From patchwork Wed Aug 14 12:26:32 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andrei Simion X-Patchwork-Id: 13763440 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id E35A2C52D7B for ; Wed, 14 Aug 2024 12:32:47 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Type: Content-Transfer-Encoding:MIME-Version:References:In-Reply-To:Message-ID:Date :Subject:CC:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=n2GRtxZ0Xzq2E8CNhWJrEsnY3w76JSKsGWb4qeMdQmw=; b=TOHCJafKmtokiOtKD/INZnpPP9 VJnvuR1+Bq6l4PuwpeXnQgIUiEVOuvYHNZHYlR9+eSZlNJS8e5sa/OdaeforNuLp4y8jPwBl27Gio gb7B9DPBx6LFwLiYy/pijTORSRb8NMqYAw/3bn8mZJuj2HFtm5qhmSjrqg40z1GnHXitVmyMGOa9N jDucf0/NsWPooFHsjlICQIqLUYQgza9d17jVNFggoX+5KkigrVzESDt2FTy4X1foWVSr+lsuKJTIi DenNwZ9LwzAvfh7Ag9ncZo+386zvG7ahpcrCS4bv2bLFU7bgzITpTtaUKRUcWD1tEGHsaP5ZmPIBo 2B3MKnTg==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.97.1 #2 (Red Hat Linux)) id 1seDB0-00000006wZf-3AqB; Wed, 14 Aug 2024 12:32:30 +0000 Received: from esa.microchip.iphmx.com ([68.232.153.233]) by bombadil.infradead.org with esmtps (Exim 4.97.1 #2 (Red Hat Linux)) id 1seD7f-00000006vc1-0NVV for linux-arm-kernel@lists.infradead.org; Wed, 14 Aug 2024 12:29:07 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1723638543; x=1755174543; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=wGBNrZAgSwNLFlDxMURocSgxExuuUV8DBTJJByC1j2Q=; b=Who03JuokzxydJJoOYE4BOWdsrQRYqKkYEBmDDyy0fB9fB++b4eMZ3Wf ar0j3wkK5L0Y/p+ZzwLlvW+PuBxa8tnsw7AE0dZB/Kdzv+0kiKyaJ9q4N oE4EtFRSVqEntDLR4pQdqH/CJF9MsDcwEMbgw+uiIH+G9AQv7a/NuEkko B9mcMjyztXslYgikkZ+II+1GZ2baciaeRHpTB6Zkcft4makZVFwpqR2bz NTVl5QehvKKSus4AeSSHVUzaLGIRqRatL+iomz5hz9SGvHr0+Nj90IWo4 lGMA8WwhTi2m7GAq9tMrOhrBXwIQlNxk1SRTwVY1MJIkdlvp0ShXUkZnu Q==; X-CSE-ConnectionGUID: 4X+cfYNUS7iIAk4JdwvsDg== X-CSE-MsgGUID: EOo2/jyrQaGxbdzSPD7gBg== X-IronPort-AV: E=Sophos;i="6.10,145,1719903600"; d="scan'208";a="30486705" X-Amp-Result: SKIPPED(no attachment in message) Received: from unknown (HELO email.microchip.com) ([170.129.1.10]) by esa3.microchip.iphmx.com with ESMTP/TLS/ECDHE-RSA-AES128-GCM-SHA256; 14 Aug 2024 05:29:02 -0700 Received: from chn-vm-ex01.mchp-main.com (10.10.85.143) by chn-vm-ex01.mchp-main.com (10.10.85.143) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.35; Wed, 14 Aug 2024 05:28:50 -0700 Received: from ROB-ULT-M76677.microchip.com (10.10.85.11) by chn-vm-ex01.mchp-main.com (10.10.85.143) with Microsoft SMTP Server id 15.1.2507.35 via Frontend Transport; Wed, 14 Aug 2024 05:28:47 -0700 From: Andrei Simion To: , , , , , , CC: , , , , Andrei Simion Subject: [PATCH 4/5] ARM: dts: microchip: Rename the usb node Date: Wed, 14 Aug 2024 15:26:32 +0300 Message-ID: <20240814122633.198562-5-andrei.simion@microchip.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20240814122633.198562-1-andrei.simion@microchip.com> References: <20240814122633.198562-1-andrei.simion@microchip.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20240814_052903_404719_9C094BB0 X-CRM114-Status: GOOD ( 12.49 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Rename the usb node according to devicetree specification and update the label according with the node-specific standard as: ohci, ehci or gadget. Signed-off-by: Andrei Simion --- Split the bloated patch into small patches on topics based on comments: https://lore.kernel.org/linux-arm-kernel/89f51615-0dee-4ab0-ab72-e3c057fee1e7@tuxon.dev/ --- arch/arm/boot/dts/microchip/aks-cdu.dts | 4 ++-- arch/arm/boot/dts/microchip/animeo_ip.dts | 2 +- arch/arm/boot/dts/microchip/at91-ariag25.dts | 4 ++-- arch/arm/boot/dts/microchip/at91-ariettag25.dts | 6 +++--- arch/arm/boot/dts/microchip/at91-cosino_mega2560.dts | 6 +++--- arch/arm/boot/dts/microchip/at91-dvk_som60.dts | 6 +++--- arch/arm/boot/dts/microchip/at91-dvk_su60_somc.dtsi | 6 +++--- arch/arm/boot/dts/microchip/at91-foxg20.dts | 4 ++-- arch/arm/boot/dts/microchip/at91-gatwick.dts | 4 ++-- arch/arm/boot/dts/microchip/at91-kizbox.dts | 2 +- arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi | 4 ++-- arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts | 6 +++--- arch/arm/boot/dts/microchip/at91-kizboxmini-common.dtsi | 4 ++-- arch/arm/boot/dts/microchip/at91-kizboxmini-mb.dts | 2 +- arch/arm/boot/dts/microchip/at91-lmu5000.dts | 4 ++-- arch/arm/boot/dts/microchip/at91-nattis-2-natte-2.dts | 2 +- arch/arm/boot/dts/microchip/at91-q5xr5.dts | 4 ++-- arch/arm/boot/dts/microchip/at91-qil_a9260.dts | 4 ++-- arch/arm/boot/dts/microchip/at91-sam9_l9260.dts | 2 +- arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts | 6 +++--- arch/arm/boot/dts/microchip/at91-sam9x60ek.dts | 6 +++--- arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts | 6 +++--- arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts | 6 +++--- arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts | 6 +++--- arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts | 6 +++--- arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts | 6 +++--- arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts | 6 +++--- arch/arm/boot/dts/microchip/at91-sama5d3_eds.dts | 6 +++--- arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts | 2 +- arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts | 6 +++--- arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts | 6 +++--- arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts | 6 +++--- arch/arm/boot/dts/microchip/at91-sama5d4ek.dts | 6 +++--- arch/arm/boot/dts/microchip/at91-som60.dtsi | 4 ++-- arch/arm/boot/dts/microchip/at91-tse850-3.dts | 6 +++--- arch/arm/boot/dts/microchip/at91-vinco.dts | 6 +++--- arch/arm/boot/dts/microchip/at91-wb45n.dts | 2 +- arch/arm/boot/dts/microchip/at91-wb45n.dtsi | 4 ++-- arch/arm/boot/dts/microchip/at91-wb50n.dts | 6 +++--- arch/arm/boot/dts/microchip/at91-wb50n.dtsi | 4 ++-- arch/arm/boot/dts/microchip/at91rm9200.dtsi | 4 ++-- arch/arm/boot/dts/microchip/at91rm9200ek.dts | 4 ++-- arch/arm/boot/dts/microchip/at91sam9260.dtsi | 4 ++-- arch/arm/boot/dts/microchip/at91sam9260ek.dts | 4 ++-- arch/arm/boot/dts/microchip/at91sam9261.dtsi | 4 ++-- arch/arm/boot/dts/microchip/at91sam9261ek.dts | 4 ++-- arch/arm/boot/dts/microchip/at91sam9263.dtsi | 4 ++-- arch/arm/boot/dts/microchip/at91sam9263ek.dts | 4 ++-- arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi | 4 ++-- arch/arm/boot/dts/microchip/at91sam9g45.dtsi | 6 +++--- arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts | 6 +++--- arch/arm/boot/dts/microchip/at91sam9n12.dtsi | 4 ++-- arch/arm/boot/dts/microchip/at91sam9n12ek.dts | 4 ++-- arch/arm/boot/dts/microchip/at91sam9rl.dtsi | 2 +- arch/arm/boot/dts/microchip/at91sam9rlek.dts | 2 +- arch/arm/boot/dts/microchip/at91sam9x5.dtsi | 6 +++--- arch/arm/boot/dts/microchip/at91sam9x5ek.dtsi | 6 +++--- arch/arm/boot/dts/microchip/ethernut5.dts | 4 ++-- arch/arm/boot/dts/microchip/evk-pro3.dts | 4 ++-- arch/arm/boot/dts/microchip/mpa1600.dts | 2 +- arch/arm/boot/dts/microchip/pm9g45.dts | 4 ++-- arch/arm/boot/dts/microchip/sam9x60.dtsi | 6 +++--- arch/arm/boot/dts/microchip/sama5d2.dtsi | 6 +++--- arch/arm/boot/dts/microchip/sama5d3.dtsi | 6 +++--- arch/arm/boot/dts/microchip/sama5d3xmb.dtsi | 6 +++--- arch/arm/boot/dts/microchip/sama5d3xmb_cmp.dtsi | 2 +- arch/arm/boot/dts/microchip/sama5d4.dtsi | 6 +++--- arch/arm/boot/dts/microchip/tny_a9263.dts | 2 +- arch/arm/boot/dts/microchip/usb_a9260_common.dtsi | 4 ++-- arch/arm/boot/dts/microchip/usb_a9263.dts | 4 ++-- 70 files changed, 158 insertions(+), 158 deletions(-) diff --git a/arch/arm/boot/dts/microchip/aks-cdu.dts b/arch/arm/boot/dts/microchip/aks-cdu.dts index 742fcf525e1b..52e166c8a365 100644 --- a/arch/arm/boot/dts/microchip/aks-cdu.dts +++ b/arch/arm/boot/dts/microchip/aks-cdu.dts @@ -50,13 +50,13 @@ macb0: ethernet@fffc4000 { status = "okay"; }; - usb1: gadget@fffa4000 { + gadget: usb@fffa4000 { atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; - usb0: ohci@500000 { + ohci: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/animeo_ip.dts b/arch/arm/boot/dts/microchip/animeo_ip.dts index 29936bfbeeb7..911c8d9ee013 100644 --- a/arch/arm/boot/dts/microchip/animeo_ip.dts +++ b/arch/arm/boot/dts/microchip/animeo_ip.dts @@ -136,7 +136,7 @@ ubi@60000 { }; }; - usb0: ohci@500000 { + ohci: usb@500000 { num-ports = <2>; atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/microchip/at91-ariag25.dts b/arch/arm/boot/dts/microchip/at91-ariag25.dts index 713d18f80356..fedcf30a924e 100644 --- a/arch/arm/boot/dts/microchip/at91-ariag25.dts +++ b/arch/arm/boot/dts/microchip/at91-ariag25.dts @@ -173,11 +173,11 @@ &usart3 { status = "okay"; }; -&usb0 { +&ohci { status = "okay"; num-ports = <3>; }; -&usb1 { +&ehci { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-ariettag25.dts b/arch/arm/boot/dts/microchip/at91-ariettag25.dts index 2c52a71752c2..04a001d5c236 100644 --- a/arch/arm/boot/dts/microchip/at91-ariettag25.dts +++ b/arch/arm/boot/dts/microchip/at91-ariettag25.dts @@ -73,15 +73,15 @@ timer@1 { }; }; -&usb0 { +&ohci { num-ports = <3>; status = "okay"; }; -&usb1 { +&ehci { status = "okay"; }; -&usb2 { +&gadget { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-cosino_mega2560.dts b/arch/arm/boot/dts/microchip/at91-cosino_mega2560.dts index 1279dfb38300..0e11fa5ba36c 100644 --- a/arch/arm/boot/dts/microchip/at91-cosino_mega2560.dts +++ b/arch/arm/boot/dts/microchip/at91-cosino_mega2560.dts @@ -56,7 +56,7 @@ &usart2 { status = "okay"; }; -&usb0 { +&ohci { num-ports = <3>; atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */ &pioD 19 GPIO_ACTIVE_LOW @@ -65,11 +65,11 @@ &pioD 20 GPIO_ACTIVE_LOW status = "okay"; }; -&usb1 { +&ehci { status = "okay"; }; -&usb2 { +&gadget { atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-dvk_som60.dts b/arch/arm/boot/dts/microchip/at91-dvk_som60.dts index ededd5b0d27b..cfb8b6586eb5 100644 --- a/arch/arm/boot/dts/microchip/at91-dvk_som60.dts +++ b/arch/arm/boot/dts/microchip/at91-dvk_som60.dts @@ -81,15 +81,15 @@ &macb1 { status = "okay"; }; -&usb0 { +&gadget { status = "okay"; }; -&usb1 { +&ohci { status = "okay"; }; -&usb2 { +&ehci { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/microchip/at91-dvk_su60_somc.dtsi index 3542ad8a243e..32c9c37a4a5c 100644 --- a/arch/arm/boot/dts/microchip/at91-dvk_su60_somc.dtsi +++ b/arch/arm/boot/dts/microchip/at91-dvk_su60_somc.dtsi @@ -145,15 +145,15 @@ ethernet-phy@1 { }; }; -&usb0 { +&gadget{ status = "okay"; }; -&usb1 { +&ohci { status = "okay"; }; -&usb2 { +&ehci { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-foxg20.dts b/arch/arm/boot/dts/microchip/at91-foxg20.dts index 9dfd5de808d1..506703cd9691 100644 --- a/arch/arm/boot/dts/microchip/at91-foxg20.dts +++ b/arch/arm/boot/dts/microchip/at91-foxg20.dts @@ -45,7 +45,7 @@ timer@2 { }; }; - usb1: gadget@fffa4000 { + gadget: usb@fffa4000 { atmel,vbus-gpio = <&pioC 6 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -131,7 +131,7 @@ watchdog@fffffd40 { }; }; - usb0: ohci@500000 { + ohci: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-gatwick.dts b/arch/arm/boot/dts/microchip/at91-gatwick.dts index 551300fd7746..f036c6a5821b 100644 --- a/arch/arm/boot/dts/microchip/at91-gatwick.dts +++ b/arch/arm/boot/dts/microchip/at91-gatwick.dts @@ -111,11 +111,11 @@ spidev@0 { }; }; -&usb1 { +&ohci { status = "okay"; /delete-property/atmel,oc-gpio; }; -&usb2 { +&ehci { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-kizbox.dts b/arch/arm/boot/dts/microchip/at91-kizbox.dts index 307663b4eec2..984ff0db4d8e 100644 --- a/arch/arm/boot/dts/microchip/at91-kizbox.dts +++ b/arch/arm/boot/dts/microchip/at91-kizbox.dts @@ -175,7 +175,7 @@ &watchdog { status = "okay"; }; -&usb0 { +&ohci { num-ports = <1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi index a44d92305dbb..6ccf4b94abe3 100644 --- a/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi +++ b/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi @@ -223,11 +223,11 @@ ubi@20000 { }; }; -&usb1 { +&ohci { status = "okay"; }; -&usb2 { +&ehci { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts b/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts index fec7269088d1..fa0a0d884111 100644 --- a/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts +++ b/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts @@ -296,14 +296,14 @@ i2c6: i2c@600 { }; }; -&usb0 { +&gadget { status = "okay"; }; -&usb1 { +&ohci { status = "okay"; }; -&usb2 { +&ehci { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/microchip/at91-kizboxmini-common.dtsi index 42640fe6b6d0..ebf92ba1d66c 100644 --- a/arch/arm/boot/dts/microchip/at91-kizboxmini-common.dtsi +++ b/arch/arm/boot/dts/microchip/at91-kizboxmini-common.dtsi @@ -157,12 +157,12 @@ ubi@20000 { }; }; -&usb0 { +&ohci { num-ports = <1>; status = "okay"; }; -&usb1 { +&ehci { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-kizboxmini-mb.dts b/arch/arm/boot/dts/microchip/at91-kizboxmini-mb.dts index c07d3076a9bc..914261d31a2a 100644 --- a/arch/arm/boot/dts/microchip/at91-kizboxmini-mb.dts +++ b/arch/arm/boot/dts/microchip/at91-kizboxmini-mb.dts @@ -13,7 +13,7 @@ / { "atmel,at91sam9x5", "atmel,at91sam9"; }; -&usb0 { +&ohci { num-ports = <2>; }; diff --git a/arch/arm/boot/dts/microchip/at91-lmu5000.dts b/arch/arm/boot/dts/microchip/at91-lmu5000.dts index f8863d7c0798..04a743cb646d 100644 --- a/arch/arm/boot/dts/microchip/at91-lmu5000.dts +++ b/arch/arm/boot/dts/microchip/at91-lmu5000.dts @@ -130,12 +130,12 @@ &usart2 { status = "okay"; }; -&usb0 { +&ohci { num-ports = <2>; status = "okay"; }; -&usb1 { +&gadget { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1_vbus_gpio>; atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/microchip/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/microchip/at91-nattis-2-natte-2.dts index f71377c9b757..b6767f8a8285 100644 --- a/arch/arm/boot/dts/microchip/at91-nattis-2-natte-2.dts +++ b/arch/arm/boot/dts/microchip/at91-nattis-2-natte-2.dts @@ -297,7 +297,7 @@ &dbgu { atmel,use-dma-rx; }; -&usb0 { +&gadget { status = "okay"; atmel,vbus-gpio = <&pioD 28 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/microchip/at91-q5xr5.dts b/arch/arm/boot/dts/microchip/at91-q5xr5.dts index 9cf60b6f695c..8d91810b2b42 100644 --- a/arch/arm/boot/dts/microchip/at91-q5xr5.dts +++ b/arch/arm/boot/dts/microchip/at91-q5xr5.dts @@ -167,12 +167,12 @@ &pinctrl_usart0_dcd status = "okay"; }; -&usb0 { +&ohci { num-ports = <2>; status = "okay"; }; -&usb1 { +&gadget { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-qil_a9260.dts b/arch/arm/boot/dts/microchip/at91-qil_a9260.dts index 5ccb3c139592..51451cd24f26 100644 --- a/arch/arm/boot/dts/microchip/at91-qil_a9260.dts +++ b/arch/arm/boot/dts/microchip/at91-qil_a9260.dts @@ -42,7 +42,7 @@ timer@2 { }; }; - usb1: gadget@fffa4000 { + gadget: usb@fffa4000 { atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -114,7 +114,7 @@ shdwc: poweroff@fffffd10 { }; }; - usb0: ohci@500000 { + ohci: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts b/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts index 2fb51b9aca2a..907c4ff1334b 100644 --- a/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts +++ b/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts @@ -105,7 +105,7 @@ nand0: nand@40000000 { status = "okay"; }; - usb0: ohci@500000 { + ohci: usb@500000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts index b9ffd9e5faac..74de7777d08b 100644 --- a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts +++ b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts @@ -482,14 +482,14 @@ timer1: timer@1 { }; }; -&usb0 { +&gadget { atmel,vbus-gpio = <&pioA 27 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; -&usb1 { +&ohci { num-ports = <3>; atmel,vbus-gpio = <0 &pioD 18 GPIO_ACTIVE_HIGH @@ -499,7 +499,7 @@ &pioD 18 GPIO_ACTIVE_HIGH status = "okay"; }; -&usb2 { +&ehci { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts index 3b38707d736e..b9a21f9f9a6d 100644 --- a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts @@ -641,14 +641,14 @@ timer1: timer@1 { }; }; -&usb0 { +&gadget { atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; -&usb1 { +&ohci { num-ports = <3>; atmel,vbus-gpio = <0 &pioD 15 GPIO_ACTIVE_HIGH @@ -658,7 +658,7 @@ &pioD 15 GPIO_ACTIVE_HIGH status = "okay"; }; -&usb2 { +&ehci { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts index eab7efe2d5a3..8a9207cb8e08 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts @@ -30,14 +30,14 @@ chosen { }; ahb { - usb0: gadget@300000 { + gadget: usb@300000 { atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@400000 { + ohci: usb@400000 { num-ports = <3>; atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */ &pioA PIN_PA27 GPIO_ACTIVE_HIGH @@ -48,7 +48,7 @@ &pioA PIN_PA27 GPIO_ACTIVE_HIGH status = "okay"; }; - usb2: ehci@500000 { + ehci: usb@500000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts index 15239834d886..bd09d21ec4d2 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts @@ -239,14 +239,14 @@ &uart3 { status = "okay"; }; -&usb0 { +&gadget { atmel,vbus-gpio = <&pioA PIN_PA16 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; -&usb1 { +&ohci { num-ports = <3>; atmel,vbus-gpio = <0 &pioA PIN_PA10 GPIO_ACTIVE_HIGH @@ -257,7 +257,7 @@ &pioA PIN_PA10 GPIO_ACTIVE_HIGH status = "okay"; }; -&usb2 { +&ehci { phy_type = "hsic"; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts index 412cc65472ff..66eef92d7f7a 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts @@ -574,14 +574,14 @@ &uart4 { status = "okay"; }; -&usb0 { +&gadget { atmel,vbus-gpio = <&pioA PIN_PB13 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; -&usb1 { +&ohci { num-ports = <3>; atmel,vbus-gpio = <0 &pioA PIN_PA6 GPIO_ACTIVE_HIGH @@ -591,7 +591,7 @@ &pioA PIN_PA6 GPIO_ACTIVE_HIGH status = "okay"; }; -&usb2 { +&ehci { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts index e4648682c994..50186626fd3b 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts @@ -766,21 +766,21 @@ &uart3 { status = "okay"; }; -&usb0 { +&gadget { atmel,vbus-gpio = <&pioA PIN_PD23 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; -&usb1 { +&ohci { num-ports = <3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb_default>; status = "okay"; }; -&usb2 { +&ehci { phy_type = "hsic"; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts index e4ae60ef5f8a..117d049191a5 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts @@ -40,14 +40,14 @@ main_xtal { }; ahb { - usb0: gadget@300000 { + gadget: usb@300000 { atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@400000 { + ohci: usb@400000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioA PIN_PB12 GPIO_ACTIVE_HIGH @@ -58,7 +58,7 @@ &pioA PIN_PB12 GPIO_ACTIVE_HIGH status = "okay"; }; - usb2: ehci@500000 { + ehci: usb@500000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts index 4bab3f25b855..ae3b7842deb4 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts @@ -39,14 +39,14 @@ main_xtal { }; ahb { - usb0: gadget@300000 { + gadget: usb@300000 { atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@400000 { + ohci: usb@400000 { num-ports = <3>; atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */ &pioA PIN_PB10 GPIO_ACTIVE_HIGH @@ -57,7 +57,7 @@ &pioA PIN_PB10 GPIO_ACTIVE_HIGH status = "okay"; }; - usb2: ehci@500000 { + ehci: usb@500000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_eds.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_eds.dts index c287b03d768b..189f1b3ae24d 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d3_eds.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d3_eds.dts @@ -284,14 +284,14 @@ timer1: timer@1 { }; }; -&usb0 { /* USB Device port with VBUS detection. */ +&gadget {/* USB Device port with VBUS detection. */ atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; -&usb1 { /* 3-port Host. First port is unused. */ +&ohci { /* 3-port Host. First port is unused. */ atmel,vbus-gpio = <0 &pioE 3 GPIO_ACTIVE_HIGH &pioE 4 GPIO_ACTIVE_HIGH @@ -302,6 +302,6 @@ &pioE 4 GPIO_ACTIVE_HIGH status = "okay"; }; -&usb2 { +&ehci { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts index b66570080894..b44d15c9cc19 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts @@ -175,7 +175,7 @@ timer1: timer@1 { }; }; -&usb0 { +&gadget { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts index 5662992cf213..35ece73a1a03 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts @@ -276,14 +276,14 @@ pinctrl_vcc_mmc0_reg_gpio: vcc_mmc0_reg_gpio_default { }; }; - usb0: gadget@500000 { + gadget: usb@500000 { atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@600000 { + ohci: usb@600000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 3 GPIO_ACTIVE_LOW @@ -294,7 +294,7 @@ &pioE 4 GPIO_ACTIVE_LOW status = "okay"; }; - usb2: ehci@700000 { + ehci: usb@700000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts index 8adf567f2f0f..ec7dfb03dce1 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts @@ -15,14 +15,14 @@ chosen { }; ahb { - usb0: gadget@400000 { + gadget: usb@400000 { atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@500000 { + ohci: usb@500000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 11 GPIO_ACTIVE_LOW @@ -31,7 +31,7 @@ &pioE 14 GPIO_ACTIVE_LOW status = "okay"; }; - usb2: ehci@600000 { + ehci: usb@600000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts index 95d701d13fef..ae64182d0264 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts @@ -157,14 +157,14 @@ pinctrl_vcc_mmc1_reg: vcc_mmc1_reg { }; }; - usb0: gadget@400000 { + gadget: usb@400000 { atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@500000 { + ohci: usb@500000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 11 GPIO_ACTIVE_HIGH @@ -175,7 +175,7 @@ &pioE 14 GPIO_ACTIVE_HIGH status = "okay"; }; - usb2: ehci@600000 { + ehci: usb@600000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts index 20ac775059ca..35296dbb7a39 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts @@ -191,14 +191,14 @@ pinctrl_mxt_ts: mxt_irq { }; }; - usb0: gadget@400000 { + gadget: usb@400000 { atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@500000 { + ohci: usb@500000 { num-ports = <3>; atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */ &pioE 11 GPIO_ACTIVE_LOW @@ -207,7 +207,7 @@ &pioE 12 GPIO_ACTIVE_LOW status = "okay"; }; - usb2: ehci@600000 { + ehci: usb@600000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-som60.dtsi b/arch/arm/boot/dts/microchip/at91-som60.dtsi index 39474a112b16..1c649e0e995f 100644 --- a/arch/arm/boot/dts/microchip/at91-som60.dtsi +++ b/arch/arm/boot/dts/microchip/at91-som60.dtsi @@ -211,13 +211,13 @@ ubi@e0000 { }; }; -&usb0 { +&gadget { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; atmel,vbus-gpio = <&pioC 14 GPIO_ACTIVE_HIGH>; }; -&usb1 { +&ohci { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb_vbus &pinctrl_usb_oc>; num-ports = <3>; diff --git a/arch/arm/boot/dts/microchip/at91-tse850-3.dts b/arch/arm/boot/dts/microchip/at91-tse850-3.dts index 9d58a3931207..5bab12604dfa 100644 --- a/arch/arm/boot/dts/microchip/at91-tse850-3.dts +++ b/arch/arm/boot/dts/microchip/at91-tse850-3.dts @@ -275,7 +275,7 @@ phy0: ethernet-phy@3 { }; }; -&usb0 { +&gadget { status = "okay"; pinctrl-names = "default"; @@ -283,7 +283,7 @@ &usb0 { atmel,vbus-gpio = <&pioC 31 GPIO_ACTIVE_HIGH>; }; -&usb1 { +&ohci { status = "okay"; num-ports = <1>; @@ -291,7 +291,7 @@ &usb1 { atmel,oc-gpio = <&pioC 15 GPIO_ACTIVE_LOW>; }; -&usb2 { +&ehci { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-vinco.dts b/arch/arm/boot/dts/microchip/at91-vinco.dts index ecbdacf48708..5e025f3be1b6 100644 --- a/arch/arm/boot/dts/microchip/at91-vinco.dts +++ b/arch/arm/boot/dts/microchip/at91-vinco.dts @@ -155,14 +155,14 @@ pinctrl_usba_vbus: usba_vbus { }; }; - usb0: gadget@400000 { + gadget: usb@400000 { atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "disabled"; }; - usb1: ohci@500000 { + ohci: usb@500000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 11 GPIO_ACTIVE_LOW @@ -171,7 +171,7 @@ &pioE 12 GPIO_ACTIVE_LOW status = "disabled"; }; - usb2: ehci@600000 { + ehci: usb@600000 { /* 4G Modem */ status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-wb45n.dts b/arch/arm/boot/dts/microchip/at91-wb45n.dts index ef73f727f7bd..6b8f02b4aebe 100644 --- a/arch/arm/boot/dts/microchip/at91-wb45n.dts +++ b/arch/arm/boot/dts/microchip/at91-wb45n.dts @@ -28,7 +28,7 @@ &watchdog { status = "okay"; }; -&usb0 { +&ohci { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-wb45n.dtsi b/arch/arm/boot/dts/microchip/at91-wb45n.dtsi index 430c75358086..9299e7fe4990 100644 --- a/arch/arm/boot/dts/microchip/at91-wb45n.dtsi +++ b/arch/arm/boot/dts/microchip/at91-wb45n.dtsi @@ -121,7 +121,7 @@ logs@7fa0000 { }; }; -&usb0 { +&ohci { num-ports = <2>; atmel,vbus-gpio = < &pioB 12 GPIO_ACTIVE_HIGH @@ -138,7 +138,7 @@ &spi0 { cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>; }; -&usb2 { +&gadget { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_board_usb2>; atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/microchip/at91-wb50n.dts b/arch/arm/boot/dts/microchip/at91-wb50n.dts index ec2becf6133b..d5480b9e5342 100644 --- a/arch/arm/boot/dts/microchip/at91-wb50n.dts +++ b/arch/arm/boot/dts/microchip/at91-wb50n.dts @@ -88,15 +88,15 @@ &spi1 { status = "okay"; }; -&usb0 { +&gadget { status = "okay"; }; -&usb1 { +&ohci { status = "okay"; }; -&usb2 { +&ehci { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-wb50n.dtsi b/arch/arm/boot/dts/microchip/at91-wb50n.dtsi index 74b249bb6351..280ef9b98a71 100644 --- a/arch/arm/boot/dts/microchip/at91-wb50n.dtsi +++ b/arch/arm/boot/dts/microchip/at91-wb50n.dtsi @@ -181,13 +181,13 @@ user@6ae0000 { }; }; -&usb0 { +&gadget { atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; }; -&usb1 { +&ohci { num-ports = <3>; atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>; atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/microchip/at91rm9200.dtsi b/arch/arm/boot/dts/microchip/at91rm9200.dtsi index 16c675e3a890..bbb7bdc152be 100644 --- a/arch/arm/boot/dts/microchip/at91rm9200.dtsi +++ b/arch/arm/boot/dts/microchip/at91rm9200.dtsi @@ -662,7 +662,7 @@ usart3: serial@fffcc000 { status = "disabled"; }; - usb1: gadget@fffb0000 { + gadget: usb@fffb0000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfffb0000 0x4000>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>; @@ -702,7 +702,7 @@ &pioB 1 GPIO_ACTIVE_HIGH status = "disabled"; }; - usb0: ohci@300000 { + ohci: usb@300000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00300000 0x100000>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/at91rm9200ek.dts b/arch/arm/boot/dts/microchip/at91rm9200ek.dts index 4624a6f076f8..3089912dd6be 100644 --- a/arch/arm/boot/dts/microchip/at91rm9200ek.dts +++ b/arch/arm/boot/dts/microchip/at91rm9200ek.dts @@ -43,7 +43,7 @@ timer@2 { }; }; - usb1: gadget@fffb0000 { + gadget: usb@fffb0000 { atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>; atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>; status = "okay"; @@ -89,7 +89,7 @@ rtc: rtc@fffffe00 { }; }; - usb0: ohci@300000 { + ohci: usb@300000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9260.dtsi b/arch/arm/boot/dts/microchip/at91sam9260.dtsi index e56d5546554c..1ba88aded4ca 100644 --- a/arch/arm/boot/dts/microchip/at91sam9260.