| Message ID | 20240814104151.2038457-6-b-padhi@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Reserve Timer Nodes to avoid clash with Remoteproc | expand |
On 8/14/2024 4:11 PM, Beleswar Padhi wrote: > The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain > use timers. Therefore, change the status of the timer nodes to > "reserved" to avoid any clash. Usage is described as below: > > +===================+=============+ > | Remoteproc Node | Timer Node | > +===================+=============+ > | main_r5fss0_core0 | main_timer0 | > +-------------------+-------------+ > | c7x_0 | main_timer1 | > +-------------------+-------------+ > | c7x_1 | main_timer2 | > +-------------------+-------------+ > > This change is already incorporated for timer nodes in the MCU voltage > domain. > > Fixes: 3308a31c507c ("arm64: dts: ti: k3-am62: Add general purpose timers for am62") Please check Fixes tag once. AFAIR, J722S uses am62p not am62 > Signed-off-by: Beleswar Padhi <b-padhi@ti.com> > --- > arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts > index dd3b5f7039d7..e03beb0b5aad 100644 > --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts > +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts > @@ -566,3 +566,16 @@ &mcasp1 { > 0 0 0 0 > >; > }; > + > +/* Timers are used by Remoteproc firmware */ > +&main_timer0 { > + status = "reserved"; > +}; > + > +&main_timer1 { > + status = "reserved"; > +}; > + > +&main_timer2 { > + status = "reserved"; > +};
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts index dd3b5f7039d7..e03beb0b5aad 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts @@ -566,3 +566,16 @@ &mcasp1 { 0 0 0 0 >; }; + +/* Timers are used by Remoteproc firmware */ +&main_timer0 { + status = "reserved"; +}; + +&main_timer1 { + status = "reserved"; +}; + +&main_timer2 { + status = "reserved"; +};
The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain use timers. Therefore, change the status of the timer nodes to "reserved" to avoid any clash. Usage is described as below: +===================+=============+ | Remoteproc Node | Timer Node | +===================+=============+ | main_r5fss0_core0 | main_timer0 | +-------------------+-------------+ | c7x_0 | main_timer1 | +-------------------+-------------+ | c7x_1 | main_timer2 | +-------------------+-------------+ This change is already incorporated for timer nodes in the MCU voltage domain. Fixes: 3308a31c507c ("arm64: dts: ti: k3-am62: Add general purpose timers for am62") Signed-off-by: Beleswar Padhi <b-padhi@ti.com> --- arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+)