| Message ID | 20240823034314.62305-11-ye.zhang@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] gpio: rockchip: support ACPI | expand |
Hi, On Fri, Aug 23, 2024 at 11:43:13AM +0800, Ye Zhang wrote: > Adds support for Advanced Configuration and Power Interface (ACPI) within > the Rockchip GPIO driver. > > Signed-off-by: Ye Zhang <ye.zhang@rock-chips.com> > --- > drivers/gpio/gpio-rockchip.c | 160 +++++++++++++++++++++++------------ > 1 file changed, 105 insertions(+), 55 deletions(-) > > diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c > index 4f8d50626fcc..9e4a8cd94c66 100644 > --- a/drivers/gpio/gpio-rockchip.c > +++ b/drivers/gpio/gpio-rockchip.c > @@ -6,6 +6,7 @@ > * Copyright (c) 2021 Rockchip Electronics Co. Ltd. > */ > > +#include <linux/acpi.h> > #include <linux/bitops.h> > #include <linux/clk.h> > #include <linux/device.h> > @@ -17,10 +18,12 @@ > #include <linux/module.h> > #include <linux/of.h> > #include <linux/of_address.h> > +#include <linux/of_device.h> Why this is needed for ACPI support? > #include <linux/of_irq.h> > #include <linux/pinctrl/consumer.h> > #include <linux/pinctrl/pinconf-generic.h> > #include <linux/platform_device.h> > +#include <linux/property.h> > #include <linux/regmap.h> > > #include "../pinctrl/core.h" > @@ -210,6 +213,7 @@ static int rockchip_gpio_set_debounce(struct gpio_chip *gc, > freq = clk_get_rate(bank->db_clk); > if (!freq) > return -EINVAL; > + Unrelated whitespace change. > div = (u64)(GENMASK(23, 0) + 1) * 1000000; > if (bank->gpio_type == GPIO_TYPE_V2) > max_debounce = DIV_ROUND_CLOSEST_ULL(div, freq); > @@ -515,7 +519,7 @@ static int rockchip_interrupts_register(struct rockchip_pin_bank *bank) > struct irq_chip_generic *gc; > int ret; > > - bank->domain = irq_domain_add_linear(bank->of_node, 32, > + bank->domain = irq_domain_create_linear(dev_fwnode(bank->dev), 32, > &irq_generic_chip_ops, NULL); I wonder if it would be simpler to first convert the driver to use fwnodes and then in a separate patch, add the ACPI glue? > if (!bank->domain) { > dev_warn(bank->dev, "could not init irq domain for bank %s\n", > @@ -637,25 +641,9 @@ static int rockchip_gpiolib_register(struct rockchip_pin_bank *bank) > return ret; > } > > -static int rockchip_get_bank_data(struct rockchip_pin_bank *bank) > +static void rockchip_gpio_get_ver(struct rockchip_pin_bank *bank) > { > - struct resource res; > - int id = 0; > - > - if (of_address_to_resource(bank->of_node, 0, &res)) { > - dev_err(bank->dev, "cannot find IO resource for bank\n"); > - return -ENOENT; > - } > - > - bank->reg_base = devm_ioremap_resource(bank->dev, &res); > - if (IS_ERR(bank->reg_base)) > - return PTR_ERR(bank->reg_base); > - > - bank->irq = irq_of_parse_and_map(bank->of_node, 0); > - if (!bank->irq) > - return -EINVAL; > - > - id = readl(bank->reg_base + gpio_regs_v2.version_id); > + int id = readl(bank->reg_base + gpio_regs_v2.version_id); > > switch (id) { > case GPIO_TYPE_V2: > @@ -672,8 +660,6 @@ static int rockchip_get_bank_data(struct rockchip_pin_bank *bank) > bank->gpio_type = GPIO_TYPE_V1; > pr_info("Note: Use default GPIO_TYPE_V1!\n"); > } > - > - return 0; > } > > static struct rockchip_pin_bank * > @@ -695,61 +681,120 @@ rockchip_gpio_find_bank(struct pinctrl_dev *pctldev, int id) > return found ? bank : NULL; > } > > +static int rockchip_gpio_of_get_bank_id(struct device *dev) > +{ > + static int gpio; > + int bank_id = -1; Instead of this -1 probably good to use something like -ENODEV or so. Also suggest doing the analogous to ACPI way here so that you have the stub function when CONFIG_OF is not set. This makes it bit more consistent IMO. > + > + if (IS_ENABLED(CONFIG_OF) && dev->of_node) { > + bank_id = of_alias_get_id(dev->of_node, "gpio"); > + if (bank_id < 0) > + bank_id = gpio++; > + } > + > + return bank_id; > +} > + > +#ifdef CONFIG_ACPI > +static int rockchip_gpio_acpi_get_bank_id(struct device *dev) > +{ > + struct acpi_device *adev; > + unsigned long bank_id = -1; Ditto here regarding -1, also this does not need to be initialized at all here. > + const char *uid; > + int ret; > + > + adev = ACPI_COMPANION(dev); > + if (!adev) > + return -ENXIO; Or -ENODEV? And is this even possible? > + > + uid = acpi_device_uid(adev); > + if (!uid || !