| Message ID | 20240814104151.2038457-3-b-padhi@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Reserve Timer Nodes to avoid clash with Remoteproc | expand |
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 8230d53cd696..d7969122afd8 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -974,3 +974,32 @@ &main_mcan2 { pinctrl-0 = <&main_mcan2_pins_default>; phys = <&transceiver4>; }; + +/* Timers are used by Remoteproc firmware */ +&main_timer0 { + status = "reserved"; +}; + +&main_timer1 { + status = "reserved"; +}; + +&main_timer2 { + status = "reserved"; +}; + +&main_timer12 { + status = "reserved"; +}; + +&main_timer13 { + status = "reserved"; +}; + +&main_timer14 { + status = "reserved"; +}; + +&main_timer15 { + status = "reserved"; +};
The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain use timers. Therefore, change the status of the timer nodes to "reserved" to avoid any clash. Usage is described as below: +===================+==============+ | Remoteproc node | Timer Node | +===================+==============+ | main_r5fss0_core0 | main_timer12 | +-------------------+--------------+ | main_r5fss0_core1 | main_timer13 | +-------------------+--------------+ | main_r5fss1_core0 | main_timer14 | +-------------------+--------------+ | main_r5fss1_core1 | main_timer15 | +-------------------+--------------+ | c66_0 | main_timer0 | +-------------------+--------------+ | c66_1 | main_timer1 | +-------------------+--------------+ | c71_0 | main_timer2 | +-------------------+--------------+ This change is already incorporated for timer nodes in the MCU voltage domain. Fixes: 7f209dd1267c ("arm64: dts: ti: k3-j721e: Add general purpose timers") Signed-off-by: Beleswar Padhi <b-padhi@ti.com> --- .../dts/ti/k3-j721e-common-proc-board.dts | 29 +++++++++++++++++++ 1 file changed, 29 insertions(+)