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9260.dtsi @@ -637,7 +637,7 @@ macb0: ethernet@fffc4000 { status = "disabled"; }; - usb1: gadget@fffa4000 { + gadget: usb@fffa4000 { compatible = "atmel,at91sam9260-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; @@ -742,7 +742,7 @@ gpbr: syscon@fffffd50 { }; }; - usb0: ohci@500000 { + ohci: usb@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/at91sam9260ek.dts b/arch/arm/boot/dts/microchip/at91sam9260ek.dts index 6bd60dce8378..ed259e2cb853 100644 --- a/arch/arm/boot/dts/microchip/at91sam9260ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9260ek.dts @@ -45,7 +45,7 @@ timer@2 { }; }; - usb1: gadget@fffa4000 { + gadget: usb@fffa4000 { atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -131,7 +131,7 @@ gpbr: syscon@fffffd50 { }; }; - usb0: ohci@500000 { + ohci: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9261.dtsi b/arch/arm/boot/dts/microchip/at91sam9261.dtsi index 307b60658014..6492f6a88879 100644 --- a/arch/arm/boot/dts/microchip/at91sam9261.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9261.dtsi @@ -77,7 +77,7 @@ ahb { #size-cells = <1>; ranges; - usb0: ohci@500000 { + ohci: usb@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; @@ -142,7 +142,7 @@ tcb0: timer@fffa0000 { clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; - usb1: gadget@fffa4000 { + gadget: usb@fffa4000 { compatible = "atmel,at91sam9261-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/at91sam9261ek.dts b/arch/arm/boot/dts/microchip/at91sam9261ek.dts index 045cb253f23a..4d9269cc5f32 100644 --- a/arch/arm/boot/dts/microchip/at91sam9261ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9261ek.dts @@ -31,7 +31,7 @@ main_xtal { }; ahb { - usb0: ohci@500000 { + ohci: usb@500000 { status = "okay"; }; @@ -136,7 +136,7 @@ timer1: timer@2 { }; }; - usb1: gadget@fffa4000 { + gadget: usb@fffa4000 { atmel,vbus-gpio = <&pioB 29 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9263.dtsi b/arch/arm/boot/dts/microchip/at91sam9263.dtsi index 75d8ff2d12c8..a6c2ba5ce7d4 100644 --- a/arch/arm/boot/dts/microchip/at91sam9263.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9263.dtsi @@ -636,7 +636,7 @@ macb0: ethernet@fffbc000 { status = "disabled"; }; - usb1: gadget@fff78000 { + gadget: usb@fff78000 { compatible = "atmel,at91sam9263-udc"; reg = <0xfff78000 0x4000>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>; @@ -768,7 +768,7 @@ fb0: fb@700000 { status = "disabled"; }; - usb0: ohci@a00000 { + ohci: usb@a00000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/at91sam9263ek.dts b/arch/arm/boot/dts/microchip/at91sam9263ek.dts index ecf4960c88fa..a8ea36db4c04 100644 --- a/arch/arm/boot/dts/microchip/at91sam9263ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9263ek.dts @@ -61,7 +61,7 @@ macb0: ethernet@fffbc000 { status = "okay"; }; - usb1: gadget@fff78000 { + gadget: usb@fff78000 { atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -207,7 +207,7 @@ data@7ca0000 { }; }; - usb0: ohci@a00000 { + ohci: usb@a00000 { num-ports = <2>; status = "okay"; atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi index 4e7cfbbd4241..1ca5227bfae2 100644 --- a/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi @@ -90,7 +90,7 @@ macb0: ethernet@fffc4000 { status = "okay"; }; - usb1: gadget@fffa4000 { + gadget: usb@fffa4000 { pinctrl-0 = <&pinctrl_usb1_vbus_gpio>; pinctrl-names = "default"; atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; @@ -211,7 +211,7 @@ data@7ca0000 { }; }; - usb0: ohci@500000 { + ohci: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9g45.dtsi b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi index 325c63a53118..40a34fe95a19 100644 --- a/arch/arm/boot/dts/microchip/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi @@ -913,7 +913,7 @@ spi1: spi@fffa8000 { status = "disabled"; }; - usb2: gadget@fff78000 { + gadget: usb@fff78000 { compatible = "atmel,at91sam9g45-udc"; reg = <0x00600000 0x80000 0xfff78000 0x400>; @@ -964,7 +964,7 @@ fb0: fb@500000 { status = "disabled"; }; - usb0: ohci@700000 { + ohci: usb@700000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -973,7 +973,7 @@ usb0: ohci@700000 { status = "disabled"; }; - usb1: ehci@800000 { + ehci: usb@800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts b/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts index 071db4f16313..dbcc243dafe8 100644 --- a/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts @@ -174,7 +174,7 @@ flash@0 { }; }; - usb2: gadget@fff78000 { + gadget: usb@fff78000 { atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -303,14 +303,14 @@ data@4000000 { }; }; - usb0: ohci@700000 { + ohci: usb@700000 { status = "okay"; num-ports = <2>; atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW &pioD 3 GPIO_ACTIVE_LOW>; }; - usb1: ehci@800000 { + ehci: usb@800000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9n12.dtsi b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi index 8dc04e9031a6..0ada88b307d2 100644 --- a/arch/arm/boot/dts/microchip/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi @@ -738,7 +738,7 @@ pwm0: pwm@f8034000 { status = "disabled"; }; - usb1: gadget@f803c000 { + gadget: usb@f803c000 { compatible = "atmel,at91sam9260-udc"; reg = <0xf803c000 0x4000>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; @@ -748,7 +748,7 @@ usb1: gadget@f803c000 { }; }; - usb0: ohci@500000 { + ohci: usb@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/at91sam9n12ek.dts b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts index 643c3b2ab97e..734975137ef9 100644 --- a/arch/arm/boot/dts/microchip/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts @@ -142,7 +142,7 @@ hlcdc_panel_output: endpoint@0 { }; }; - usb1: gadget@f803c000 { + gadget: usb@f803c000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1_vbus_sense>; atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; @@ -180,7 +180,7 @@ nand@3 { }; }; - usb0: ohci@500000 { + ohci: usb@500000 { num-ports = <1>; atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/microchip/at91sam9rl.dtsi b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi index 7436b5c862b1..406696600b51 100644 --- a/arch/arm/boot/dts/microchip/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi @@ -282,7 +282,7 @@ adc0: adc@fffd0000 { atmel,adc-startup-time = <40>; }; - usb0: gadget@fffd4000 { + gadget: usb@fffd4000 { compatible = "atmel,at91sam9rl-udc"; reg = <0x00600000 0x100000>, <0xfffd4000 0x4000>; diff --git a/arch/arm/boot/dts/microchip/at91sam9rlek.dts b/arch/arm/boot/dts/microchip/at91sam9rlek.dts index a57351270551..ca6b035c4301 100644 --- a/arch/arm/boot/dts/microchip/at91sam9rlek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9rlek.dts @@ -172,7 +172,7 @@ &pinctrl_adc0_ad5 status = "okay"; }; - usb0: gadget@fffd4000 { + gadget: usb@fffd4000 { atmel,vbus-gpio = <&pioA 8 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9x5.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi index a7456c2191fa..9f5e13296294 100644 --- a/arch/arm/boot/dts/microchip/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi @@ -847,7 +847,7 @@ spi1: spi@f0004000 { status = "disabled"; }; - usb2: gadget@f803c000 { + gadget: usb@f803c000 { compatible = "atmel,at91sam9g45-udc"; reg = <0x00500000 0x80000 0xf803c000 0x400>; @@ -886,7 +886,7 @@ pwm0: pwm@f8034000 { }; }; - usb0: ohci@600000 { + ohci: usb@600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -895,7 +895,7 @@ usb0: ohci@600000 { status = "disabled"; }; - usb1: ehci@700000 { + ehci: usb@700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/at91sam9x5ek.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5ek.dtsi index 9618b8d965b0..f489397458b4 100644 --- a/arch/arm/boot/dts/microchip/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9x5ek.dtsi @@ -144,7 +144,7 @@ &usart0 { status = "okay"; }; -&usb0 { +&ohci { num-ports = <3>; atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */ &pioD 19 GPIO_ACTIVE_LOW @@ -153,11 +153,11 @@ &pioD 20 GPIO_ACTIVE_LOW status = "okay"; }; -&usb1 { +&ehci { status = "okay"; }; -&usb2 { +&gadget { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_board_usb2>; atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/microchip/ethernut5.dts b/arch/arm/boot/dts/microchip/ethernut5.dts index ad7a0850252a..fcc75c522897 100644 --- a/arch/arm/boot/dts/microchip/ethernut5.dts +++ b/arch/arm/boot/dts/microchip/ethernut5.dts @@ -60,7 +60,7 @@ macb0: ethernet@fffc4000 { status = "okay"; }; - usb1: gadget@fffa4000 { + gadget: usb@fffa4000 { atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -101,7 +101,7 @@ data@20000 { }; }; - usb0: ohci@500000 { + ohci: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/evk-pro3.dts b/arch/arm/boot/dts/microchip/evk-pro3.dts index 6d519d02d190..1bcb350ec2bd 100644 --- a/arch/arm/boot/dts/microchip/evk-pro3.dts +++ b/arch/arm/boot/dts/microchip/evk-pro3.dts @@ -35,7 +35,7 @@ usart2: serial@fffb8000 { status = "okay"; }; - usb1: gadget@fffa4000 { + gadget: usb@fffa4000 { atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -45,7 +45,7 @@ watchdog@fffffd40 { }; }; - usb0: ohci@500000 { + ohci: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/mpa1600.dts b/arch/arm/boot/dts/microchip/mpa1600.dts index 005c2758e229..96489d568f5d 100644 --- a/arch/arm/boot/dts/microchip/mpa1600.dts +++ b/arch/arm/boot/dts/microchip/mpa1600.dts @@ -57,7 +57,7 @@ ssc1: ssc@fffd4000 { }; }; - usb0: ohci@300000 { + ohci: usb@300000 { num-ports = <1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/pm9g45.dts b/arch/arm/boot/dts/microchip/pm9g45.dts index c349fd3758a6..202ead5ff464 100644 --- a/arch/arm/boot/dts/microchip/pm9g45.dts +++ b/arch/arm/boot/dts/microchip/pm9g45.dts @@ -139,12 +139,12 @@ data@900000 { }; }; - usb0: ohci@700000 { + ohci: usb@700000 { status = "okay"; num-ports = <2>; }; - usb1: ehci@800000 { + ehci: usb@800000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi index 551b46894f47..f4f654696c65 100644 --- a/arch/arm/boot/dts/microchip/sam9x60.dtsi +++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi @@ -74,7 +74,7 @@ ahb { #size-cells = <1>; ranges; - usb0: gadget@500000 { + gadget: usb@500000 { #address-cells = <1>; #size-cells = <0>; compatible = "microchip,sam9x60-udc"; @@ -88,7 +88,7 @@ usb0: gadget@500000 { status = "disabled"; }; - usb1: ohci@600000 { + ohci: usb@600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -97,7 +97,7 @@ usb1: ohci@600000 { status = "disabled"; }; - usb2: ehci@700000 { + ehci: usb@700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/sama5d2.dtsi b/arch/arm/boot/dts/microchip/sama5d2.dtsi index 5f8e297e19ed..e00bcdfa061b 100644 --- a/arch/arm/boot/dts/microchip/sama5d2.