(*uid)) { There are bunch of helpers for this such as acpi_dev_hid_uid_match() and the like. Not sure if you can use them here but wanted to mention. We use these in Intel driver for example in intel_pinctrl_get_soc_data() in case you want to check an example. Also the !(*uid) looks horrible. Can it be empty string? > + dev_err(dev, "Cannot retrieve UID\n"); > + return -ENODEV; > + } > + > + ret = kstrtoul(uid, 0, &bank_id); > + > + return !ret ? bank_id : -ERANGE; > +} > +#else > +static int rockchip_gpio_acpi_get_bank_id(struct device *dev) > +{ > + return -ENOENT; > +} > +#endif /* CONFIG_ACPI */ > + > static int rockchip_gpio_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > - struct device_node *np = dev->of_node; > - struct device_node *pctlnp = of_get_parent(np); > struct pinctrl_dev *pctldev = NULL; > struct rockchip_pin_bank *bank = NULL; > - struct rockchip_pin_deferred *cfg; > - static int gpio; > - int id, ret; > + int bank_id = 0; > + int ret; > > - if (!np || !pctlnp) > - return -ENODEV; > + bank_id = rockchip_gpio_acpi_get_bank_id(dev); > + if (bank_id < 0) { > + bank_id = rockchip_gpio_of_get_bank_id(dev); > + if (bank_id < 0) > + return bank_id; So here with your of_ function you would get -1 which is -EPERM so which is probably not what you want. > + } > > - pctldev = of_pinctrl_get(pctlnp); > - of_node_put(pctlnp); > - if (!pctldev) > - return -EPROBE_DEFER; > + if (!ACPI_COMPANION(dev)) { > + struct device_node *pctlnp = of_get_parent(dev->of_node); Should it check instead that it has the dev->of_node and not assume that if it does not have ACPI compantion device it is then enumerated from DT? > - id = of_alias_get_id(np, "gpio"); > - if (id < 0) > - id = gpio++; > + pctldev = of_pinctrl_get(pctlnp); > + of_node_put(pctlnp); > + if (!pctldev) > + return -EPROBE_DEFER; > > - bank = rockchip_gpio_find_bank(pctldev, id); > - if (!bank) > - return -EINVAL; > + bank = rockchip_gpio_find_bank(pctldev, bank_id); > + if (!bank) > + return -ENODEV; > + } > > + if (!bank) { > + bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL); > + if (!bank) > + return -ENOMEM; > + } > + > + bank->bank_num = bank_id; > bank->dev = dev; > - bank->of_node = np; > + bank->of_node = dev->of_node; > + > + bank->reg_base = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(bank->reg_base)) > + return PTR_ERR(bank->reg_base); > + > + bank->irq = platform_get_irq(pdev, 0); > + if (bank->irq < 0) > + return bank->irq; > > raw_spin_lock_init(&bank->slock); > > - bank->clk = devm_clk_get(dev, "bus"); > - if (IS_ERR(bank->clk)) { > - bank->clk = of_clk_get(dev->of_node, 0); > + if (!ACPI_COMPANION(dev)) { Ditto here. Also maybe it needs to have separate probe paths for ACPI and DT because this makes it look kind of confusing. > + bank->clk = devm_clk_get(dev, "bus"); > if (IS_ERR(bank->clk)) { > - dev_err(dev, "fail to get apb clock\n"); > - return PTR_ERR(bank->clk); > + bank->clk = of_clk_get(dev->of_node, 0); > + if (IS_ERR(bank->clk)) { > + dev_err(dev, "fail to get apb clock\n"); > + return PTR_ERR(bank->clk); > + } > } > - } > > - ret = rockchip_get_bank_data(bank); > - if (ret) > - return ret; > - > - bank->db_clk = devm_clk_get(dev, "db"); > - if (IS_ERR(bank->db_clk)) { > - bank->db_clk = of_clk_get(dev->of_node, 1); > - if (IS_ERR(bank->db_clk)) > - bank->db_clk = NULL; > + bank->db_clk = devm_clk_get(dev, "db"); > + if (IS_ERR(bank->db_clk)) { > + bank->db_clk = of_clk_get(dev->of_node, 1); > + if (IS_ERR(bank->db_clk)) > + bank->db_clk = NULL; > + } > } > > clk_prepare_enable(bank->clk); > clk_prepare_enable(bank->db_clk); > > + rockchip_gpio_get_ver(bank); > + > /* > * Prevent clashes with a deferred output setting > * being added right at this moment. > @@ -763,8 +808,13 @@ static int rockchip_gpio_probe(struct platform_device *pdev) > } > > while (!list_empty(&bank->deferred_pins)) { > + struct rockchip_pin_deferred *cfg; > + > cfg = list_first_entry(&bank->deferred_pins, > struct rockchip_pin_deferred, head); > + if (!cfg) > + break; > + These changes look unrelated? > list_del(&cfg->head); > > switch (cfg->param) { > @@ -789,7 +839,7 @@ static int rockchip_gpio_probe(struct platform_device *pdev) > mutex_unlock(&bank->deferred_lock); > > platform_set_drvdata(pdev, bank); > - dev_info(dev, "probed %pOF\n", np); > + dev_info(dev, "probed %pfw\n", dev_fwnode(dev)); Is this really useful inro for user to see? > > return 0; > err_unlock: > -- > 2.34.1
diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c index 4f8d50626fcc..9e4a8cd94c66 100644 --- a/drivers/gpio/gpio-rockchip.c +++ b/drivers/gpio/gpio-rockchip.c @@ -6,6 +6,7 @@ * Copyright (c) 2021 Rockchip Electronics Co. Ltd. */ +#include <linux/acpi.h> #include <linux/bitops.h> #include <linux/clk.h> #include <linux/device.h> @@ -17,10 +18,12 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_device.h> #include <linux/of_irq.h> #include <linux/pinctrl/consumer.h> #include <linux/pinctrl/pinconf-generic.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/regmap.h> #include "../pinctrl/core.h" @@ -210,6 +213,7 @@ static int rockchip_gpio_set_debounce(struct gpio_chip *gc, freq = clk_get_rate(bank->db_clk); if (!freq) return -EINVAL; + div = (u64)(GENMASK(23, 0) + 1) * 1000000; if (bank->gpio_type == GPIO_TYPE_V2) max_debounce = DIV_ROUND_CLOSEST_ULL(div, freq); @@ -515,7 +519,7 @@ static int rockchip_interrupts_register(struct rockchip_pin_bank *bank) struct irq_chip_generic *gc; int ret; - bank->domain = irq_domain_add_linear(bank->of_node, 32, + bank->domain = irq_domain_create_linear(dev_fwnode(bank->dev), 32, &irq_generic_chip_ops, NULL); if (!bank->domain) { dev_warn(bank->dev, "could not init irq domain for bank %s\n", @@ -637,25 +641,9 @@ static int rockchip_gpiolib_register(struct rockchip_pin_bank *bank) return ret; } -static int rockchip_get_bank_data(struct rockchip_pin_bank *bank) +static void rockchip_gpio_get_ver(struct rockchip_pin_bank *bank) { - struct resource res; - int id = 0; - - if (of_address_to_resource(bank->of_node, 0, &res)) { - dev_err(bank->dev, "cannot find IO resource for bank\n"); - return -ENOENT; - } - - bank->reg_base = devm_ioremap_resource(bank->dev, &res); - if (IS_ERR(bank->reg_base)) - return PTR_ERR(bank->reg_base); - - bank->irq = irq_of_parse_and_map(bank->of_node, 0); - if (!bank->irq) - return -EINVAL; - - id = readl(bank->reg_base + gpio_regs_v2.version_id); + int id = readl(bank->reg_base + gpio_regs_v2.version_id); switch (id) { case GPIO_TYPE_V2: @@ -672,8 +660,6 @@ static int rockchip_get_bank_data(struct rockchip_pin_bank *bank) bank->gpio_type = GPIO_TYPE_V1; pr_info("Note: Use default GPIO_TYPE_V1!\n"); } - - return 0; } static struct rockchip_pin_bank * @@ -695,61 +681,120 @@ rockchip_gpio_find_bank(struct pinctrl_dev *pctldev, int id) return found ? bank : NULL; } +static int rockchip_gpio_of_get_bank_id(struct device *dev) +{ + static int gpio; + int bank_id = -1; + + if (IS_ENABLED(CONFIG_OF) && dev->of_node) { + bank_id = of_alias_get_id(dev->of_node, "gpio"); + if (bank_id < 0) + bank_id = gpio++; + } + + return bank_id; +} + +#ifdef CONFIG_ACPI +static int rockchip_gpio_acpi_get_bank_id(struct device *dev) +{ + struct acpi_device *adev; + unsigned long bank_id = -1; + const char *uid; + int ret; + + adev = ACPI_COMPANION(dev); + if (!adev) + return -ENXIO; + + uid = acpi_device_uid(adev); + if (!uid || !