0xb0000000 0x10000>; #clock-cells = <1>; xlnx,speed-grade = <1>; xlnx,nr-outputs = <6>; clock-names = "clk_in1", "s_axi_aclk"; clocks = <&clkc 15>, <&clkc 15>; + interrupts-extended = <&intc 52 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "monitor"; }; ...
This Xilinx clocking wizard IP core outputs this interrupt signal to indicate when one of the four optional user clock inputs is either stopped, overruns, underruns or glitches. This functionality was only added from version 6.0 onwards, so restrict it to particular compatible strings. Signed-off-by: Harry Austen <hpausten@protonmail.com> --- v1 -> v2: Fix binding errors by moving interrupts up front, restrict later .../bindings/clock/xlnx,clocking-wizard.yaml | 25 ++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-)