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d2.dtsi @@ -126,7 +126,7 @@ nfc_sram: sram@100000 { }; - usb0: gadget@300000 { + gadget: usb@300000 { compatible = "atmel,sama5d3-udc"; reg = <0x00300000 0x100000 0xfc02c000 0x400>; @@ -136,7 +136,7 @@ usb0: gadget@300000 { status = "disabled"; }; - usb1: ohci@400000 { + ohci: usb@400000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00400000 0x100000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; @@ -145,7 +145,7 @@ usb1: ohci@400000 { status = "disabled"; }; - usb2: ehci@500000 { + ehci: usb@500000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00500000 0x100000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/sama5d3.dtsi b/arch/arm/boot/dts/microchip/sama5d3.dtsi index d4fc0c1dfc10..ac179e5820a8 100644 --- a/arch/arm/boot/dts/microchip/sama5d3.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d3.dtsi @@ -1064,7 +1064,7 @@ nfc_sram: sram@200000 { ranges = <0 0x200000 0x2400>; }; - usb0: gadget@500000 { + gadget: usb@500000 { compatible = "atmel,sama5d3-udc"; reg = <0x00500000 0x100000 0xf8030000 0x4000>; @@ -1074,7 +1074,7 @@ usb0: gadget@500000 { status = "disabled"; }; - usb1: ohci@600000 { + ohci: usb@600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; @@ -1083,7 +1083,7 @@ usb1: ohci@600000 { status = "disabled"; }; - usb2: ehci@700000 { + ehci: usb@700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi index 3652c9e24124..c4afdf729337 100644 --- a/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi @@ -165,14 +165,14 @@ watchdog@fffffe40 { }; }; - usb0: gadget@500000 { + gadget: usb@500000 { atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@600000 { + ohci: usb@600000 { num-ports = <3>; atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH &pioD 26 GPIO_ACTIVE_LOW @@ -181,7 +181,7 @@ &pioD 27 GPIO_ACTIVE_LOW status = "okay"; }; - usb2: ehci@700000 { + ehci: usb@700000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/microchip/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb_cmp.dtsi index 5d9e97fecf83..47b889f7e77b 100644 --- a/arch/arm/boot/dts/microchip/sama5d3xmb_cmp.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d3xmb_cmp.dtsi @@ -216,7 +216,7 @@ watchdog@fffffe40 { }; }; - usb0: gadget@500000 { + gadget: usb@500000 { atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; diff --git a/arch/arm/boot/dts/microchip/sama5d4.dtsi b/arch/arm/boot/dts/microchip/sama5d4.dtsi index 58ceed997889..58cd45a5758e 100644 --- a/arch/arm/boot/dts/microchip/sama5d4.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d4.dtsi @@ -109,7 +109,7 @@ vdec0: vdec@300000 { clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; }; - usb0: gadget@400000 { + gadget: usb@400000 { compatible = "atmel,sama5d3-udc"; reg = <0x00400000 0x100000 0xfc02c000 0x4000>; @@ -119,7 +119,7 @@ usb0: gadget@400000 { status = "disabled"; }; - usb1: ohci@500000 { + ohci: usb@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; @@ -128,7 +128,7 @@ usb1: ohci@500000 { status = "disabled"; }; - usb2: ehci@600000 { + ehci: usb@600000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00600000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/tny_a9263.dts b/arch/arm/boot/dts/microchip/tny_a9263.dts index 62b7d9f9a926..f788bf61ae72 100644 --- a/arch/arm/boot/dts/microchip/tny_a9263.dts +++ b/arch/arm/boot/dts/microchip/tny_a9263.dts @@ -47,7 +47,7 @@ timer@2 { }; }; - usb1: gadget@fff78000 { + gadget: usb@fff78000 { atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi b/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi index 8744b5f6f792..997555441a9a 100644 --- a/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi +++ b/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi @@ -39,7 +39,7 @@ macb0: ethernet@fffc4000 { status = "okay"; }; - usb1: gadget@fffa4000 { + gadget: usb@fffa4000 { atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -111,7 +111,7 @@ data@7ca0000 { }; }; - usb0: ohci@500000 { + ohci: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/usb_a9263.dts b/arch/arm/boot/dts/microchip/usb_a9263.dts index 45745915b2e1..73458f2e5216 100644 --- a/arch/arm/boot/dts/microchip/usb_a9263.dts +++ b/arch/arm/boot/dts/microchip/usb_a9263.dts @@ -52,7 +52,7 @@ macb0: ethernet@fffbc000 { status = "okay"; }; - usb1: gadget@fff78000 { + gadget: usb@fff78000 { atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -139,7 +139,7 @@ data@7ca0000 { }; }; - usb0: ohci@a00000 { + ohci: usb@a00000 { num-ports = <2>; status = "okay"; };