(*uid)) { + dev_err(dev, "Cannot retrieve UID\n"); + return -ENODEV; + } + + ret = kstrtoul(uid, 0, &bank_id); + + return !ret ? bank_id : -ERANGE; +} +#else +static int rockchip_gpio_acpi_get_bank_id(struct device *dev) +{ + return -ENOENT; +} +#endif /* CONFIG_ACPI */ + static int rockchip_gpio_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct device_node *np = dev->of_node; - struct device_node *pctlnp = of_get_parent(np); struct pinctrl_dev *pctldev = NULL; struct rockchip_pin_bank *bank = NULL; - struct rockchip_pin_deferred *cfg; - static int gpio; - int id, ret; + int bank_id = 0; + int ret; - if (!np || !pctlnp) - return -ENODEV; + bank_id = rockchip_gpio_acpi_get_bank_id(dev); + if (bank_id < 0) { + bank_id = rockchip_gpio_of_get_bank_id(dev); + if (bank_id < 0) + return bank_id; + } - pctldev = of_pinctrl_get(pctlnp); - of_node_put(pctlnp); - if (!pctldev) - return -EPROBE_DEFER; + if (!ACPI_COMPANION(dev)) { + struct device_node *pctlnp = of_get_parent(dev->of_node); - id = of_alias_get_id(np, "gpio"); - if (id < 0) - id = gpio++; + pctldev = of_pinctrl_get(pctlnp); + of_node_put(pctlnp); + if (!pctldev) + return -EPROBE_DEFER; - bank = rockchip_gpio_find_bank(pctldev, id); - if (!bank) - return -EINVAL; + bank = rockchip_gpio_find_bank(pctldev, bank_id); + if (!bank) + return -ENODEV; + } + if (!bank) { + bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL); + if (!bank) + return -ENOMEM; + } + + bank->bank_num = bank_id; bank->dev = dev; - bank->of_node = np; + bank->of_node = dev->of_node; + + bank->reg_base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(bank->reg_base)) + return PTR_ERR(bank->reg_base); + + bank->irq = platform_get_irq(pdev, 0); + if (bank->irq < 0) + return bank->irq; raw_spin_lock_init(&bank->slock); - bank->clk = devm_clk_get(dev, "bus"); - if (IS_ERR(bank->clk)) { - bank->clk = of_clk_get(dev->of_node, 0); + if (!ACPI_COMPANION(dev)) { + bank->clk = devm_clk_get(dev, "bus"); if (IS_ERR(bank->clk)) { - dev_err(dev, "fail to get apb clock\n"); - return PTR_ERR(bank->clk); + bank->clk = of_clk_get(dev->of_node, 0); + if (IS_ERR(bank->clk)) { + dev_err(dev, "fail to get apb clock\n"); + return PTR_ERR(bank->clk); + } } - } - ret = rockchip_get_bank_data(bank); - if (ret) - return ret; - - bank->db_clk = devm_clk_get(dev, "db"); - if (IS_ERR(bank->db_clk)) { - bank->db_clk = of_clk_get(dev->of_node, 1); - if (IS_ERR(bank->db_clk)) - bank->db_clk = NULL; + bank->db_clk = devm_clk_get(dev, "db"); + if (IS_ERR(bank->db_clk)) { + bank->db_clk = of_clk_get(dev->of_node, 1); + if (IS_ERR(bank->db_clk)) + bank->db_clk = NULL; + } } clk_prepare_enable(bank->clk); clk_prepare_enable(bank->db_clk); + rockchip_gpio_get_ver(bank); + /* * Prevent clashes with a deferred output setting * being added right at this moment. @@ -763,8 +808,13 @@ static int rockchip_gpio_probe(struct platform_device *pdev) } while (!list_empty(&bank->deferred_pins)) { + struct rockchip_pin_deferred *cfg; + cfg = list_first_entry(&bank->deferred_pins, struct rockchip_pin_deferred, head); + if (!cfg) + break; + list_del(&cfg->head); switch (cfg->param) { @@ -789,7 +839,7 @@ static int rockchip_gpio_probe(struct platform_device *pdev) mutex_unlock(&bank->deferred_lock); platform_set_drvdata(pdev, bank); - dev_info(dev, "probed %pOF\n", np); + dev_info(dev, "probed %pfw\n", dev_fwnode(dev)); return 0; err_unlock:
Adds support for Advanced Configuration and Power Interface (ACPI) within the Rockchip GPIO driver. Signed-off-by: Ye Zhang <ye.zhang@rock-chips.com> --- drivers/gpio/gpio-rockchip.c | 160 +++++++++++++++++++++++------------ 1 file changed, 105 insertions(+), 55 deletions(-)